YOU ARE HERE: Home > Embellishments > Epoxies and Resins
Sort by:
Page of 1
Safety Solvent - 1 oz Safety Solvent - 1 oz

Safety Solvent - 1 oz

Features

  • Aves® Safety Solvent is safer than most all solvents available.
  • Conforms to ASTM D4236.
  • Great replacement for acetone & other commonly used toxic solvents.
  • Clear liquid. Low flammability, high flash point. Low odor and fumes.
  • Freeze-thaw Stable, Incredible shelf life!
  • DOT Certified for shipping by air, land or sea.
  • Does NOT contain alcohol, M.E.K.P, paint thinners or other harmful substances found in similar products.
  • Companion product for use with Aves® 2-part products and other epoxies.
  • Aves® Safety Solvent comes in a flip-top plastic squeeze bottle

    • Price: $4.00
    Two-part Epoxy Clay - Erinite Two-part Epoxy Clay - Erinite

    Two-part Epoxy Clay - Erinite

    Instructions:

    1. Combine equal portions of the two epoxy parts (color and white base) and knead them together until the clay is uniform in color.
    2. Adhere clay to a surface such as a bezel or mold it into a shape.
    3. Affix chaton pointed back stones, flat backs or other decorative items.

    Price: $8.65
    New Price: $4.75
    Two-part Epoxy Clay - Peridot Two-part Epoxy Clay - Peridot

    Two-part Epoxy Clay - Peridot

    Instructions:

    1. Combine equal portions of the two epoxy parts (color and white base) and knead them together until the clay is uniform in color.
    2. Adhere clay to a surface such as a bezel or mold it into a shape.
    3. Affix chaton pointed back stones, flat backs or other decorative items.

    Price: $8.65
    New Price: $4.75
    Two-part Epoxy Clay - Olivine Two-part Epoxy Clay - Olivine

    Two-part Epoxy Clay - Olivine

    Instructions:

    1. Combine equal portions of the two epoxy parts (color and white base) and knead them together until the clay is uniform in color.
    2. Adhere clay to a surface such as a bezel or mold it into a shape.
    3. Affix chaton pointed back stones, flat backs or other decorative items.

    Price: $8.65
    New Price: $4.75
    Two-part Epoxy Clay - Khaki Two-part Epoxy Clay - Khaki

    Two-part Epoxy Clay - Khaki

    Instructions:

    1. Combine equal portions of the two epoxy parts (color and white base) and knead them together until the clay is uniform in color.
    2. Adhere clay to a surface such as a bezel or mold it into a shape.
    3. Affix chaton pointed back stones, flat backs or other decorative items.

    Price: $8.65
    New Price: $4.75
    Two-part Epoxy Clay - Lime Two-part Epoxy Clay - Lime

    Two-part Epoxy Clay - Lime

    Instructions:

    1. Combine equal portions of the two epoxy parts (color and white base) and knead them together until the clay is uniform in color.
    2. Adhere clay to a surface such as a bezel or mold it into a shape.
    3. Affix chaton pointed back stones, flat backs or other decorative items.

    Price: $8.65
    New Price: $4.75
    Two-part Epoxy Clay - Jonquil Two-part Epoxy Clay - Jonquil

    Two-part Epoxy Clay - Lime

    Instructions:

    1. Combine equal portions of the two epoxy parts (color and white base) and knead them together until the clay is uniform in color.
    2. Adhere clay to a surface such as a bezel or mold it into a shape.
    3. Affix chaton pointed back stones, flat backs or other decorative items.

    Price: $8.65
    New Price: $4.75
    Two-part Epoxy Clay - Vintage Rose Two-part Epoxy Clay - Vintage Rose

    Two-part Epoxy Clay - Vintage Rose

    Instructions:

    1. Combine equal portions of the two epoxy parts (color and white base) and knead them together until the clay is uniform in color.
    2. Adhere clay to a surface such as a bezel or mold it into a shape.
    3. Affix chaton pointed back stones, flat backs or other decorative items.

    Price: $8.65
    New Price: $4.75
    Apoxie® Sculpt Two-part Modeling Compound - Yellow Apoxie® Sculpt Two-part Modeling Compound - Yellow - 1/10 LB

    Apoxie® Sculpt Two-part Modeling Compound

    Features:

  • Self-Hardening
  • Putty-like consistency
  • 1-3 hour working time
  • Highly Adhesive
  • Superior Detail
  • 0% Shrinkage & Cracking
  • Hard & Durable
  • Semi-gloss finish
  • Waterproof
  • Non-flammable
  • Marine & Exterior Quality
  • Freeze-thaw Stable
  • 12 Vibrant Colors: Natural, White, Black, Brown, Orange, Yellow, Green, Blue, Red, Pink, Silver-Grey-Grey, Bronze

    • Working Time Line Guide:
    1/2 hour: Sticky & most adhesive
    1 to 2 hours: Easy to work with
    2 to 3 hours: Setting up, form-able detail
    24 hours: Hard, cured & waterproof

    Tips:
  • Can be seamlessly feathered before set-up with a paint brush and the use of Aves®Safety Solvent for fine details; use water for smoothing large surface areas of your project.
  • Try rubbing a bit of extra virgin olive oil on your finger tips to keep the product from sticking.
  • Dipping your tools & fingers in cold water will keep Apoxie Sculpt from sticking to your surfaces and allow maximum details.
  • Create new colors of Apoxie Sculpt by mixing any of the part ‘A’ colors of Apoxie Sculpt together, then add an equal amount of part ‘B’ (all part A’s are the same, and all part B’s are the same)
  • Embellish with; tiles, glass, beads, stones, gems, crystals more!
  • Works excellent with gold leaf and mica powers!

    • View or download a color chart to learn how to mix Apoxie to make unlimited colors.Click here

    Price: $8.00
    Apoxie® Sculpt Two-part Modeling Compound - Green Apoxie® Sculpt Two-part Modeling Compound - Green - 1/10 LB

    Apoxie® Sculpt Two-part Modeling Compound

    Features:

  • Self-Hardening
  • Putty-like consistency
  • 1-3 hour working time
  • Highly Adhesive
  • Superior Detail
  • 0% Shrinkage & Cracking
  • Hard & Durable
  • Semi-gloss finish
  • Waterproof
  • Non-flammable
  • Marine & Exterior Quality
  • Freeze-thaw Stable
  • 12 Vibrant Colors: Natural, White, Black, Brown, Orange, Yellow, Green, Blue, Red, Pink, Silver-Grey-Grey, Bronze

    • Working Time Line Guide:
    1/2 hour: Sticky & most adhesive
    1 to 2 hours: Easy to work with
    2 to 3 hours: Setting up, form-able detail
    24 hours: Hard, cured & waterproof

    Tips:
  • Can be seamlessly feathered before set-up with a paint brush and the use of Aves®Safety Solvent for fine details; use water for smoothing large surface areas of your project.
  • Try rubbing a bit of extra virgin olive oil on your finger tips to keep the product from sticking.
  • Dipping your tools & fingers in cold water will keep Apoxie Sculpt from sticking to your surfaces and allow maximum details.
  • Create new colors of Apoxie Sculpt by mixing any of the part ‘A’ colors of Apoxie Sculpt together, then add an equal amount of part ‘B’ (all part A’s are the same, and all part B’s are the same)
  • Embellish with; tiles, glass, beads, stones, gems, crystals more!
  • Works excellent with gold leaf and mica powers!

