Art Clay™ Silver 950 Clay
Art Clay Silver 950 Clay
Art Clay silver 950 comes in a pre-mixed clay form, ready to use. This product is 90% Silver and Copper alloy and 10% binder and water.
The surface hardness and bending strength of ACS 950 is approximately 60% sgtronger than regular Art Clay Silver. The finished silver surface is more resistant to scratches which is more suitable for rings and cuffs.
Art Clay™ Silver Clay Syringe
Art Clay Silver Clay Syringe
Apply fine details, fill cracks, close seams, add piping and to attach findings to wet or dry clay.
.999 Aussie Silver Clay
.999 Aussie Silver Clay
Firing Properties
For kiln firing only
Can be fired in both the brick and the muffle kilns
Works with either a single or a 2 stage firing schedule
Base metals fire in activated Coconut Carbon
Fire multiple colors at the same temperature
Clay Types
Clay options: Standard and Super Flex
Clay type: Silver
Firing Schedule
Shrinkage: Between 10 & 12%
.999 Aussie Silver Clay Super Flex
.999 Aussie Silver Clay Super Flex
Firing Properties
For kiln firing only
Can be fired in both the brick and the muffle kilns
Works with either a single or a 2 stage firing schedule
Base metals fire in activated Coconut Carbon
Fire multiple colors at the same temperature
Clay Types
Clay options: Standard and Super Flex
Clay type: Silver
Firing Schedule
Fire as a part of a 2 fire schedule. Fire in a kiln. Fire in activated coconut carbon. Please remember this firing schedule is based on a cold kiln and thickness of the piece is also something you need to work out. If a piece is any thicker than about 6mm thick you may need extra time due to the thickness of the piece.
Rehydrating Aussie Metal Clay Make sure you use DISTILLED WATER as it hydrates the clay better than ordinary water. Keep any moist clay in a sealed container so it doesn’t dry out.
Normal Open shelf firing for Aussie .999 Silver & Aussie .960 Silver
1 fire – place your pieces on an open kiln shelf in your kiln, You may like to sit them on a kiln paper or a firing blanket, but not necessary.
From a cold kiln ramp to 1000 degrees Celsius & hold at 800 – 815 degrees Celsius (depending on your kiln heat).
Hold time of 1 to 1.5 hours & let cool.
Remove your pieces from the kiln once cool and your pieces are ready to brass brush, tumble & polish.
Firing with CZs
1st Fire Settings:
Set pieces on a bed of activated coconut carbon at a depth of approx. 10-12mm under pieces. If you would like you can also lay your pieces on a kiln paper or a fire blanket.
Ramp at 1000 degrees Celsius to 400 degrees Celsius.
Hold for 30 to 60 minutes for complete burnout of organic binder.
Let cool, we don’t quench in water.
2nd Fire:
Once cool, you cover your pieces with activated coconut carbon so that each piece is covered by about 12mm and fire for the second time. Ramping to 1000 degrees Celsius & hold at 800 – 815 degrees Celsius (depending on your kiln heat). Hold time of 1 to 1.5 hours & let cool. Remove your pieces from the activated coconut once cool and your pieces are ready to brass brush, tumble & polish.
Shrinkage: Between 12 & 15%
.999 Aussie Silver Clay - Lump Form
.999 Aussie Silver Clay - Lump Form
Firing Properties
For kiln firing only
Can be fired in both the brick and the muffle kilns
Works with either a single or a 2 stage firing schedule
Base metals fire in activated Coconut Carbon
Fire multiple colors at the same temperature
Clay Types
Clay comes in Super Flex only
Clay type: Silver
Firing Schedule
Fire as a part of a 2 fire schedule. Fire in a kiln. Fire in activated coconut carbon. Please remember this firing schedule is based on a cold kiln and thickness of the piece is also something you need to work out. If a piece is any thicker than about 6mm thick you may need extra time due to the thickness of the piece.
Rehydrating Aussie Metal Clay Make sure you use DISTILLED WATER as it hydrates the clay better than ordinary water. Keep any moist clay in a sealed container so it doesn’t dry out.
Normal Open shelf firing for Aussie .999 Silver & Aussie .960 Silver
1 fire – place your pieces on an open kiln shelf in your kiln, You may like to sit them on a kiln paper or a firing blanket, but not necessary.
From a cold kiln ramp to 1000 degrees Celsius & hold at 800 – 815 degrees Celsius (depending on your kiln heat).
Hold time of 1 to 1.5 hours & let cool.
Remove your pieces from the kiln once cool and your pieces are ready to brass brush, tumble & polish.
Firing with CZs
1st Fire Settings:
Set pieces on a bed of activated coconut carbon at a depth of approx. 10-12mm under pieces. If you would like you can also lay your pieces on a kiln paper or a fire blanket.
Ramp at 1000 degrees Celsius to 400 degrees Celsius.
Hold for 30 to 60 minutes for complete burnout of organic binder.
Let cool, we don’t quench in water.
2nd Fire:
Once cool, you cover your pieces with activated coconut carbon so that each piece is covered by about 12mm and fire for the second time. Ramping to 1000 degrees Celsius & hold at 800 – 815 degrees Celsius (depending on your kiln heat). Hold time of 1 to 1.5 hours & let cool. Remove your pieces from the activated coconut once cool and your pieces are ready to brass brush, tumble & polish.
Shrinkage: Between 10 & 12%
PMC One-Fire Sterling - Silver Metal Clay
PMC One-Fire Sterling
PMC Sterling is sterling silver in clay form.
This OneFire Sterling PMC™ is ideal for more delicate designs and for pieces that just have to have the added strength. In addition, you can solder on your fired pieces with any grade of silver solder, and they are suitable for enameling, keum-boo, stone-setting, and even plating, if desired. Check out our
Gemstone Firing Guide for details on firing a specific stone.
Shrinkage - 15-20%
Set stones using traditional setting tools and techniques, solder, drill, rivet and form, sand, file, etc.
