36 Hole Drill Stand
Marked with numbers for easy size identification of small twist drills sizes 33 through 80. Stand is 5" x 2" and makes drill access fast accurate and easy.
Assorted Diamond Burs - Set of 20
3/32" (2.35mm) Shank, 150 Grit
This assortment of diamond impregnated rotary burs features a variety of 20 different types:
Cylinder, Tree, Ball, Cone, Wheel, and ...
Bits - Diamond 10 Piece Set - 3/32" Shank
Perfect set for carving metal clay greenware. Insert bit into a pin vice and rub greenware to sand and carve. Variety of tip shapes gets into every nook an...
Bits - Diamond 30 Piece Set - 1/8" Shank
Perfect set for carving metal clay greenware. Insert bit into a pin vice and rub greenware to sand and carve. Extra large variety of tip shapes gets into ev...
Brass Collet - 1/16"
Replacement Brass collet for rotary tools.
Holds bits with a 1/16 inch shank
Generic replacement for Dremel 482 collet
Compatible with Dremel 225 Flex-Shaft attachment
For use ...
Brass Collet Set
4 piece set
1/32 inch collet
1/16 inch collet
3/32 inch collet
1/8 inch collet
Replacement for Dremel 480, 481, 482, and 483 Collets
For use in rotary tools
Carving Set - Diamond - 20 Piece - 3/32" shank
20 piece set of diamond coated bits. These are especially handy for carving and shaping dry clay. Install in the swivel pin vice and carve away. When ...
Collet Adapter - 3.0mm - 3/32"
Step down adapters that fit inside a collet and allow the use of smaller shank size accessories without having to change handpiece collets.
Cup Bur - Wire Rounding
Before forming wire, take a moment to round the end using a cup bur. This is especially important on the end of an ear wire to clean up the ragged cut end. Use in a swivel p...
Deluxe Swiss Tungsten Vanadium 45 degree Hart Burs
Made of the finest Swiss-milled Vanadium steel for long life and accuracy. This set includes 0.9, 1, 1.2, 1.4, 1.5, 1.8, 2.1, 2.3, 2.5, 2.7, 2.9, ...
Deluxe Swiss Tungsten Vanadium Cup Burs with Wooden Stand Set
Made of the finest Swiss-milled Vanadium steel for long life and accuracy. This set includes 0.9, 1, 1.2, 1.4, 1.5, 1.6, 1.8, 2.0, 2.3,...
Deluxe Swiss Tungsten Vanadium Round Burs
Made of the finest Swiss-milled Vanadium steel for long life and accuracy. This set includes 0.8, 0.9, 1, 1.5, 1.8, 2.1, 2.5, 2.9, 3.5, 4, 4.5, and 5mm bur...
Deluxe Swiss Tungsten Vanadium Setting Burs
Made of the finest Swiss-milled Vanadium steel for long life and accuracy.
This set includes 1, 1.2, 1.5, 1.7, 2, 2.2, 2.5, 3, 3.5, 4, 4.5, and 5mm burs....
Dormer Twist Drills
Made of the highest grade tempered tool steel and precision milled, these twist drills are the choice for long life. Choose these drills for metal drilling operations. Lubricati...
Drill - Diamond Coated Swiss
Diamond coated drills are the very best for drilling through hard materials such as bronze, brass, steel, and fragile materials such as glass and ceramic. *Diameter is ...
Drill Set - 6 Piece
This handy little set comes with 6 drills for any project. Stay organized with the storage vial that keeps all the drill bits inside the handle, making it very convenient. Keep ...
Drill Set - 6 Piece - Replacement Drills
This handy little set comes with 6 drills for any project. Drill sizes included: 1.6mm, 1.18mm, 1.02mm, .88mm, .71mm, .57mm. Replacement Drills for Item #DR...
Drill Set - Diamond coated Swiss - 6 Piece
3/32" shank. Diamond coated drills are the very best for drilling through hard materials such as bronze, brass, steel, and fragile materials such as glass...
Drill Set - Twist - 12 Piece
Polished steel twist drills with uniform 3/32" shanks can be used with all quick-change or Jacobs chuck-style hand pieces. We recommend using the Swivel Top Pin Vice wi...
Drill Set with Case - Twist - 20 Piece
One of each drill size No. 61 to 80 is included. The set is conveniently packaged in a plastic stand with clear domed lid. Sizes stamped on stand for easy sel...
Drill Set with Pouch - #41 - #60 - 20 Piece
This 20-piece high speed steel set includes one each of # 41 through 60 in a pouch that's numbered for easy identification.
Drill Sizes Included .040"-.096"
Drilling Set - Diamond Core - 6 Piece
Nickel-plated with 180-grit industrial diamonds. Drills are hollow.Shanks vary with head size. All drills are 35.8mm long; head length is 4.2mm. This kit has 6...
Foredom Collet Adapters
These are NOT collets. You can use them with Foredom Flex Shaft Handpieces or Micromotor Handpieces — as long as the handpiece has a collet. They are ‘step down’ adapters th...