    • Check out this color chart to learn how to mix Apoxie to make unlimited colors. Click here

    Price: $8.00
    Apoxie® Sculpt Two-part Modeling Compound - Blue Apoxie® Sculpt Two-part Modeling Compound - Blue - 1/10 LB

    Apoxie® Sculpt Two-part Modeling Compound

    Features:

  • Self-Hardening
  • Putty-like consistency
  • 1-3 hour working time
  • Highly Adhesive
  • Superior Detail
  • 0% Shrinkage & Cracking
  • Hard & Durable
  • Semi-gloss finish
  • Waterproof
  • Non-flammable
  • Marine & Exterior Quality
  • Freeze-thaw Stable
  • 12 Vibrant Colors: Natural, White, Black, Brown, Orange, Yellow, Green, Blue, Red, Pink, Silver-Grey-Grey, Bronze

    • Working Time Line Guide:
    1/2 hour: Sticky & most adhesive
    1 to 2 hours: Easy to work with
    2 to 3 hours: Setting up, form-able detail
    24 hours: Hard, cured & waterproof

    Tips:
  • Can be seamlessly feathered before set-up with a paint brush and the use of Aves®Safety Solvent for fine details; use water for smoothing large surface areas of your project.
  • Try rubbing a bit of extra virgin olive oil on your finger tips to keep the product from sticking.
  • Dipping your tools & fingers in cold water will keep Apoxie Sculpt from sticking to your surfaces and allow maximum details.
  • Create new colors of Apoxie Sculpt by mixing any of the part ‘A’ colors of Apoxie Sculpt together, then add an equal amount of part ‘B’ (all part A’s are the same, and all part B’s are the same)
  • Embellish with; tiles, glass, beads, stones, gems, crystals more!
  • Works excellent with gold leaf and mica powers!

    • Check out this color chart to learn how to mix Apoxie to make unlimited colors. Click here

    Price: $8.00
    Apoxie® Sculpt Two-part Modeling Compound - Orange Apoxie® Sculpt Two-part Modeling Compound - Orange - 1/10 LB

    Apoxie® Sculpt Two-part Modeling Compound

    Features:

  • Self-Hardening
  • Putty-like consistency
  • 1-3 hour working time
  • Highly Adhesive
  • Superior Detail
  • 0% Shrinkage & Cracking
  • Hard & Durable
  • Semi-gloss finish
  • Waterproof
  • Non-flammable
  • Marine & Exterior Quality
  • Freeze-thaw Stable
  • 12 Vibrant Colors: Natural, White, Black, Brown, Orange, Yellow, Green, Blue, Red, Pink, Silver-Grey-Grey, Bronze

    • Working Time Line Guide:
    1/2 hour: Sticky & most adhesive
    1 to 2 hours: Easy to work with
    2 to 3 hours: Setting up, form-able detail
    24 hours: Hard, cured & waterproof

    Tips:
  • Can be seamlessly feathered before set-up with a paint brush and the use of Aves®Safety Solvent for fine details; use water for smoothing large surface areas of your project.
  • Try rubbing a bit of extra virgin olive oil on your finger tips to keep the product from sticking.
  • Dipping your tools & fingers in cold water will keep Apoxie Sculpt from sticking to your surfaces and allow maximum details.
  • Create new colors of Apoxie Sculpt by mixing any of the part ‘A’ colors of Apoxie Sculpt together, then add an equal amount of part ‘B’ (all part A’s are the same, and all part B’s are the same)
  • Embellish with; tiles, glass, beads, stones, gems, crystals more!
  • Works excellent with gold leaf and mica powers!

    • Check out this color chart to learn how to mix Apoxie to make unlimited colors. Click here

    Price: $8.00
    Apoxie® Sculpt Two-part Modeling Compound - Red Apoxie® Sculpt Two-part Modeling Compound - Red - 1/10 LB

    Apoxie® Sculpt Two-part Modeling Compound

    Features:

  • Self-Hardening
  • Putty-like consistency
  • 1-3 hour working time
  • Highly Adhesive
  • Superior Detail
  • 0% Shrinkage & Cracking
  • Hard & Durable
  • Semi-gloss finish
  • Waterproof
  • Non-flammable
  • Marine & Exterior Quality
  • Freeze-thaw Stable
  • 12 Vibrant Colors: Natural, White, Black, Brown, Orange, Yellow, Green, Blue, Red, Pink, Silver-Grey-Grey, Bronze

    • Working Time Line Guide:
    1/2 hour: Sticky & most adhesive
    1 to 2 hours: Easy to work with
    2 to 3 hours: Setting up, form-able detail
    24 hours: Hard, cured & waterproof

    Tips:
  • Can be seamlessly feathered before set-up with a paint brush and the use of Aves®Safety Solvent for fine details; use water for smoothing large surface areas of your project.
  • Try rubbing a bit of extra virgin olive oil on your finger tips to keep the product from sticking.
  • Dipping your tools & fingers in cold water will keep Apoxie Sculpt from sticking to your surfaces and allow maximum details.
  • Create new colors of Apoxie Sculpt by mixing any of the part ‘A’ colors of Apoxie Sculpt together, then add an equal amount of part ‘B’ (all part A’s are the same, and all part B’s are the same)
  • Embellish with; tiles, glass, beads, stones, gems, crystals more!
  • Works excellent with gold leaf and mica powers!

    • Check out this color chart to learn how to mix Apoxie to make unlimited colors. Click here

    Price: $8.00
    Apoxie® Sculpt Two-part Modeling Compound - Black Apoxie® Sculpt Two-part Modeling Compound - Black - 1/10 LB

    Apoxie® Sculpt Two-part Modeling Compound

    Features:

  • Self-Hardening
  • Putty-like consistency
  • 1-3 hour working time
  • Highly Adhesive
  • Superior Detail
  • 0% Shrinkage & Cracking
  • Hard & Durable
  • Semi-gloss finish
  • Waterproof
  • Non-flammable
  • Marine & Exterior Quality
  • Freeze-thaw Stable
  • 12 Vibrant Colors: Natural, White, Black, Brown, Orange, Yellow, Green, Blue, Red, Pink, Silver-Grey-Grey, Bronze

    • Working Time Line Guide:
    1/2 hour: Sticky & most adhesive
    1 to 2 hours: Easy to work with
    2 to 3 hours: Setting up, form-able detail
    24 hours: Hard, cured & waterproof

    Tips:
  • Can be seamlessly feathered before set-up with a paint brush and the use of Aves®Safety Solvent for fine details; use water for smoothing large surface areas of your project.
  • Try rubbing a bit of extra virgin olive oil on your finger tips to keep the product from sticking.
  • Dipping your tools & fingers in cold water will keep Apoxie Sculpt from sticking to your surfaces and allow maximum details.
  • Create new colors of Apoxie Sculpt by mixing any of the part ‘A’ colors of Apoxie Sculpt together, then add an equal amount of part ‘B’ (all part A’s are the same, and all part B’s are the same)
  • Embellish with; tiles, glass, beads, stones, gems, crystals more!
  • Works excellent with gold leaf and mica powers!