Sculpey III Polymer Clay - Tranquility 2 oz block
Sculpey III Polymer Clay - Tranquility 2 oz block
very good clay for making custom forms, dies, and models for working with metal clay
Basic Instructions:
Start with clean hands and work surface. Recommended work surfaces include Cool Tools Clayboard, glass surfaces, disposable foil, or wax paper. For best results, work light colors before dark colors to avoid staining clay. Condition clay by kneading until soft and smooth. When connecting two pieces of clay together, press firmly to ensure they stick together after baking. See baking times below. Do not use microwave oven. Do not exceed the recommended baking temperature or baking time.
Baking Times:
Sulpey III bakes to hardness in the oven at 275°F (130°C) for 15 minutes per 1/4" (6 mm) thickness. It requires no painting.
Changing the Consistency of Clay:
Sculpey clays have the unique ability to be made as firm or as soft as you like. To make your clay softer, simply add a few drops of Sculpey Mold Maker™ until desired consistency is reached. To make your clay more firm, roll your clay into a sheet. Sandwich your flat clay between 8-10 sheets of plain white copy paper. Place a weight on top of your clay (a phone book works great) and allow to sit for 1-24 hours, checking periodically.
Pre-Baking Test:
Home oven temperatures may vary significantly depending on your oven, affecting the baking of your clay. To test the temperature of your oven prior to baking, pinch off a small ball of clay. Shape a disc about a 1/2" in diameter, approximately a 1/4" thick. Fire at appropriate temperature. Remove from oven and check color. Any darkened areas indicate that your oven is too hot. Lower your oven temperature by 10ºF and repeat test.
Sculpey III has the best detail and workability of the polymer clays. Sculpey III has the same excellent handling qualities as regular Sculpey, only it's softer and more pliable, making it easy to condition. Sculpey III is soft, easy-to-use and stays soft until you bake. Polymer clay is also a wonderful way to explore designs without risking your precious metal clay. Work out your designs in this clay before executing in metal clay. Bake and use as a mold. Use with your metal clay to brighten up your designs.
Sculpey III Polymer Clay - Buried Treasure 2 oz block
Sculpey III Polymer Clay - Buried Treasure 2 oz block
very good clay for making custom forms, dies, and models for working with metal clay
Basic Instructions:
Start with clean hands and work surface. Recommended work surfaces include Cool Tools Clayboard, glass surfaces, disposable foil, or wax paper. For best results, work light colors before dark colors to avoid staining clay. Condition clay by kneading until soft and smooth. When connecting two pieces of clay together, press firmly to ensure they stick together after baking. See baking times below. Do not use microwave oven. Do not exceed the recommended baking temperature or baking time.
Baking Times:
Sulpey III bakes to hardness in the oven at 275°F (130°C) for 15 minutes per 1/4" (6 mm) thickness. It requires no painting.
Changing the Consistency of Clay:
Sculpey clays have the unique ability to be made as firm or as soft as you like. To make your clay softer, simply add a few drops of Sculpey Mold Maker™ until desired consistency is reached. To make your clay more firm, roll your clay into a sheet. Sandwich your flat clay between 8-10 sheets of plain white copy paper. Place a weight on top of your clay (a phone book works great) and allow to sit for 1-24 hours, checking periodically.
Pre-Baking Test:
Home oven temperatures may vary significantly depending on your oven, affecting the baking of your clay. To test the temperature of your oven prior to baking, pinch off a small ball of clay. Shape a disc about a 1/2" in diameter, approximately a 1/4" thick. Fire at appropriate temperature. Remove from oven and check color. Any darkened areas indicate that your oven is too hot. Lower your oven temperature by 10ºF and repeat test.
Sculpey III has the best detail and workability of the polymer clays. Sculpey III has the same excellent handling qualities as regular Sculpey, only it's softer and more pliable, making it easy to condition. Sculpey III is soft, easy-to-use and stays soft until you bake. Polymer clay is also a wonderful way to explore designs without risking your precious metal clay. Work out your designs in this clay before executing in metal clay. Bake and use as a mold. Use with your metal clay to brighten up your designs.
Sculpey III Polymer Clay - Teal Pearl 2 oz block
Sculpey III Polymer Clay - Teal Pearl 2 oz block
very good clay for making custom forms, dies, and models for working with metal clay
Basic Instructions:
Start with clean hands and work surface. Recommended work surfaces include Cool Tools Clayboard, glass surfaces, disposable foil, or wax paper. For best results, work light colors before dark colors to avoid staining clay. Condition clay by kneading until soft and smooth. When connecting two pieces of clay together, press firmly to ensure they stick together after baking. See baking times below. Do not use microwave oven. Do not exceed the recommended baking temperature or baking time.
Baking Times:
Sulpey III bakes to hardness in the oven at 275°F (130°C) for 15 minutes per 1/4" (6 mm) thickness. It requires no painting.
Changing the Consistency of Clay:
Sculpey clays have the unique ability to be made as firm or as soft as you like. To make your clay softer, simply add a few drops of Sculpey Mold Maker™ until desired consistency is reached. To make your clay more firm, roll your clay into a sheet. Sandwich your flat clay between 8-10 sheets of plain white copy paper. Place a weight on top of your clay (a phone book works great) and allow to sit for 1-24 hours, checking periodically.
Pre-Baking Test:
Home oven temperatures may vary significantly depending on your oven, affecting the baking of your clay. To test the temperature of your oven prior to baking, pinch off a small ball of clay. Shape a disc about a 1/2" in diameter, approximately a 1/4" thick. Fire at appropriate temperature. Remove from oven and check color. Any darkened areas indicate that your oven is too hot. Lower your oven temperature by 10ºF and repeat test.
Sculpey III has the best detail and workability of the polymer clays. Sculpey III has the same excellent handling qualities as regular Sculpey, only it's softer and more pliable, making it easy to condition. Sculpey III is soft, easy-to-use and stays soft until you bake. Polymer clay is also a wonderful way to explore designs without risking your precious metal clay. Work out your designs in this clay before executing in metal clay. Bake and use as a mold. Use with your metal clay to brighten up your designs.
