These kilns ship free to destinations in the U.S.
UltraLite Studio Kiln is a table top jewelry kiln used to fire FS999 Fine Silver Clay, EZ960 Sterling Silver Clay, PMC and Art Clay Silver. This kiln is not recommended for Metal Magic Clay. It will fire glass cabochons, over glaze enamels and is good for metal annealing and heat treating. The UltraLite is also popular with jewelers world-wide for working with granulation, keum boo, and enameling techniques. And, it's possible to fuse small glass projects as well.
The 120V UltraLite Studio Kiln Features:
Larger 3.5” Element creates a Larger Heat Sink (which means more available heat)
Compact size of 6" Tall x 6.25" Round
Weighs less than 2 pounds
Firing Surface of 3.5" Diameter x 1.5" Height
1600°F / 871°C Maintained Operating Temperature
Energy Effect High Temperature Stand
6’ Removable Cord-Set
High Temperature Hot Pad
All of the Accessories for the Beehive Model are Interchangeable with the Studio Model
Standard 120 Volt household power
This 250 Watt Kiln costs less than .02 cents per firing to operate
The UltraLite Studio Kilns are a small and handy firing device. While intended for enameling, these kilns can also be used for firing
silver and gold metal clays only. The UltraLite Kilns cannot fire base metal clays. This is a good choice for those who want an inexpensive option at a modest price. The Keum Boo kit will allow you to use this kiln to add pure gold leaf to your metal clay and other jewelry creations. The UltraLite Studio kiln can also fire Accent Silver with the flat cover in place. Please note: The flat cover should only be used for 3 - 5 minutes at a time.
International Customers, please note: The 240 V Temperature Controller is needed for the 240 V Studio Kiln. The 120 V Controller will not work with the 240 V Kiln. 240 V Kiln comes with a Euro Plug. If you do not have a Euro Plug, a standard adapter will be needed.
The Kiln is shipped ready to use for granulation and enameling. Spatula Included.
This product includes a 90 day limited manufacturers warranty.
We do not recommend firing dimensional pieces in these kilns.
Please note: The controller and ceramic inserts are required for proper firing with both kilns.
Click here for complete firing instructions.
Please note: It is recommended to use a thin layer of kiln wash or mica on the element surface while enameling to protect the surface.