    • Check out this color chart to learn how to mix Apoxie to make unlimited colors. Click here

    Price: $8.00
    Apoxie® Sculpt Two-part Modeling Compound - Brown Apoxie® Sculpt Two-part Modeling Compound - Brown - 1/10 LB

    Apoxie® Sculpt Two-part Modeling Compound

    Features:

  • Self-Hardening
  • Putty-like consistency
  • 1-3 hour working time
  • Highly Adhesive
  • Superior Detail
  • 0% Shrinkage & Cracking
  • Hard & Durable
  • Semi-gloss finish
  • Waterproof
  • Non-flammable
  • Marine & Exterior Quality
  • Freeze-thaw Stable
  • 12 Vibrant Colors: Natural, White, Black, Brown, Orange, Yellow, Green, Blue, Red, Pink, Silver-Grey-Grey, Bronze

    • Working Time Line Guide:
    1/2 hour: Sticky & most adhesive
    1 to 2 hours: Easy to work with
    2 to 3 hours: Setting up, form-able detail
    24 hours: Hard, cured & waterproof

    Tips:
  • Can be seamlessly feathered before set-up with a paint brush and the use of Aves®Safety Solvent for fine details; use water for smoothing large surface areas of your project.
  • Try rubbing a bit of extra virgin olive oil on your finger tips to keep the product from sticking.
  • Dipping your tools & fingers in cold water will keep Apoxie Sculpt from sticking to your surfaces and allow maximum details.
  • Create new colors of Apoxie Sculpt by mixing any of the part ‘A’ colors of Apoxie Sculpt together, then add an equal amount of part ‘B’ (all part A’s are the same, and all part B’s are the same)
  • Embellish with; tiles, glass, beads, stones, gems, crystals more!
  • Works excellent with gold leaf and mica powers!

    • Check out this color chart to learn how to mix Apoxie to make unlimited colors. Click here

    Price: $8.00
    Apoxie® Sculpt Two-part Modeling Compound - Pink Apoxie® Sculpt Two-part Modeling Compound - Pink - 1/10 LB

    Apoxie® Sculpt Two-part Modeling Compound

    Features:

  • Self-Hardening
  • Putty-like consistency
  • 1-3 hour working time
  • Highly Adhesive
  • Superior Detail
  • 0% Shrinkage & Cracking
  • Hard & Durable
  • Semi-gloss finish
  • Waterproof
  • Non-flammable
  • Marine & Exterior Quality
  • Freeze-thaw Stable
  • 12 Vibrant Colors: Natural, White, Black, Brown, Orange, Yellow, Green, Blue, Red, Pink, Silver-Grey-Grey, Bronze

    • Working Time Line Guide:
    1/2 hour: Sticky & most adhesive
    1 to 2 hours: Easy to work with
    2 to 3 hours: Setting up, form-able detail
    24 hours: Hard, cured & waterproof

    Tips:
  • Can be seamlessly feathered before set-up with a paint brush and the use of Aves®Safety Solvent for fine details; use water for smoothing large surface areas of your project.
  • Try rubbing a bit of extra virgin olive oil on your finger tips to keep the product from sticking.
  • Dipping your tools & fingers in cold water will keep Apoxie Sculpt from sticking to your surfaces and allow maximum details.
  • Create new colors of Apoxie Sculpt by mixing any of the part ‘A’ colors of Apoxie Sculpt together, then add an equal amount of part ‘B’ (all part A’s are the same, and all part B’s are the same)
  • Embellish with; tiles, glass, beads, stones, gems, crystals more!
  • Works excellent with gold leaf and mica powers!

    • Check out this color chart to learn how to mix Apoxie to make unlimited colors. Click here

    Price: $8.00
    Apoxie® Sculpt Two-part Modeling Compound - Bronze Apoxie® Sculpt Two-part Modeling Compound - Bronze - 1/10 LB

    Apoxie® Sculpt Two-part Modeling Compound

    Features:

  • Self-Hardening
  • Putty-like consistency
  • 1-3 hour working time
  • Highly Adhesive
  • Superior Detail
  • 0% Shrinkage & Cracking
  • Hard & Durable
  • Semi-gloss finish
  • Waterproof
  • Non-flammable
  • Marine & Exterior Quality
  • Freeze-thaw Stable
  • 12 Vibrant Colors: Natural, White, Black, Brown, Orange, Yellow, Green, Blue, Red, Pink, Silver-Grey-Grey, Bronze

    • Working Time Line Guide:
    1/2 hour: Sticky & most adhesive
    1 to 2 hours: Easy to work with
    2 to 3 hours: Setting up, form-able detail
    24 hours: Hard, cured & waterproof

    Tips:
  • Can be seamlessly feathered before set-up with a paint brush and the use of Aves®Safety Solvent for fine details; use water for smoothing large surface areas of your project.
  • Try rubbing a bit of extra virgin olive oil on your finger tips to keep the product from sticking.
  • Dipping your tools & fingers in cold water will keep Apoxie Sculpt from sticking to your surfaces and allow maximum details.
  • Create new colors of Apoxie Sculpt by mixing any of the part ‘A’ colors of Apoxie Sculpt together, then add an equal amount of part ‘B’ (all part A’s are the same, and all part B’s are the same)
  • Embellish with; tiles, glass, beads, stones, gems, crystals more!
  • Works excellent with gold leaf and mica powers!

    • Check out this color chart to learn how to mix Apoxie to make unlimited colors. Click here

    Price: $8.00
    Apoxie® Sculpt Two-part Modeling Compound - Silver-Grey Apoxie® Sculpt Two-part Modeling Compound - Silver-Grey - 1/10 LB

    Apoxie® Sculpt Two-part Modeling Compound

    Features:

  • Self-Hardening
  • Putty-like consistency
  • 1-3 hour working time
  • Highly Adhesive
  • Superior Detail
  • 0% Shrinkage & Cracking
  • Hard & Durable
  • Semi-gloss finish
  • Waterproof
  • Non-flammable
  • Marine & Exterior Quality
  • Freeze-thaw Stable
  • 12 Vibrant Colors: Natural, White, Black, Brown, Orange, Yellow, Green, Blue, Red, Pink, Silver-Grey-Grey, Bronze

    • Working Time Line Guide:
    1/2 hour: Sticky & most adhesive
    1 to 2 hours: Easy to work with
    2 to 3 hours: Setting up, form-able detail
    24 hours: Hard, cured & waterproof

    Tips:
  • Can be seamlessly feathered before set-up with a paint brush and the use of Aves®Safety Solvent for fine details; use water for smoothing large surface areas of your project.
  • Try rubbing a bit of extra virgin olive oil on your finger tips to keep the product from sticking.
  • Dipping your tools & fingers in cold water will keep Apoxie Sculpt from sticking to your surfaces and allow maximum details.
  • Create new colors of Apoxie Sculpt by mixing any of the part ‘A’ colors of Apoxie Sculpt together, then add an equal amount of part ‘B’ (all part A’s are the same, and all part B’s are the same)
  • Embellish with; tiles, glass, beads, stones, gems, crystals more!
  • Works excellent with gold leaf and mica powers!

