 |
Art Clay Silver Overlay Paste - 15 gmThis silver metal clay is perfect for use with glass, ceramic, silver and settings.
Click on our "TechSpecs" & "Product Tips" tab above for firing instructions and additional information.
General Firing Instructions
Note: Crash cooling may cause cracking.
|
|
|
|
Uses
|
This clay is perfect for use with glass, silver and settings
|
|
Workability
|
Art Clay Silver Overlay Paste is a low fire, slow dry paste. Dilute, or rehydrate with small amounts of distilled water until it reaches desired consistency.
|
|
Embedded Objects
|
Any object that can withstand the firing temperatures and times noted below below can be embedded and fired in place. This includes glass, some natural gemstones, lab gems, cubic zirconia and porcelain. Check out our Gemstone Firing Guide for details on a specific stone.
|
|
Firing Options
|
|
Temperature
|
Hold Time
|
|
Kiln
|
1200°F / 649°C
1290°F / 699°C
1380°F / 749°C
1472°F / 800°C
|
30 min
15 min
10 min
5 min
|
|
Torch
|
Red Glow
|
5 min (varies with thickness)
|
|
|
|
Some silver settling may occur at bottom of the jar. Stir the paste well with a brush or metal spatula before use. This
product is water-based and can dry. Always keep the container tightly capped. If it dries, add a small amount of distilled water to
rehydrate.
To dilute the paste, take out the necessary amount and place it in a separate container. Then, add distilled water a drop at a time. Do not dilute it directly in the jar.
|
|
|