Hand Drill Set - 11 Piece
This handy little set comes with 10 drills for any project. Comes with 2 drill bits of each of the following sizes: 1mm, 1.5mm, 2mm, 2.5mm, 3mm.
HSS Drill Set with Metal Case - Twist - 20 Piece
Made of high-speed steel, this handy drill index offers sizes 61-80 for fine jobs. All drills are handily marked by size, finely ground and heat-tre...
Inverted Cone Drills
Made of the finest European-milled Vanadium steel for long life and accuracy. All burs are total length of 44.5mm with 3/32 -2.35mm- shanks for quick-change handpieces. Our bur...
Knife Edge Wheel Diamond Bur - 4mm - Pkg /1
Shape, grind and finish with precision! This high-quality, long-wearing diamond bur offers the hardness of diamond plated over steel to provide uniform ...
Magnetic Bur Stand
This magnetic bur holder keeps burs readily available for the busy jeweler. Made of high impact plastic with an extra strong magnet for quick retrieval of burs, drills and other ...
Micro Diamond Burs - Set/10
Set of 10 Micro Diamond Burs. This set includes the following Standard Grit 2 Pieces: BR-30, BR-31, BR-40, BR-41, BR-45, BR-49, FO-25, FO-32, SF-21, and TC-26.
Micro Diamond Burs - Set/10 in Stand
Set of 10 Micro Diamond Burs in handy stand so they don't get lost. This set includes the following Standard Grit 2 Pieces: BR-30, BR-31, BR-40, BR-41, BR-45, B...
Drill PrMini Bench Drill Press
This small bench drill is multi-speed and perfect for the studio jeweler. Drill with ease and accuracy.
Specs:
110V
100 watts
60 hz
1.1 amp
drilling stroke: 1" (dept...
Pin Vise - Swivel Top
Use to hold drills for hand drilling. The round swivel top rests in the palm while fingers turn the drill. Offers multiple chucks to fit all your bits from 0 to 3.3mm. The swi...
Pin Vise Hand Drill Set with Mini Drills and Twist Drills
This Steel hand drill/pin vise comes with 10 pieces of mini drills and 10 pieces of twist drills in 10 different sizes. Use for any hobby o...
Pink Quartz Grinding Stones - Set of 12
Grinding stones can be used for deburring and polishing.
3/32 inch shank
1-5/8 inches to 2 inches long overall
Pink Quartz Grinding Stones
Replacement Drill Bits
Made of the highest grade tempered tool steel and precision milled, these twist drills are the choice for long life. Choose these drills for metal drilling operations. Lubric...
Round Burs
Made of the finest European-milled Vanadium steel for long life and accuracy. All burs are total length of 44.5mm with 3/32 -2.35mm- shanks for quick-change handpieces. These burs are th...
Round Pink Grinding Stone - 80 Grit - 1/2"
1/2 inch diameter round ball
1/8 inch shank
2 inches long overall
Pink aluminum oxide
Medium - Soft bonded construction
Maximum 60,000 RPM with one inch o...
Spiral Hand Drill
Used for fine work this European-made drill is spring-loaded with a steel chuck. Drill is 4-1/2" long and accepts No. 69 through No. 80 drills.
Steel Micro Drill Bits Set - .8mm - 3mm
These drill bits are made of steel and come in a handy plastic box to keep separated during storage. Use on their own or with the Pin Vise Hand Drill Set.
Th...
Stone Setting Burs
Use to cut a seat for a faceted round stone in metal or greenware. Made of the finest Swiss-milled Vanadium steel for long life and accuracy. Overall length is 44.5mm with 3/32" ...
Stone Setting Bur Set
Use to cut a seat for a faceted round stone in metal or greenware. Made of the finest Swiss-milled Vanadium steel for long life and accuracy. Overall length is 44.5mm with 3/3...
Tungsten Alloy Drill Bit Set - 10 Piece
10 Piece set of Tungsten Alloy Drill Bits for Greenware, Wood, Plastic, Aluminum Alloy. Quick Change. Use with pin vise or your own hand. Grip makes it easy ...
Whaley Hand Vise
This 6" hand vise from Whaley has a large ergonomic grip to make use easy and comfortable. Large knurled chuck opens from 0 - 6mm and tightens easily. It has a flat sided handle wh...
Showing 1 -47 of 47 items
Drills & Burs
These Drills and Burs are great for drilling, carving and shaping metal clay and metalsmithing. This section has exactly what you need no matter what size project.
Compare several individual drills and burs or buy one of our great sets. Don't forget to check out our many types of holders to keep your work area organized and clean.
Choosing the correct burs
Selecting the correct bur can seem daunting. We have a wide selection to choose from. Here is a simple guide of a few burs to help in selection.
Diamond burs: Best for carving and sculpting.
Stone setting bur: Use these sets to cut a seat for faceted round stones in metal.
Choosing a selection results in a full page refresh.