    • Check out this color chart to learn how to mix Apoxie to make unlimited colors. Click here

    Price: $8.00
    Apoxie® Sculpt Two-part Modeling Compound - Natural Apoxie® Sculpt Two-part Modeling Compound - Natural - 1/10 LB

    Apoxie® Sculpt Two-part Modeling Compound

    Features:

  • Self-Hardening
  • Putty-like consistency
  • 1-3 hour working time
  • Highly Adhesive
  • Superior Detail
  • 0% Shrinkage & Cracking
  • Hard & Durable
  • Semi-gloss finish
  • Waterproof
  • Non-flammable
  • Marine & Exterior Quality
  • Freeze-thaw Stable
  • 12 Vibrant Colors: Natural, White, Black, Brown, Orange, Yellow, Green, Blue, Red, Pink, Silver-Grey-Grey, Bronze

    • Working Time Line Guide:
    1/2 hour: Sticky & most adhesive
    1 to 2 hours: Easy to work with
    2 to 3 hours: Setting up, form-able detail
    24 hours: Hard, cured & waterproof

    Tips:
  • Can be seamlessly feathered before set-up with a paint brush and the use of Aves®Safety Solvent for fine details; use water for smoothing large surface areas of your project.
  • Try rubbing a bit of extra virgin olive oil on your finger tips to keep the product from sticking.
  • Dipping your tools & fingers in cold water will keep Apoxie Sculpt from sticking to your surfaces and allow maximum details.
  • Create new colors of Apoxie Sculpt by mixing any of the part ‘A’ colors of Apoxie Sculpt together, then add an equal amount of part ‘B’ (all part A’s are the same, and all part B’s are the same)
  • Embellish with; tiles, glass, beads, stones, gems, crystals more!
  • Works excellent with gold leaf and mica powers!

    • Check out this color chart to learn how to mix Apoxie to make unlimited colors. Click here

    Price: $8.00
    Apoxie® Sculpt Two-part Modeling Compound - White Apoxie® Sculpt Two-part Modeling Compound - White - 1/10 LB

    Apoxie® Sculpt Two-part Modeling Compound

    Features:

  • Self-Hardening
  • Putty-like consistency
  • 1-3 hour working time
  • Highly Adhesive
  • Superior Detail
  • 0% Shrinkage & Cracking
  • Hard & Durable
  • Semi-gloss finish
  • Waterproof
  • Non-flammable
  • Marine & Exterior Quality
  • Freeze-thaw Stable
  • 12 Vibrant Colors: Natural, White, Black, Brown, Orange, Yellow, Green, Blue, Red, Pink, Silver-Grey-Grey, Bronze

    • Working Time Line Guide:
    1/2 hour: Sticky & most adhesive
    1 to 2 hours: Easy to work with
    2 to 3 hours: Setting up, form-able detail
    24 hours: Hard, cured & waterproof

    Tips:
  • Can be seamlessly feathered before set-up with a paint brush and the use of Aves®Safety Solvent for fine details; use water for smoothing large surface areas of your project.
  • Try rubbing a bit of extra virgin olive oil on your finger tips to keep the product from sticking.
  • Dipping your tools & fingers in cold water will keep Apoxie Sculpt from sticking to your surfaces and allow maximum details.
  • Create new colors of Apoxie Sculpt by mixing any of the part ‘A’ colors of Apoxie Sculpt together, then add an equal amount of part ‘B’ (all part A’s are the same, and all part B’s are the same)
  • Embellish with; tiles, glass, beads, stones, gems, crystals more!
  • Works excellent with gold leaf and mica powers!

    • Check out this color chart to learn how to mix Apoxie to make unlimited colors. Click here

    Price: $8.00
    Safety Solvent - 4 oz Safety Solvent - 4 oz

    Safety Solvent - 4 oz

    Features

  • Aves® Safety Solvent is safer than most all solvents available.
  • Conforms to ASTM D4236.
  • Great replacement for acetone & other commonly used toxic solvents.
  • Clear liquid. Low flammability, high flash point. Low odor and fumes.
  • Freeze-thaw Stable, Incredible shelf life!
  • DOT Certified for shipping by air, land or sea.
  • Does NOT contain alcohol, M.E.K.P, paint thinners or other harmful substances found in similar products.
  • Companion product for use with Aves® 2-part products and other epoxies.
  • Aves® Safety Solvent comes in a flip-top plastic squeeze bottle

    • Price: $8.00
    Preciosa Chaton - Black & White Mix Preciosa Chaton - Black & White Mix

    Preciosa Chaton - Black & White Mix

    Do not fire in metal clay. These are crystals and will melt in the kiln.

    Embed in epoxy clay, polymer clay, epoxy resins, or use in any type of prong, tube or bezel setting that will accommodate the stone.

    Price: $13.50
    New Price: $9.00
    Preciosa Chaton - Black Mix Preciosa Chaton - Black Mix

    Preciosa Chaton - Black Mix

    Do not fire in metal clay. These are crystals and will melt in the kiln.

    Embed in epoxy clay, polymer clay, epoxy resins, or use in any type of prong, tube or bezel setting that will accommodate the stone.

    Price: $13.50
    New Price: $9.00
    Preciosa Chaton - Brown Mix Preciosa Chaton - Brown Mix

    Preciosa Chaton - Brown Mix

    Do not fire in metal clay. These are crystals and will melt in the kiln.

    Embed in epoxy clay, polymer clay, epoxy resins, or use in any type of prong, tube or bezel setting that will accommodate the stone.

    Price: $13.50
    New Price: $9.00
    Preciosa Chaton - Lilac Mix Preciosa Chaton - Lilac Mix

    Preciosa Chaton - Lilac Mix

    Do not fire in metal clay. These are crystals and will melt in the kiln.

    Embed in epoxy clay, polymer clay, epoxy resins, or use in any type of prong, tube or bezel setting that will accommodate the stone.

    Price: $13.50
    New Price: $9.00
    Preciosa Chaton - Blue & Red Mix Preciosa Chaton - Blue & Red Mix

    Preciosa Chaton - Blue & Red Mix

    Do not fire in metal clay. These are crystals and will melt in the kiln.

    Embed in epoxy clay, polymer clay, epoxy resins, or use in any type of prong, tube or bezel setting that will accommodate the stone.

    Price: $13.50
    New Price: $9.00
    Preciosa Chaton - Green Mix Preciosa Chaton - Green Mix

    Preciosa Chaton - Green Mix

    Do not fire in metal clay. These are crystals and will melt in the kiln.

    Embed in epoxy clay, polymer clay, epoxy resins, or use in any type of prong, tube or bezel setting that will accommodate the stone.

    Price: $13.50
    New Price: $9.00
    Preciosa Chaton - Red Mix Preciosa Chaton - Red Mix

    Preciosa Chaton - Red Mix

    Do not fire in metal clay. These are crystals and will melt in the kiln.

    Embed in epoxy clay, polymer clay, epoxy resins, or use in any type of prong, tube or bezel setting that will accommodate the stone.

    Price: $13.50
    New Price: $9.00
    Preciosa Chaton - Pink Mix Preciosa Chaton - Pink Mix

    Preciosa Chaton - Pink Mix

    Do not fire in metal clay. These are crystals and will melt in the kiln.

    Embed in epoxy clay, polymer clay, epoxy resins, or use in any type of prong, tube or bezel setting that will accommodate the stone.