Sculpey III Polymer Clay - Camouflage 2 oz block
Sculpey III Polymer Clay - Camouflage 2 oz block
very good clay for making custom forms, dies, and models for working with metal clay
Basic Instructions:
Start with clean hands and work surface. Recommended work surfaces include Cool Tools Clayboard, glass surfaces, disposable foil, or wax paper. For best results, work light colors before dark colors to avoid staining clay. Condition clay by kneading until soft and smooth. When connecting two pieces of clay together, press firmly to ensure they stick together after baking. See baking times below. Do not use microwave oven. Do not exceed the recommended baking temperature or baking time.
Baking Times:
Sulpey III bakes to hardness in the oven at 275°F (130°C) for 15 minutes per 1/4" (6 mm) thickness. It requires no painting.
Changing the Consistency of Clay:
Sculpey clays have the unique ability to be made as firm or as soft as you like. To make your clay softer, simply add a few drops of Sculpey Mold Maker™ until desired consistency is reached. To make your clay more firm, roll your clay into a sheet. Sandwich your flat clay between 8-10 sheets of plain white copy paper. Place a weight on top of your clay (a phone book works great) and allow to sit for 1-24 hours, checking periodically.
Pre-Baking Test:
Home oven temperatures may vary significantly depending on your oven, affecting the baking of your clay. To test the temperature of your oven prior to baking, pinch off a small ball of clay. Shape a disc about a 1/2" in diameter, approximately a 1/4" thick. Fire at appropriate temperature. Remove from oven and check color. Any darkened areas indicate that your oven is too hot. Lower your oven temperature by 10ºF and repeat test.
Sculpey III has the best detail and workability of the polymer clays. Sculpey III has the same excellent handling qualities as regular Sculpey, only it's softer and more pliable, making it easy to condition. Sculpey III is soft, easy-to-use and stays soft until you bake. Polymer clay is also a wonderful way to explore designs without risking your precious metal clay. Work out your designs in this clay before executing in metal clay. Bake and use as a mold. Use with your metal clay to brighten up your designs.
Sculpey III Polymer Clay - Princess Pearl 2 oz block
Sculpey III Polymer Clay - Princess Pearl 2 oz block
very good clay for making custom forms, dies, and models for working with metal clay
Basic Instructions:
Start with clean hands and work surface. Recommended work surfaces include Cool Tools Clayboard, glass surfaces, disposable foil, or wax paper. For best results, work light colors before dark colors to avoid staining clay. Condition clay by kneading until soft and smooth. When connecting two pieces of clay together, press firmly to ensure they stick together after baking. See baking times below. Do not use microwave oven. Do not exceed the recommended baking temperature or baking time.
Baking Times:
Sulpey III bakes to hardness in the oven at 275°F (130°C) for 15 minutes per 1/4" (6 mm) thickness. It requires no painting.
Changing the Consistency of Clay:
Sculpey clays have the unique ability to be made as firm or as soft as you like. To make your clay softer, simply add a few drops of Sculpey Mold Maker™ until desired consistency is reached. To make your clay more firm, roll your clay into a sheet. Sandwich your flat clay between 8-10 sheets of plain white copy paper. Place a weight on top of your clay (a phone book works great) and allow to sit for 1-24 hours, checking periodically.
Pre-Baking Test:
Home oven temperatures may vary significantly depending on your oven, affecting the baking of your clay. To test the temperature of your oven prior to baking, pinch off a small ball of clay. Shape a disc about a 1/2" in diameter, approximately a 1/4" thick. Fire at appropriate temperature. Remove from oven and check color. Any darkened areas indicate that your oven is too hot. Lower your oven temperature by 10ºF and repeat test.
Sculpey III has the best detail and workability of the polymer clays. Sculpey III has the same excellent handling qualities as regular Sculpey, only it's softer and more pliable, making it easy to condition. Sculpey III is soft, easy-to-use and stays soft until you bake. Polymer clay is also a wonderful way to explore designs without risking your precious metal clay. Work out your designs in this clay before executing in metal clay. Bake and use as a mold. Use with your metal clay to brighten up your designs.
Sculpey III Polymer Clay - Acid Yellow 2 oz block
Sculpey III Polymer Clay - Acid Yellow 2 oz block
very good clay for making custom forms, dies, and models for working with metal clay
Basic Instructions:
Start with clean hands and work surface. Recommended work surfaces include Cool Tools Clayboard, glass surfaces, disposable foil, or wax paper. For best results, work light colors before dark colors to avoid staining clay. Condition clay by kneading until soft and smooth. When connecting two pieces of clay together, press firmly to ensure they stick together after baking. See baking times below. Do not use microwave oven. Do not exceed the recommended baking temperature or baking time.
Baking Times:
Sulpey III bakes to hardness in the oven at 275°F (130°C) for 15 minutes per 1/4" (6 mm) thickness. It requires no painting.
Changing the Consistency of Clay:
Sculpey clays have the unique ability to be made as firm or as soft as you like. To make your clay softer, simply add a few drops of Sculpey Mold Maker™ until desired consistency is reached. To make your clay more firm, roll your clay into a sheet. Sandwich your flat clay between 8-10 sheets of plain white copy paper. Place a weight on top of your clay (a phone book works great) and allow to sit for 1-24 hours, checking periodically.
Pre-Baking Test:
Home oven temperatures may vary significantly depending on your oven, affecting the baking of your clay. To test the temperature of your oven prior to baking, pinch off a small ball of clay. Shape a disc about a 1/2" in diameter, approximately a 1/4" thick. Fire at appropriate temperature. Remove from oven and check color. Any darkened areas indicate that your oven is too hot. Lower your oven temperature by 10ºF and repeat test.
Sculpey III has the best detail and workability of the polymer clays. Sculpey III has the same excellent handling qualities as regular Sculpey, only it's softer and more pliable, making it easy to condition. Sculpey III is soft, easy-to-use and stays soft until you bake. Polymer clay is also a wonderful way to explore designs without risking your precious metal clay. Work out your designs in this clay before executing in metal clay. Bake and use as a mold. Use with your metal clay to brighten up your designs.
