Anvils & Forming Stakes

Anvils are often used in a similar way to bench blocks, they provide a sturdy surface for you to pound on and are excellent for shaping metal. 

Stakes are used to form bracelets, pendants, bezels or to form hollow back rings. They can be used to perform other metalsmithing tasks, but on a much smaller scale.

Showing 14 of 14 products
Filter Products

Filter Products

Showing 14 of 14 products

Availability
Clear
Price

The highest price is $89.20

$
$
Clear
  • Anvil - Double-Horn

    $28.00

    $28.00
    Anvil - Double-Horn
    Anvil - Double-Horn This round base anvil has one flat and one round horn and is made from forged steel. A must for all professional jewelers to make jobs easier.
  • Anvil - Hexagon Riveting video Copper Riveted Bracelet Project

    $13.20

    $13.20
    Anvil - Hexagon Riveting
    Anvil - Hexagon Riveting Used as a base for riveting, drilling and staking small parts, our hex anvil is case hardened and well polished for long life.Features: Fifteen holes from 3/64" to 1/4" ...
  • Bench Pin with Anvil mounted to bench

    $18.25

    $18.25
    Bench Pin with Anvil
    Bench Pin and Anvil The bench pin is one of the most necessary tools in the serious jewelry artist's toolbox. This quality bench pin has a polished anvil top for hammering. Wood pin is removable an...
  • Horn Anvil Hardened steel horn anvil. Use the little horn end to get at tight spots to harden wires, shape or form metal. 1 lb.

    $19.15

    $19.15
    Horn Anvil
    Horn Anvil Hardened steel horn anvil. Use the little horn end to get at tight spots to harden wires, shape or form metal. 1 lb.
  • Mini Horn Anvil One flat horn and one round horn for shaping. Hole in top for riveting and bending. Use to hammer and form wire and metal. Made of hardened steel to resist dents.

    $17.15

    $17.15
    Mini Horn Anvil
    Mini Horn Anvil One flat horn and one round horn for shaping. Hole in top for riveting and bending. Use to hammer and form wire and metal. Made of hardened steel to resist dents.
  • Fretz Forming Stake - Convex/Concave

    $63.90

    $63.90
    Fretz Forming Stake - Convex/Concave
    Forming Stake - Convex/Concave Fretz miniature metalsmithing forming stakes are made of hardened 420 stainless steel and feature highly polished surfaces. The Convex/Concave forming stake features ...
  • Fretz Forming Stake - Horn Fretz Forming Stake - Horn

    $59.90

    $59.90
    Fretz Forming Stake - Horn
    Forming Stake - Horn Fretz miniature metalsmithing forming stakes are made of hardened 420 stainless steel and feature highly polished surfaces. The Horn forming stake features a concave center wit...
  • Carbide Stylus for Foredom Hammer Handpieces. Carbide stylus threaded anvil point for Foredom Flex Shaft Handpieces. Used for marking or scribing hardened steel. It is has a steel bottom and a tungsten carbide top. Fits 1/8 and standard 3mm thread

    $45.20

    $45.20
    Carbide Stylus Anvil Point
    Carbide Stylus Carbide Stylus for Foredom Hammer Handpieces. Carbide stylus threaded anvil point for Foredom Flex Shaft Handpieces. Used for marking or scribing hardened steel. It is has a steel bo...
  • metal Cylinder Anvil Point 7/32"

    $19.45

    $19.45
    Cylinder Anvil Point 7/32"
    Cylinder Anvil Point 7/32" Cylinder Anvil Point for Foredom Hammer Handpieces. Made in the USA
  • Diamond Tip Pave Anvil Point Diamond tip pave point threaded anvil for Foredom Flex Shaft Handpieces. Used for special texturing. It is made of steel with a diamond point bezel set into the tip. Fits 1/8 and standard 3mm thread.

    $45.20

    $45.20
    Diamond Tip Pave Anvil Point
    Diamond Tip Pave Anvil Point Diamond tip pave point threaded anvil for Foredom Flex Shaft Handpieces. Used for special texturing. It is made of steel with a diamond point bezel set into the tip. Fi...
  • metal Flat Top Tapered Anvil

    $9.75

    $9.75
    Flat Top Tapered Anvil
    Flat Top Tapered Anvil Flat Top Tapered Anvil for Foredom Hammer Handpieces.
  • Rectangle Anvil Point 3/32" x 1/16" This rectangle threaded anvil point for Foredom Flex Shaft Handpieces. It is heat treated steel made to the finest specifications and finished with black oxide. Fits 1/8 and standard 3mm thread.

    $19.45

    $19.45
    Rectangle Anvil Point 3/32" x 1/16"
    Rectangle Anvil Point 3/32" x 1/16" This rectangle threaded anvil point for Foredom Flex Shaft Handpieces. It is heat treated steel made to the finest specifications and finished with black oxide. ...
  • Ball Nose Anvil Point

    $14.60

    $14.60
    Ball Nose Anvil Point 3/32"
    Ball Nose Point 3/32" This ball nose threaded anvil point for Foredom Flex Shaft Handpieces. It is heat treated steel made to the finest specifications and finished with black oxide. Fits 1/8 and s...
  • Foredom Anvil Points 6 Piece Kit in container

    $89.20

    $89.20
    Anvil Points 6 Piece Kit
    Foredom Anvil Points 6 Piece Kit Accessory Kit for Foredom Hammer Handpieces. These six threaded anvil points for Foredom Flex Shaft Handpieces. They are heat treated steel made to the finest speci...

Showing 1 -14 of 14 items

Anvils & Forming Stakes

Anvils are often used in a similar way to bench blocks, they provide a sturdy surface for you to pound on and are excellent for shaping metal. 

Stakes are used to form bracelets, pendants, bezels or to form hollow back rings. They can be used to perform other metalsmithing tasks, but on a much smaller scale.