    Price: $13.50
    New Price: $9.00
    Preciosa Chaton - Crystal Mix Preciosa Chaton - Crystal Mix

    Preciosa Chaton - Crystal Mix

    Do not fire in metal clay. These are crystals and will melt in the kiln.

    Price: $13.50
    New Price: $9.90
    Apoxie® Sculpt Two-part Modeling Compound - Yellow Apoxie® Sculpt Two-part Modeling Compound - Yellow - 1/4 LB

    Apoxie® Sculpt Two-part Modeling Compound

    Features:

  • Self-Hardening
  • Putty-like consistency
  • 1-3 hour working time
  • Highly Adhesive
  • Superior Detail
  • 0% Shrinkage & Cracking
  • Hard & Durable
  • Semi-gloss finish
  • Waterproof
  • Non-flammable
  • Marine & Exterior Quality
  • Freeze-thaw Stable
  • 12 Vibrant Colors: Natural, White, Black, Brown, Orange, Yellow, Green, Blue, Red, Pink, Silver-Grey-Grey, Bronze

    • Working Time Line Guide:
    1/2 hour: Sticky & most adhesive
    1 to 2 hours: Easy to work with
    2 to 3 hours: Setting up, form-able detail
    24 hours: Hard, cured & waterproof

    Tips:
  • Can be seamlessly feathered before set-up with a paint brush and the use of Aves®Safety Solvent for fine details; use water for smoothing large surface areas of your project.
  • Try rubbing a bit of extra virgin olive oil on your finger tips to keep the product from sticking.
  • Dipping your tools & fingers in cold water will keep Apoxie Sculpt from sticking to your surfaces and allow maximum details.
  • Create new colors of Apoxie Sculpt by mixing any of the part ‘A’ colors of Apoxie Sculpt together, then add an equal amount of part ‘B’ (all part A’s are the same, and all part B’s are the same)
  • Embellish with; tiles, glass, beads, stones, gems, crystals more!
  • Works excellent with gold leaf and mica powers!

    • Check out this color chart to learn how to mix Apoxie to make unlimited colors. Click here

    Price: $10.00
    Apoxie® Sculpt Two-part Modeling Compound - Green Apoxie® Sculpt Two-part Modeling Compound - Green - 1/4 LB

    Apoxie® Sculpt Two-part Modeling Compound

    Features:

  • Self-Hardening
  • Putty-like consistency
  • 1-3 hour working time
  • Highly Adhesive
  • Superior Detail
  • 0% Shrinkage & Cracking
  • Hard & Durable
  • Semi-gloss finish
  • Waterproof
  • Non-flammable
  • Marine & Exterior Quality
  • Freeze-thaw Stable
  • 12 Vibrant Colors: Natural, White, Black, Brown, Orange, Yellow, Green, Blue, Red, Pink, Silver-Grey-Grey, Bronze

    • Working Time Line Guide:
    1/2 hour: Sticky & most adhesive
    1 to 2 hours: Easy to work with
    2 to 3 hours: Setting up, form-able detail
    24 hours: Hard, cured & waterproof

    Tips:
  • Can be seamlessly feathered before set-up with a paint brush and the use of Aves®Safety Solvent for fine details; use water for smoothing large surface areas of your project.
  • Try rubbing a bit of extra virgin olive oil on your finger tips to keep the product from sticking.
  • Dipping your tools & fingers in cold water will keep Apoxie Sculpt from sticking to your surfaces and allow maximum details.
  • Create new colors of Apoxie Sculpt by mixing any of the part ‘A’ colors of Apoxie Sculpt together, then add an equal amount of part ‘B’ (all part A’s are the same, and all part B’s are the same)
  • Embellish with; tiles, glass, beads, stones, gems, crystals more!
  • Works excellent with gold leaf and mica powers!

    • Check out this color chart to learn how to mix Apoxie to make unlimited colors. Click here

    Price: $10.00
    Apoxie® Sculpt Two-part Modeling Compound - Blue Apoxie® Sculpt Two-part Modeling Compound - Blue - 1/4 LB

    Apoxie® Sculpt Two-part Modeling Compound

    Features:

  • Self-Hardening
  • Putty-like consistency
  • 1-3 hour working time
  • Highly Adhesive
  • Superior Detail
  • 0% Shrinkage & Cracking
  • Hard & Durable
  • Semi-gloss finish
  • Waterproof
  • Non-flammable
  • Marine & Exterior Quality
  • Freeze-thaw Stable
  • 12 Vibrant Colors: Natural, White, Black, Brown, Orange, Yellow, Green, Blue, Red, Pink, Silver-Grey-Grey, Bronze

    • Working Time Line Guide:
    1/2 hour: Sticky & most adhesive
    1 to 2 hours: Easy to work with
    2 to 3 hours: Setting up, form-able detail
    24 hours: Hard, cured & waterproof

    Tips:
  • Can be seamlessly feathered before set-up with a paint brush and the use of Aves®Safety Solvent for fine details; use water for smoothing large surface areas of your project.
  • Try rubbing a bit of extra virgin olive oil on your finger tips to keep the product from sticking.
  • Dipping your tools & fingers in cold water will keep Apoxie Sculpt from sticking to your surfaces and allow maximum details.
  • Create new colors of Apoxie Sculpt by mixing any of the part ‘A’ colors of Apoxie Sculpt together, then add an equal amount of part ‘B’ (all part A’s are the same, and all part B’s are the same)
  • Embellish with; tiles, glass, beads, stones, gems, crystals more!
  • Works excellent with gold leaf and mica powers!

    • Check out this color chart to learn how to mix Apoxie to make unlimited colors. Click here

    Price: $10.00
    Apoxie® Sculpt Two-part Modeling Compound - Orange Apoxie® Sculpt Two-part Modeling Compound - Orange - 1/4 LB

    Apoxie® Sculpt Two-part Modeling Compound

    Features:

  • Self-Hardening
  • Putty-like consistency
  • 1-3 hour working time
  • Highly Adhesive
  • Superior Detail
  • 0% Shrinkage & Cracking
  • Hard & Durable
  • Semi-gloss finish
  • Waterproof
  • Non-flammable
  • Marine & Exterior Quality
  • Freeze-thaw Stable
  • 12 Vibrant Colors: Natural, White, Black, Brown, Orange, Yellow, Green, Blue, Red, Pink, Silver-Grey-Grey, Bronze

    • Working Time Line Guide:
    1/2 hour: Sticky & most adhesive
    1 to 2 hours: Easy to work with
    2 to 3 hours: Setting up, form-able detail
    24 hours: Hard, cured & waterproof

    Tips:
  • Can be seamlessly feathered before set-up with a paint brush and the use of Aves®Safety Solvent for fine details; use water for smoothing large surface areas of your project.
  • Try rubbing a bit of extra virgin olive oil on your finger tips to keep the product from sticking.
  • Dipping your tools & fingers in cold water will keep Apoxie Sculpt from sticking to your surfaces and allow maximum details.
  • Create new colors of Apoxie Sculpt by mixing any of the part ‘A’ colors of Apoxie Sculpt together, then add an equal amount of part ‘B’ (all part A’s are the same, and all part B’s are the same)
  • Embellish with; tiles, glass, beads, stones, gems, crystals more!
  • Works excellent with gold leaf and mica powers!