Sculpey III Polymer Clay - Translucent 2 oz block
Sculpey III Polymer Clay - Translucent 2 oz block
very good clay for making custom forms, dies, and models for working with metal clay
Basic Instructions:
Start with clean hands and work surface. Recommended work surfaces include Cool Tools Clayboard, glass surfaces, disposable foil, or wax paper. For best results, work light colors before dark colors to avoid staining clay. Condition clay by kneading until soft and smooth. When connecting two pieces of clay together, press firmly to ensure they stick together after baking. See baking times below. Do not use microwave oven. Do not exceed the recommended baking temperature or baking time.
Baking Times:
Sulpey III bakes to hardness in the oven at 275°F (130°C) for 15 minutes per 1/4" (6 mm) thickness. It requires no painting.
Changing the Consistency of Clay:
Sculpey clays have the unique ability to be made as firm or as soft as you like. To make your clay softer, simply add a few drops of Sculpey Mold Maker™ until desired consistency is reached. To make your clay more firm, roll your clay into a sheet. Sandwich your flat clay between 8-10 sheets of plain white copy paper. Place a weight on top of your clay (a phone book works great) and allow to sit for 1-24 hours, checking periodically.
Pre-Baking Test:
Home oven temperatures may vary significantly depending on your oven, affecting the baking of your clay. To test the temperature of your oven prior to baking, pinch off a small ball of clay. Shape a disc about a 1/2" in diameter, approximately a 1/4" thick. Fire at appropriate temperature. Remove from oven and check color. Any darkened areas indicate that your oven is too hot. Lower your oven temperature by 10ºF and repeat test.
Sculpey III has the best detail and workability of the polymer clays. Sculpey III has the same excellent handling qualities as regular Sculpey, only it's softer and more pliable, making it easy to condition. Sculpey III is soft, easy-to-use and stays soft until you bake.
Polymer clay is also a wonderful way to explore designs without risking your precious metal clay. Work out your designs in this clay before executing in metal clay. Bake and use as a mold. Use with your metal clay to brighten up your designs.
Sculpey III Polymer Clay - Black 2 oz block
Sculpey III Polymer Clay - Black 2 oz block
very good clay for making custom forms, dies, and models for working with metal clay
Basic Instructions:
Start with clean hands and work surface. Recommended work surfaces include Cool Tools Clayboard, glass surfaces, disposable foil, or wax paper. For best results, work light colors before dark colors to avoid staining clay. Condition clay by kneading until soft and smooth. When connecting two pieces of clay together, press firmly to ensure they stick together after baking. See baking times below. Do not use microwave oven. Do not exceed the recommended baking temperature or baking time.
Baking Times:
Sulpey III bakes to hardness in the oven at 275°F (130°C) for 15 minutes per 1/4" (6 mm) thickness. It requires no painting.
Changing the Consistency of Clay:
Sculpey clays have the unique ability to be made as firm or as soft as you like. To make your clay softer, simply add a few drops of Sculpey Mold Maker™ until desired consistency is reached. To make your clay more firm, roll your clay into a sheet. Sandwich your flat clay between 8-10 sheets of plain white copy paper. Place a weight on top of your clay (a phone book works great) and allow to sit for 1-24 hours, checking periodically.
Pre-Baking Test:
Home oven temperatures may vary significantly depending on your oven, affecting the baking of your clay. To test the temperature of your oven prior to baking, pinch off a small ball of clay. Shape a disc about a 1/2" in diameter, approximately a 1/4" thick. Fire at appropriate temperature. Remove from oven and check color. Any darkened areas indicate that your oven is too hot. Lower your oven temperature by 10ºF and repeat test.
Sculpey III has the best detail and workability of the polymer clays. Sculpey III has the same excellent handling qualities as regular Sculpey, only it's softer and more pliable, making it easy to condition. Sculpey III is soft, easy-to-use and stays soft until you bake.
Polymer clay is also a wonderful way to explore designs without risking your precious metal clay. Work out your designs in this clay before executing in metal clay. Bake and use as a mold. Use with your metal clay to brighten up your designs.
Sculpey III Polymer Clay - Beige 2 oz block
Sculpey III Polymer Clay - Beige 2 oz block
very good clay for making custom forms, dies, and models for working with metal clay
Basic Instructions:
Start with clean hands and work surface. Recommended work surfaces include Cool Tools Clayboard, glass surfaces, disposable foil, or wax paper. For best results, work light colors before dark colors to avoid staining clay. Condition clay by kneading until soft and smooth. When connecting two pieces of clay together, press firmly to ensure they stick together after baking. See baking times below. Do not use microwave oven. Do not exceed the recommended baking temperature or baking time.
Baking Times:
Sulpey III bakes to hardness in the oven at 275°F (130°C) for 15 minutes per 1/4" (6 mm) thickness. It requires no painting.
Changing the Consistency of Clay:
Sculpey clays have the unique ability to be made as firm or as soft as you like. To make your clay softer, simply add a few drops of Sculpey Mold Maker™ until desired consistency is reached. To make your clay more firm, roll your clay into a sheet. Sandwich your flat clay between 8-10 sheets of plain white copy paper. Place a weight on top of your clay (a phone book works great) and allow to sit for 1-24 hours, checking periodically.
Pre-Baking Test:
Home oven temperatures may vary significantly depending on your oven, affecting the baking of your clay. To test the temperature of your oven prior to baking, pinch off a small ball of clay. Shape a disc about a 1/2" in diameter, approximately a 1/4" thick. Fire at appropriate temperature. Remove from oven and check color. Any darkened areas indicate that your oven is too hot. Lower your oven temperature by 10ºF and repeat test.
Sculpey III has the best detail and workability of the polymer clays. Sculpey III has the same excellent handling qualities as regular Sculpey, only it's softer and more pliable, making it easy to condition. Sculpey III is soft, easy-to-use and stays soft until you bake.
Polymer clay is also a wonderful way to explore designs without risking your precious metal clay. Work out your designs in this clay before executing in metal clay. Bake and use as a mold. Use with your metal clay to brighten up your designs.
Sculpey III Polymer Clay - Leaf Green 2 oz block
Sculpey III Polymer Clay - Leaf Green 2 oz block
very good clay for making custom forms, dies, and models for working with metal clay
Basic Instructions:
Start with clean hands and work surface. Recommended work surfaces include Cool Tools Clayboard, glass surfaces, disposable foil, or wax paper. For best results, work light colors before dark colors to avoid staining clay. Condition clay by kneading until soft and smooth. When connecting two pieces of clay together, press firmly to ensure they stick together after baking. See baking times below. Do not use microwave oven. Do not exceed the recommended baking temperature or baking time.