    • Check out this color chart to learn how to mix Apoxie to make unlimited colors. Click here

    Price: $10.00
    Apoxie® Sculpt Two-part Modeling Compound - Red Apoxie® Sculpt Two-part Modeling Compound - Red - 1/4 LB

    Apoxie® Sculpt Two-part Modeling Compound

    Features:

  • Self-Hardening
  • Putty-like consistency
  • 1-3 hour working time
  • Highly Adhesive
  • Superior Detail
  • 0% Shrinkage & Cracking
  • Hard & Durable
  • Semi-gloss finish
  • Waterproof
  • Non-flammable
  • Marine & Exterior Quality
  • Freeze-thaw Stable
  • 12 Vibrant Colors: Natural, White, Black, Brown, Orange, Yellow, Green, Blue, Red, Pink, Silver-Grey-Grey, Bronze

    • Working Time Line Guide:
    1/2 hour: Sticky & most adhesive
    1 to 2 hours: Easy to work with
    2 to 3 hours: Setting up, form-able detail
    24 hours: Hard, cured & waterproof

    Tips:
  • Can be seamlessly feathered before set-up with a paint brush and the use of Aves®Safety Solvent for fine details; use water for smoothing large surface areas of your project.
  • Try rubbing a bit of extra virgin olive oil on your finger tips to keep the product from sticking.
  • Dipping your tools & fingers in cold water will keep Apoxie Sculpt from sticking to your surfaces and allow maximum details.
  • Create new colors of Apoxie Sculpt by mixing any of the part ‘A’ colors of Apoxie Sculpt together, then add an equal amount of part ‘B’ (all part A’s are the same, and all part B’s are the same)
  • Embellish with; tiles, glass, beads, stones, gems, crystals more!
  • Works excellent with gold leaf and mica powers!

    • Check out this color chart to learn how to mix Apoxie to make unlimited colors. Click here

    Price: $10.00
    Apoxie® Sculpt Two-part Modeling Compound - Black Apoxie® Sculpt Two-part Modeling Compound - Black - 1/4 LB

    Apoxie® Sculpt Two-part Modeling Compound

    Features:

  • Self-Hardening
  • Putty-like consistency
  • 1-3 hour working time
  • Highly Adhesive
  • Superior Detail
  • 0% Shrinkage & Cracking
  • Hard & Durable
  • Semi-gloss finish
  • Waterproof
  • Non-flammable
  • Marine & Exterior Quality
  • Freeze-thaw Stable
  • 12 Vibrant Colors: Natural, White, Black, Brown, Orange, Yellow, Green, Blue, Red, Pink, Silver-Grey-Grey, Bronze

    • Working Time Line Guide:
    1/2 hour: Sticky & most adhesive
    1 to 2 hours: Easy to work with
    2 to 3 hours: Setting up, form-able detail
    24 hours: Hard, cured & waterproof

    Tips:
  • Can be seamlessly feathered before set-up with a paint brush and the use of Aves®Safety Solvent for fine details; use water for smoothing large surface areas of your project.
  • Try rubbing a bit of extra virgin olive oil on your finger tips to keep the product from sticking.
  • Dipping your tools & fingers in cold water will keep Apoxie Sculpt from sticking to your surfaces and allow maximum details.
  • Create new colors of Apoxie Sculpt by mixing any of the part ‘A’ colors of Apoxie Sculpt together, then add an equal amount of part ‘B’ (all part A’s are the same, and all part B’s are the same)
  • Embellish with; tiles, glass, beads, stones, gems, crystals more!
  • Works excellent with gold leaf and mica powers!

    • Check out this color chart to learn how to mix Apoxie to make unlimited colors. Click here

    Price: $10.00
    Apoxie® Sculpt Two-part Modeling Compound - Brown Apoxie® Sculpt Two-part Modeling Compound - Brown - 1/4 LB

    Apoxie® Sculpt Two-part Modeling Compound

    Features:

  • Self-Hardening
  • Putty-like consistency
  • 1-3 hour working time
  • Highly Adhesive
  • Superior Detail
  • 0% Shrinkage & Cracking
  • Hard & Durable
  • Semi-gloss finish
  • Waterproof
  • Non-flammable
  • Marine & Exterior Quality
  • Freeze-thaw Stable
  • 12 Vibrant Colors: Natural, White, Black, Brown, Orange, Yellow, Green, Blue, Red, Pink, Silver-Grey-Grey, Bronze

    • Working Time Line Guide:
    1/2 hour: Sticky & most adhesive
    1 to 2 hours: Easy to work with
    2 to 3 hours: Setting up, form-able detail
    24 hours: Hard, cured & waterproof

    Tips:
  • Can be seamlessly feathered before set-up with a paint brush and the use of Aves®Safety Solvent for fine details; use water for smoothing large surface areas of your project.
  • Try rubbing a bit of extra virgin olive oil on your finger tips to keep the product from sticking.
  • Dipping your tools & fingers in cold water will keep Apoxie Sculpt from sticking to your surfaces and allow maximum details.
  • Create new colors of Apoxie Sculpt by mixing any of the part ‘A’ colors of Apoxie Sculpt together, then add an equal amount of part ‘B’ (all part A’s are the same, and all part B’s are the same)
  • Embellish with; tiles, glass, beads, stones, gems, crystals more!
  • Works excellent with gold leaf and mica powers!

    • Check out this color chart to learn how to mix Apoxie to make unlimited colors. Click here

    Price: $10.00
    Apoxie® Sculpt Two-part Modeling Compound - Pink Apoxie® Sculpt Two-part Modeling Compound - Pink - 1/4 LB

    Apoxie® Sculpt Two-part Modeling Compound

    Features:

  • Self-Hardening
  • Putty-like consistency
  • 1-3 hour working time
  • Highly Adhesive
  • Superior Detail
  • 0% Shrinkage & Cracking
  • Hard & Durable
  • Semi-gloss finish
  • Waterproof
  • Non-flammable
  • Marine & Exterior Quality
  • Freeze-thaw Stable
  • 12 Vibrant Colors: Natural, White, Black, Brown, Orange, Yellow, Green, Blue, Red, Pink, Silver-Grey-Grey, Bronze

    • Working Time Line Guide:
    1/2 hour: Sticky & most adhesive
    1 to 2 hours: Easy to work with
    2 to 3 hours: Setting up, form-able detail
    24 hours: Hard, cured & waterproof

    Tips:
  • Can be seamlessly feathered before set-up with a paint brush and the use of Aves®Safety Solvent for fine details; use water for smoothing large surface areas of your project.
  • Try rubbing a bit of extra virgin olive oil on your finger tips to keep the product from sticking.
  • Dipping your tools & fingers in cold water will keep Apoxie Sculpt from sticking to your surfaces and allow maximum details.
  • Create new colors of Apoxie Sculpt by mixing any of the part ‘A’ colors of Apoxie Sculpt together, then add an equal amount of part ‘B’ (all part A’s are the same, and all part B’s are the same)
  • Embellish with; tiles, glass, beads, stones, gems, crystals more!
  • Works excellent with gold leaf and mica powers!

    • Check out this color chart to learn how to mix Apoxie to make unlimited colors. Click here

    Price: $10.00
    Apoxie® Sculpt Two-part Modeling Compound - Bronze Apoxie® Sculpt Two-part Modeling Compound - Bronze - 1/4 LB

    Apoxie® Sculpt Two-part Modeling Compound

    Features:

  • Self-Hardening
  • Putty-like consistency
  • 1-3 hour working time
  • Highly Adhesive
  • Superior Detail
  • 0% Shrinkage & Cracking
  • Hard & Durable
  • Semi-gloss finish
  • Waterproof
  • Non-flammable
  • Marine & Exterior Quality
  • Freeze-thaw Stable
  • 12 Vibrant Colors: Natural, White, Black, Brown, Orange, Yellow, Green, Blue, Red, Pink, Silver-Grey-Grey, Bronze

    • Working Time Line Guide:
    1/2 hour: Sticky & most adhesive
    1 to 2 hours: Easy to work with
    2 to 3 hours: Setting up, form-able detail
    24 hours: Hard, cured & waterproof

    Tips:
  • Can be seamlessly feathered before set-up with a paint brush and the use of Aves®Safety Solvent for fine details; use water for smoothing large surface areas of your project.
  • Try rubbing a bit of extra virgin olive oil on your finger tips to keep the product from sticking.
  • Dipping your tools & fingers in cold water will keep Apoxie Sculpt from sticking to your surfaces and allow maximum details.
  • Create new colors of Apoxie Sculpt by mixing any of the part ‘A’ colors of Apoxie Sculpt together, then add an equal amount of part ‘B’ (all part A’s are the same, and all part B’s are the same)
  • Embellish with; tiles, glass, beads, stones, gems, crystals more!
  • Works excellent with gold leaf and mica powers!

    • Check out this color chart to learn how to mix Apoxie to make unlimited colors. Click here

    Price: $10.00
    Apoxie® Sculpt Two-part Modeling Compound - Silver-Grey Apoxie® Sculpt Two-part Modeling Compound - Silver-Grey - 1/4 LB

    Apoxie® Sculpt Two-part Modeling Compound

    Features:

  • Self-Hardening
  • Putty-like consistency
  • 1-3 hour working time
  • Highly Adhesive
  • Superior Detail
  • 0% Shrinkage & Cracking
  • Hard & Durable
  • Semi-gloss finish
  • Waterproof
  • Non-flammable
  • Marine & Exterior Quality
  • Freeze-thaw Stable
  • 12 Vibrant Colors: Natural, White, Black, Brown, Orange, Yellow, Green, Blue, Red, Pink, Silver-Grey-Grey, Bronze

    • Working Time Line Guide:
    1/2 hour: Sticky & most adhesive
    1 to 2 hours: Easy to work with
    2 to 3 hours: Setting up, form-able detail
    24 hours: Hard, cured & waterproof

    Tips:
  • Can be seamlessly feathered before set-up with a paint brush and the use of Aves®Safety Solvent for fine details; use water for smoothing large surface areas of your project.
  • Try rubbing a bit of extra virgin olive oil on your finger tips to keep the product from sticking.
  • Dipping your tools & fingers in cold water will keep Apoxie Sculpt from sticking to your surfaces and allow maximum details.
  • Create new colors of Apoxie Sculpt by mixing any of the part ‘A’ colors of Apoxie Sculpt together, then add an equal amount of part ‘B’ (all part A’s are the same, and all part B’s are the same)
  • Embellish with; tiles, glass, beads, stones, gems, crystals more!
  • Works excellent with gold leaf and mica powers!

    • Check out this color chart to learn how to mix Apoxie to make unlimited colors. Click here

    Price: $10.00
    Apoxie® Sculpt Two-part Modeling Compound - Natural Apoxie® Sculpt Two-part Modeling Compound - Natural - 1/4 LB

    Apoxie® Sculpt Two-part Modeling Compound

    Features:

  • Self-Hardening
  • Putty-like consistency
  • 1-3 hour working time
  • Highly Adhesive
  • Superior Detail
  • 0% Shrinkage & Cracking
  • Hard & Durable
  • Semi-gloss finish
  • Waterproof
  • Non-flammable
  • Marine & Exterior Quality
  • Freeze-thaw Stable
  • 12 Vibrant Colors: Natural, White, Black, Brown, Orange, Yellow, Green, Blue, Red, Pink, Silver-Grey-Grey, Bronze

    • Working Time Line Guide:
    1/2 hour: Sticky & most adhesive
    1 to 2 hours: Easy to work with
    2 to 3 hours: Setting up, form-able detail
    24 hours: Hard, cured & waterproof

    Tips:
  • Can be seamlessly feathered before set-up with a paint brush and the use of Aves®Safety Solvent for fine details; use water for smoothing large surface areas of your project.
  • Try rubbing a bit of extra virgin olive oil on your finger tips to keep the product from sticking.
  • Dipping your tools & fingers in cold water will keep Apoxie Sculpt from sticking to your surfaces and allow maximum details.
  • Create new colors of Apoxie Sculpt by mixing any of the part ‘A’ colors of Apoxie Sculpt together, then add an equal amount of part ‘B’ (all part A’s are the same, and all part B’s are the same)
  • Embellish with; tiles, glass, beads, stones, gems, crystals more!
  • Works excellent with gold leaf and mica powers!

    • Check out this color chart to learn how to mix Apoxie to make unlimited colors. Click here

    Price: $10.00
    Apoxie® Sculpt Two-part Modeling Compound - White Apoxie® Sculpt Two-part Modeling Compound - White - 1/4 LB

    Apoxie® Sculpt Two-part Modeling Compound

    Features:

  • Self-Hardening
  • Putty-like consistency
  • 1-3 hour working time
  • Highly Adhesive
  • Superior Detail
  • 0% Shrinkage & Cracking
  • Hard & Durable
  • Semi-gloss finish
  • Waterproof
  • Non-flammable
  • Marine & Exterior Quality
  • Freeze-thaw Stable
  • 12 Vibrant Colors: Natural, White, Black, Brown, Orange, Yellow, Green, Blue, Red, Pink, Silver-Grey-Grey, Bronze

    • Working Time Line Guide:
    1/2 hour: Sticky & most adhesive
    1 to 2 hours: Easy to work with
    2 to 3 hours: Setting up, form-able detail
    24 hours: Hard, cured & waterproof

    Tips:
  • Can be seamlessly feathered before set-up with a paint brush and the use of Aves®Safety Solvent for fine details; use water for smoothing large surface areas of your project.
  • Try rubbing a bit of extra virgin olive oil on your finger tips to keep the product from sticking.
  • Dipping your tools & fingers in cold water will keep Apoxie Sculpt from sticking to your surfaces and allow maximum details.
  • Create new colors of Apoxie Sculpt by mixing any of the part ‘A’ colors of Apoxie Sculpt together, then add an equal amount of part ‘B’ (all part A’s are the same, and all part B’s are the same)
  • Embellish with; tiles, glass, beads, stones, gems, crystals more!
  • Works excellent with gold leaf and mica powers!

    • Check out this color chart to learn how to mix Apoxie to make unlimited colors. Click here

    Price: $10.00
    Magic-Glos 1 oz Magic-Glos™ UV Resin by Lisa Pavelka - 1 oz

    Magic-Glos UV Resin by Lisa Pavelka

    Magic-Glos is a must have to help gloss, seal and protect your polymer clay masterpiece and craft creations. Just pour and cure. The easiest method of curing is to set the item in direct sunlight for 10 minutes. If you want to add additional height to your pieces, pour an additional layer and allow it to cure the same as the first layer. A UV light can also be used to cure the resin. No shrinkage and waterproof!