Baking Times:
Sulpey III bakes to hardness in the oven at 275°F (130°C) for 15 minutes per 1/4" (6 mm) thickness. It requires no painting.
Changing the Consistency of Clay:
Sculpey clays have the unique ability to be made as firm or as soft as you like. To make your clay softer, simply add a few drops of Sculpey Mold Maker™ until desired consistency is reached. To make your clay more firm, roll your clay into a sheet. Sandwich your flat clay between 8-10 sheets of plain white copy paper. Place a weight on top of your clay (a phone book works great) and allow to sit for 1-24 hours, checking periodically.
Pre-Baking Test:
Home oven temperatures may vary significantly depending on your oven, affecting the baking of your clay. To test the temperature of your oven prior to baking, pinch off a small ball of clay. Shape a disc about a 1/2" in diameter, approximately a 1/4" thick. Fire at appropriate temperature. Remove from oven and check color. Any darkened areas indicate that your oven is too hot. Lower your oven temperature by 10ºF and repeat test.
Sculpey III has the best detail and workability of the polymer clays. Sculpey III has the same excellent handling qualities as regular Sculpey, only it's softer and more pliable, making it easy to condition. Sculpey III is soft, easy-to-use and stays soft until you bake.
Polymer clay is also a wonderful way to explore designs without risking your precious metal clay. Work out your designs in this clay before executing in metal clay. Bake and use as a mold. Use with your metal clay to brighten up your designs.
Sculpey III Polymer Clay - Purple 2 oz block
Sculpey III Polymer Clay - Purple 2 oz block
very good clay for making custom forms, dies, and models for working with metal clay
Basic Instructions:
Start with clean hands and work surface. Recommended work surfaces include Cool Tools Clayboard, glass surfaces, disposable foil, or wax paper. For best results, work light colors before dark colors to avoid staining clay. Condition clay by kneading until soft and smooth. When connecting two pieces of clay together, press firmly to ensure they stick together after baking. See baking times below. Do not use microwave oven. Do not exceed the recommended baking temperature or baking time.
Baking Times:
Sulpey III bakes to hardness in the oven at 275°F (130°C) for 15 minutes per 1/4" (6 mm) thickness. It requires no painting.
Changing the Consistency of Clay:
Sculpey clays have the unique ability to be made as firm or as soft as you like. To make your clay softer, simply add a few drops of Sculpey Mold Maker™ until desired consistency is reached. To make your clay more firm, roll your clay into a sheet. Sandwich your flat clay between 8-10 sheets of plain white copy paper. Place a weight on top of your clay (a phone book works great) and allow to sit for 1-24 hours, checking periodically.
Pre-Baking Test:
Home oven temperatures may vary significantly depending on your oven, affecting the baking of your clay. To test the temperature of your oven prior to baking, pinch off a small ball of clay. Shape a disc about a 1/2" in diameter, approximately a 1/4" thick. Fire at appropriate temperature. Remove from oven and check color. Any darkened areas indicate that your oven is too hot. Lower your oven temperature by 10ºF and repeat test.
Sculpey III has the best detail and workability of the polymer clays. Sculpey III has the same excellent handling qualities as regular Sculpey, only it's softer and more pliable, making it easy to condition. Sculpey III is soft, easy-to-use and stays soft until you bake.
Polymer clay is also a wonderful way to explore designs without risking your precious metal clay. Work out your designs in this clay before executing in metal clay. Bake and use as a mold. Use with your metal clay to brighten up your designs.
Sculpey III Polymer Clay - Pearl 2 oz block
Sculpey III Polymer Clay - Pearl 2 oz block
very good clay for making custom forms, dies, and models for working with metal clay
Basic Instructions:
Start with clean hands and work surface. Recommended work surfaces include Cool Tools Clayboard, glass surfaces, disposable foil, or wax paper. For best results, work light colors before dark colors to avoid staining clay. Condition clay by kneading until soft and smooth. When connecting two pieces of clay together, press firmly to ensure they stick together after baking. See baking times below. Do not use microwave oven. Do not exceed the recommended baking temperature or baking time.
Baking Times:
Sulpey III bakes to hardness in the oven at 275°F (130°C) for 15 minutes per 1/4" (6 mm) thickness. It requires no painting.
Changing the Consistency of Clay:
Sculpey clays have the unique ability to be made as firm or as soft as you like. To make your clay softer, simply add a few drops of Sculpey Mold Maker™ until desired consistency is reached. To make your clay more firm, roll your clay into a sheet. Sandwich your flat clay between 8-10 sheets of plain white copy paper. Place a weight on top of your clay (a phone book works great) and allow to sit for 1-24 hours, checking periodically.
Pre-Baking Test:
Home oven temperatures may vary significantly depending on your oven, affecting the baking of your clay. To test the temperature of your oven prior to baking, pinch off a small ball of clay. Shape a disc about a 1/2" in diameter, approximately a 1/4" thick. Fire at appropriate temperature. Remove from oven and check color. Any darkened areas indicate that your oven is too hot. Lower your oven temperature by 10ºF and repeat test.
Sculpey III has the best detail and workability of the polymer clays. Sculpey III has the same excellent handling qualities as regular Sculpey, only it's softer and more pliable, making it easy to condition. Sculpey III is soft, easy-to-use and stays soft until you bake.
Polymer clay is also a wonderful way to explore designs without risking your precious metal clay. Work out your designs in this clay before executing in metal clay. Bake and use as a mold. Use with your metal clay to brighten up your designs.
Sculpey III Polymer Clay - Suede Brown 2 oz block
Sculpey III Polymer Clay - Suede Brown 2 oz block
very good clay for making custom forms, dies, and models for working with metal clay
Basic Instructions:
Start with clean hands and work surface. Recommended work surfaces include Cool Tools Clayboard, glass surfaces, disposable foil, or wax paper. For best results, work light colors before dark colors to avoid staining clay. Condition clay by kneading until soft and smooth. When connecting two pieces of clay together, press firmly to ensure they stick together after baking. See baking times below. Do not use microwave oven. Do not exceed the recommended baking temperature or baking time.