    Non-toxic, dimensional, water based resin. Dries crystal clear.

    Price: $10.75
    Super White Apoxie® Two-part Modeling Compound - 1/4 LB Super White Apoxie® Two-part Modeling Compound - 1/4 LB

    Super White Apoxie Two-part Modeling Compound - 1/4 LB

    Features:

  • Premium Quality
  • Easy to Use
  • 1 hour working time
  • Enhanced Detailing
  • Smooth Semi-gloss Finish
  • Firm Feel for modeling & tooling
  • Snappy Set-Up
  • Strong & Permanent
  • Self-Hardening
  • 0% Shrinkage & Cracking
  • Waterproof
  • Super White Body
  • Freeze-thaw stable
  • Exterior Quality
  • Sulfur Free

    • Working Time Line Guide:
    Mix A+B: Most adhesive, easy to embellish & shape
    20 minutes: Form-able for detail
    1 hour: Setting up
    24 hours: Hard, cured & waterproof

    Tips:
  • Can be seamlessly feathered before set-up with a paint brush and the use of Aves®Safety Solvent for fine details; use water for smoothing large surface areas of your project.
  • Try rubbing a bit of extra virgin olive oil on your finger tips to keep the product from sticking.
  • Dipping your tools & fingers in cold water will keep Apoxie Sculpt from sticking to your surfaces and allow maximum details.
  • Create new colors of Apoxie Sculpt by mixing any of the part ‘A’ colors of Apoxie Sculpt together, then add an equal amount of part ‘B’ (all part A’s are the same, and all part B’s are the same)
  • Embellish with; tiles, glass, beads, stones, gems, crystals more!
  • Works excellent with gold leaf and mica powers!

    • Check out this color chart to learn how to mix Apoxie to make unlimited colors. Click here

    Price: $12.00
    Swarovski Chaton - Black Mix Swarovski Chaton - Black Mix

    Swarovski Chaton - Black Mix

    Do not fire in metal clay. These are crystals and will melt in the kiln.

    This mix comes with various shapes, sizes and colors of Preciosa to embellish your jewelry designs. Embed in epoxy clay, polymer clay, epoxy resins, or use in any type of prong, tube or bezel setting that will accommodate the stone.

    Price: $17.50
    Apoxie® Sculpt Two-part Modeling Compound Color Kit - Neutral Apoxie® Sculpt Two-part Modeling Compound Color Kit - Neutral

    Apoxie® Sculpt Two-part Modeling Compound Color Kit

    Features:

  • Self-Hardening
  • Putty-like consistency
  • 1-3 hour working time
  • Highly Adhesive
  • Superior Detail
  • 0% Shrinkage & Cracking
  • Hard & Durable
  • Semi-gloss finish
  • Waterproof
  • Non-flammable
  • Marine & Exterior Quality
  • Freeze-thaw Stable

    • Working Time Line Guide:
    1/2 hour: Sticky & most adhesive
    1 to 2 hours: Easy to work with
    2 to 3 hours: Setting up, form-able detail
    24 hours: Hard, cured & waterproof

    Tips:
  • Can be seamlessly feathered before set-up with a paint brush and the use of Aves®Safety Solvent for fine details; use water for smoothing large surface areas of your project.
  • Try rubbing a bit of extra virgin olive oil on your finger tips to keep the product from sticking.
  • Dipping your tools & fingers in cold water will keep Apoxie Sculpt from sticking to your surfaces and allow maximum details.
  • Create new colors of Apoxie Sculpt by mixing any of the part ‘A’ colors of Apoxie Sculpt together, then add an equal amount of part ‘B’ (all part A’s are the same, and all part B’s are the same)
  • Embellish with; tiles, glass, beads, stones, gems, crystals more!
  • Works excellent with gold leaf and mica powers!

    • Check out this color chart to learn how to mix Apoxie to make unlimited colors. Click here

    Price: $20.00
    Apoxie® Sculpt Two-part Modeling Compound Color Kit - Primary Apoxie® Sculpt Two-part Modeling Compound Color Kit - Primary

    Apoxie® Sculpt Two-part Modeling Compound Color Kit

    Features:

  • Self-Hardening
  • Putty-like consistency
  • 1-3 hour working time
  • Highly Adhesive
  • Superior Detail
  • 0% Shrinkage & Cracking
  • Hard & Durable
  • Semi-gloss finish
  • Waterproof
  • Non-flammable
  • Marine & Exterior Quality
  • Freeze-thaw Stable

    • Working Time Line Guide:
    1/2 hour: Sticky & most adhesive
    1 to 2 hours: Easy to work with
    2 to 3 hours: Setting up, form-able detail
    24 hours: Hard, cured & waterproof

    Tips:
  • Can be seamlessly feathered before set-up with a paint brush and the use of Aves®Safety Solvent for fine details; use water for smoothing large surface areas of your project.
  • Try rubbing a bit of extra virgin olive oil on your finger tips to keep the product from sticking.
  • Dipping your tools & fingers in cold water will keep Apoxie Sculpt from sticking to your surfaces and allow maximum details.
  • Create new colors of Apoxie Sculpt by mixing any of the part ‘A’ colors of Apoxie Sculpt together, then add an equal amount of part ‘B’ (all part A’s are the same, and all part B’s are the same)
  • Embellish with; tiles, glass, beads, stones, gems, crystals more!
  • Works excellent with gold leaf and mica powers!

    • Check out this color chart to learn how to mix Apoxie to make unlimited colors. Click here

    Price: $20.00
    Apoxie® Sculpt Two-part Modeling Compound Color Kit - Earth Apoxie® Sculpt Two-part Modeling Compound Color Kit - Earth

    Apoxie® Sculpt Two-part Modeling Compound Color Kit

    Features:

  • Self-Hardening
  • Putty-like consistency
  • 1-3 hour working time
  • Highly Adhesive
  • Superior Detail
  • 0% Shrinkage & Cracking
  • Hard & Durable
  • Semi-gloss finish
  • Waterproof
  • Non-flammable
  • Marine & Exterior Quality
  • Freeze-thaw Stable

    • Working Time Line Guide:
    1/2 hour: Sticky & most adhesive
    1 to 2 hours: Easy to work with
    2 to 3 hours: Setting up, form-able detail
    24 hours: Hard, cured & waterproof

    Tips:
  • Can be seamlessly feathered before set-up with a paint brush and the use of Aves®Safety Solvent for fine details; use water for smoothing large surface areas of your project.
  • Try rubbing a bit of extra virgin olive oil on your finger tips to keep the product from sticking.
  • Dipping your tools & fingers in cold water will keep Apoxie Sculpt from sticking to your surfaces and allow maximum details.
  • Create new colors of Apoxie Sculpt by mixing any of the part ‘A’ colors of Apoxie Sculpt together, then add an equal amount of part ‘B’ (all part A’s are the same, and all part B’s are the same)
  • Embellish with; tiles, glass, beads, stones, gems, crystals more!
  • Works excellent with gold leaf and mica powers!

    • Check out this color chart to learn how to mix Apoxie to make unlimited colors. Click here

    Price: $20.00