Baking Times:
Sulpey III bakes to hardness in the oven at 275°F (130°C) for 15 minutes per 1/4" (6 mm) thickness. It requires no painting.
Changing the Consistency of Clay:
Sculpey clays have the unique ability to be made as firm or as soft as you like. To make your clay softer, simply add a few drops of Sculpey Mold Maker™ until desired consistency is reached. To make your clay more firm, roll your clay into a sheet. Sandwich your flat clay between 8-10 sheets of plain white copy paper. Place a weight on top of your clay (a phone book works great) and allow to sit for 1-24 hours, checking periodically.
Pre-Baking Test:
Home oven temperatures may vary significantly depending on your oven, affecting the baking of your clay. To test the temperature of your oven prior to baking, pinch off a small ball of clay. Shape a disc about a 1/2" in diameter, approximately a 1/4" thick. Fire at appropriate temperature. Remove from oven and check color. Any darkened areas indicate that your oven is too hot. Lower your oven temperature by 10ºF and repeat test.
Sculpey III has the best detail and workability of the polymer clays. Sculpey III has the same excellent handling qualities as regular Sculpey, only it's softer and more pliable, making it easy to condition. Sculpey III is soft, easy-to-use and stays soft until you bake.
Polymer clay is also a wonderful way to explore designs without risking your precious metal clay. Work out your designs in this clay before executing in metal clay. Bake and use as a mold. Use with your metal clay to brighten up your designs.
Sculpey III Polymer Clay - Jewelry Gold 2 oz block
Sculpey III Polymer Clay - Jewelry Gold 2 oz block
very good clay for making custom forms, dies, and models for working with metal clay
Basic Instructions:
Start with clean hands and work surface. Recommended work surfaces include Cool Tools Clayboard, glass surfaces, disposable foil, or wax paper. For best results, work light colors before dark colors to avoid staining clay. Condition clay by kneading until soft and smooth. When connecting two pieces of clay together, press firmly to ensure they stick together after baking. See baking times below. Do not use microwave oven. Do not exceed the recommended baking temperature or baking time.
Baking Times:
Sulpey III bakes to hardness in the oven at 275°F (130°C) for 15 minutes per 1/4" (6 mm) thickness. It requires no painting.
Changing the Consistency of Clay:
Sculpey clays have the unique ability to be made as firm or as soft as you like. To make your clay softer, simply add a few drops of Sculpey Mold Maker™ until desired consistency is reached. To make your clay more firm, roll your clay into a sheet. Sandwich your flat clay between 8-10 sheets of plain white copy paper. Place a weight on top of your clay (a phone book works great) and allow to sit for 1-24 hours, checking periodically.
Pre-Baking Test:
Home oven temperatures may vary significantly depending on your oven, affecting the baking of your clay. To test the temperature of your oven prior to baking, pinch off a small ball of clay. Shape a disc about a 1/2" in diameter, approximately a 1/4" thick. Fire at appropriate temperature. Remove from oven and check color. Any darkened areas indicate that your oven is too hot. Lower your oven temperature by 10ºF and repeat test.
Sculpey III has the best detail and workability of the polymer clays. Sculpey III has the same excellent handling qualities as regular Sculpey, only it's softer and more pliable, making it easy to condition. Sculpey III is soft, easy-to-use and stays soft until you bake.
Polymer clay is also a wonderful way to explore designs without risking your precious metal clay. Work out your designs in this clay before executing in metal clay. Bake and use as a mold. Use with your metal clay to brighten up your designs.
Sculpey III Polymer Clay - Sky Blue 2 oz block
Sculpey III Polymer Clay - Sky Blue 2 oz block
very good clay for making custom forms, dies, and models for working with metal clay
Basic Instructions:
Start with clean hands and work surface. Recommended work surfaces include Cool Tools Clayboard, glass surfaces, disposable foil, or wax paper. For best results, work light colors before dark colors to avoid staining clay. Condition clay by kneading until soft and smooth. When connecting two pieces of clay together, press firmly to ensure they stick together after baking. See baking times below. Do not use microwave oven. Do not exceed the recommended baking temperature or baking time.
Baking Times:
Sulpey III bakes to hardness in the oven at 275°F (130°C) for 15 minutes per 1/4" (6 mm) thickness. It requires no painting.
Changing the Consistency of Clay:
Sculpey clays have the unique ability to be made as firm or as soft as you like. To make your clay softer, simply add a few drops of Sculpey Mold Maker™ until desired consistency is reached. To make your clay more firm, roll your clay into a sheet. Sandwich your flat clay between 8-10 sheets of plain white copy paper. Place a weight on top of your clay (a phone book works great) and allow to sit for 1-24 hours, checking periodically.
Pre-Baking Test:
Home oven temperatures may vary significantly depending on your oven, affecting the baking of your clay. To test the temperature of your oven prior to baking, pinch off a small ball of clay. Shape a disc about a 1/2" in diameter, approximately a 1/4" thick. Fire at appropriate temperature. Remove from oven and check color. Any darkened areas indicate that your oven is too hot. Lower your oven temperature by 10ºF and repeat test.
Sculpey III has the best detail and workability of the polymer clays. Sculpey III has the same excellent handling qualities as regular Sculpey, only it's softer and more pliable, making it easy to condition. Sculpey III is soft, easy-to-use and stays soft until you bake. Polymer clay is also a wonderful way to explore designs without risking your precious metal clay. Work out your designs in this clay before executing in metal clay. Bake and use as a mold. Use with your metal clay to brighten up your designs.
Premo Sculpey Polymer Clay - White 2 oz block
Premo Sculpey Polymer Clay - White 2 oz block
very good clay for making custom forms, dies, and models for working with metal clay
Basic Instructions:
Start with clean hands and work surface. Recommended work surfaces include Cool Tools Clayboard, glass surfaces, disposable foil, or wax paper. For best results, work light colors before dark colors to avoid staining clay. Condition clay by kneading until soft and smooth. When connecting two pieces of clay together, press firmly to ensure they stick together after baking. See baking times below. Do not use microwave oven. Do not exceed the recommended baking temperature or baking time.
Baking Times:
Premo! Sculpey bakes to hardness in the oven at 275°F (130°C) for 30 minutes per 1/4" (6 mm) thickness. It requires no painting.
Changing the Consistency of Clay:
Sculpey clays have the unique ability to be made as firm or as soft as you like. To make your clay softer, simply add a few drops of Sculpey Mold Maker™ until desired consistency is reached. To make your clay more firm, roll your clay into a sheet. Sandwich your flat clay between 8-10 sheets of plain white copy paper. Place a weight on top of your clay (a phone book works great) and allow to sit for 1-24 hours, checking periodically.
Pre-Baking Test:
Home oven temperatures may vary significantly depending on your oven, affecting the baking of your clay. To test the temperature of your oven prior to baking, pinch off a small ball of clay. Shape a disc about a 1/2" in diameter, approximately a 1/4" thick. Fire at appropriate temperature. Remove from oven and check color. Any darkened areas indicate that your oven is too hot. Lower your oven temperature by 10ºF and repeat test.
Premo! Sculpey is an artist's dream come true! Premo! Sculpey is firmer than Sculpey III, and extremely durable when baked. After kneading, Premo! Sculpey is soft enough to blend easily, but firm enough to hold fine detail and apply special techniques. Because Premo! Sculpey retains flexibility, the finished product remains very strong and durable. This unique characteristic makes it the most durable clay and is ideal for jewelry, home decor, and other decorative items.
Polymer clay is also a wonderful way to explore designs without risking your precious metal clay. Work out your designs in this clay before executing in metal clay. Bake and use as a mold. Use polymer clay to add brilliant color to your jewelry designs.
Premo Sculpey Polymer Clay - Spanish Olive 2 oz block
Premo Sculpey Polymer Clay - Spanish Olive 2 oz block
very good clay for making custom forms, dies, and models for working with metal clay
Basic Instructions:
Start with clean hands and work surface. Recommended work surfaces include Cool Tools Clayboard, glass surfaces, disposable foil, or wax paper. For best results, work light colors before dark colors to avoid staining clay. Condition clay by kneading until soft and smooth. When connecting two pieces of clay together, press firmly to ensure they stick together after baking. See baking times below. Do not use microwave oven. Do not exceed the recommended baking temperature or baking time.
Baking Times:
Premo! Sculpey bakes to hardness in the oven at 275°F (130°C) for 30 minutes per 1/4" (6 mm) thickness. It requires no painting.
Changing the Consistency of Clay:
Sculpey clays have the unique ability to be made as firm or as soft as you like. To make your clay softer, simply add a few drops of Sculpey Mold Maker™ until desired consistency is reached. To make your clay more firm, roll your clay into a sheet. Sandwich your flat clay between 8-10 sheets of plain white copy paper. Place a weight on top of your clay (a phone book works great) and allow to sit for 1-24 hours, checking periodically.
Pre-Baking Test:
Home oven temperatures may vary significantly depending on your oven, affecting the baking of your clay. To test the temperature of your oven prior to baking, pinch off a small ball of clay. Shape a disc about a 1/2" in diameter, approximately a 1/4" thick. Fire at appropriate temperature. Remove from oven and check color. Any darkened areas indicate that your oven is too hot. Lower your oven temperature by 10ºF and repeat test.
Premo! Sculpey is an artist's dream come true! Premo! Sculpey is firmer than Sculpey III, and extremely durable when baked. After kneading, Premo! Sculpey is soft enough to blend easily, but firm enough to hold fine detail and apply special techniques. Because Premo! Sculpey retains flexibility, the finished product remains very strong and durable. This unique characteristic makes it the most durable clay and is ideal for jewelry, home decor, and other decorative items.
Polymer clay is also a wonderful way to explore designs without risking your precious metal clay. Work out your designs in this clay before executing in metal clay. Bake and use as a mold. Use polymer clay to add brilliant color to your jewelry designs.
Premo Sculpey Polymer Clay - Blush 2 oz block
Premo Sculpey Polymer Clay - Blush 2 oz block
very good clay for making custom forms, dies, and models for working with metal clay
Basic Instructions:
Start with clean hands and work surface. Recommended work surfaces include Cool Tools Clayboard, glass surfaces, disposable foil, or wax paper. For best results, work light colors before dark colors to avoid staining clay. Condition clay by kneading until soft and smooth. When connecting two pieces of clay together, press firmly to ensure they stick together after baking. See baking times below. Do not use microwave oven. Do not exceed the recommended baking temperature or baking time.
Baking Times:
Premo! Sculpey bakes to hardness in the oven at 275°F (130°C) for 30 minutes per 1/4" (6 mm) thickness. It requires no painting.
Changing the Consistency of Clay:
Sculpey clays have the unique ability to be made as firm or as soft as you like. To make your clay softer, simply add a few drops of Sculpey Mold Maker™ until desired consistency is reached. To make your clay more firm, roll your clay into a sheet. Sandwich your flat clay between 8-10 sheets of plain white copy paper. Place a weight on top of your clay (a phone book works great) and allow to sit for 1-24 hours, checking periodically.
Pre-Baking Test:
Home oven temperatures may vary significantly depending on your oven, affecting the baking of your clay. To test the temperature of your oven prior to baking, pinch off a small ball of clay. Shape a disc about a 1/2" in diameter, approximately a 1/4" thick. Fire at appropriate temperature. Remove from oven and check color. Any darkened areas indicate that your oven is too hot. Lower your oven temperature by 10ºF and repeat test.
Premo! Sculpey is an artist's dream come true! Premo! Sculpey is firmer than Sculpey III, and extremely durable when baked. After kneading, Premo! Sculpey is soft enough to blend easily, but firm enough to hold fine detail and apply special techniques. Because Premo! Sculpey retains flexibility, the finished product remains very strong and durable. This unique characteristic makes it the most durable clay and is ideal for jewelry, home decor, and other decorative items.
Polymer clay is also a wonderful way to explore designs without risking your precious metal clay. Work out your designs in this clay before executing in metal clay. Bake and use as a mold. Use polymer clay to add brilliant color to your jewelry designs.
Premo Sculpey Polymer Clay - Wasabi 2 oz block
Premo Sculpey Polymer Clay - Wasabi 2 oz block
p>A very good clay for making custom forms, dies, and models for working with metal clay.
Basic Instructions:Start with clean hands and work surface. Recommended work surfaces include Cool Tools Clayboard, glass surfaces, disposable foil, or wax paper. For best results, work light colors before dark colors to avoid staining clay. Condition clay by kneading until soft and smooth. When connecting two pieces of clay together, press firmly to ensure they stick together after baking. See baking times below. Do not use microwave oven. Do not exceed the recommended baking temperature or baking time.
Baking Times:Premo! Sculpey bakes to hardness in the oven at 275°F (130°C) for 30 minutes per 1/4" (6 mm) thickness. It requires no painting.
Changing the Consistency of Clay:Sculpey clays have the unique ability to be made as firm or as soft as you like. To make your clay softer, simply add a few drops of Sculpey Mold Maker™ until desired consistency is reached. To make your clay more firm, roll your clay into a sheet. Sandwich your flat clay between 8-10 sheets of plain white copy paper. Place a weight on top of your clay (a phone book works great) and allow to sit for 1-24 hours, checking periodically.
Pre-Baking Test:Home oven temperatures may vary significantly depending on your oven, affecting the baking of your clay. To test the temperature of your oven prior to baking, pinch off a small ball of clay. Shape a disc about a 1/2" in diameter, approximately a 1/4" thick. Fire at appropriate temperature. Remove from oven and check color. Any darkened areas indicate that your oven is too hot. Lower your oven temperature by 10ºF and repeat test.
Premo! Sculpey is an artist's dream come true! Premo! Sculpey is firmer than Sculpey III, and extremely durable when baked. After kneading, Premo! Sculpey is soft enough to blend easily, but firm enough to hold fine detail and apply special techniques. Because Premo! Sculpey retains flexibility, the finished product remains very strong and durable. This unique characteristic makes it the most durable clay and is ideal for jewelry, home decor, and other decorative items.
Polymer clay is also a wonderful way to explore designs without risking your precious metal clay. Work out your designs in this clay before executing in metal clay. Bake and use as a mold. Use polymer clay to add brilliant color to your jewelry designs.
Premo Sculpey Polymer Clay - Pomegranate 2 oz block
Premo Sculpey Polymer Clay - Pomegranate 2 oz block
very good clay for making custom forms, dies, and models for working with metal clay
Basic Instructions:
Start with clean hands and work surface. Recommended work surfaces include Cool Tools Clayboard, glass surfaces, disposable foil, or wax paper. For best results, work light colors before dark colors to avoid staining clay. Condition clay by kneading until soft and smooth. When connecting two pieces of clay together, press firmly to ensure they stick together after baking. See baking times below. Do not use microwave oven. Do not exceed the recommended baking temperature or baking time.
Baking Times:
Premo! Sculpey bakes to hardness in the oven at 275°F (130°C) for 30 minutes per 1/4" (6 mm) thickness. It requires no painting.
Changing the Consistency of Clay:
Sculpey clays have the unique ability to be made as firm or as soft as you like. To make your clay softer, simply add a few drops of Sculpey Mold Maker™ until desired consistency is reached. To make your clay more firm, roll your clay into a sheet. Sandwich your flat clay between 8-10 sheets of plain white copy paper. Place a weight on top of your clay (a phone book works great) and allow to sit for 1-24 hours, checking periodically.
Pre-Baking Test:
Home oven temperatures may vary significantly depending on your oven, affecting the baking of your clay. To test the temperature of your oven prior to baking, pinch off a small ball of clay. Shape a disc about a 1/2" in diameter, approximately a 1/4" thick. Fire at appropriate temperature. Remove from oven and check color. Any darkened areas indicate that your oven is too hot. Lower your oven temperature by 10ºF and repeat test.
Premo! Sculpey is an artist's dream come true! Premo! Sculpey is firmer than Sculpey III, and extremely durable when baked. After kneading, Premo! Sculpey is soft enough to blend easily, but firm enough to hold fine detail and apply special techniques. Because Premo! Sculpey retains flexibility, the finished product remains very strong and durable. This unique characteristic makes it the most durable clay and is ideal for jewelry, home decor, and other decorative items. Polymer clay is also a wonderful way to explore designs without risking your precious metal clay. Work out your designs in this clay before executing in metal clay. Bake and use as a mold. Use polymer clay to add brilliant color to your jewelry designs.
Premo Sculpey Polymer Clay - Black 2 oz block
Premo Sculpey Polymer Clay - Black 2 oz block
very good clay for making custom forms, dies, and models for working with metal clay
Basic Instructions:
Start with clean hands and work surface. Recommended work surfaces include Cool Tools Clayboard, glass surfaces, disposable foil, or wax paper. For best results, work light colors before dark colors to avoid staining clay. Condition clay by kneading until soft and smooth. When connecting two pieces of clay together, press firmly to ensure they stick together after baking. See baking times below. Do not use microwave oven. Do not exceed the recommended baking temperature or baking time.
Baking Times:
Premo! Sculpey bakes to hardness in the oven at 275°F (130°C) for 30 minutes per 1/4" (6 mm) thickness. It requires no painting.
Changing the Consistency of Clay:
Sculpey clays have the unique ability to be made as firm or as soft as you like. To make your clay softer, simply add a few drops of Sculpey Mold Maker™ until desired consistency is reached. To make your clay more firm, roll your clay into a sheet. Sandwich your flat clay between 8-10 sheets of plain white copy paper. Place a weight on top of your clay (a phone book works great) and allow to sit for 1-24 hours, checking periodically.
Pre-Baking Test:
Home oven temperatures may vary significantly depending on your oven, affecting the baking of your clay. To test the temperature of your oven prior to baking, pinch off a small ball of clay. Shape a disc about a 1/2" in diameter, approximately a 1/4" thick. Fire at appropriate temperature. Remove from oven and check color. Any darkened areas indicate that your oven is too hot. Lower your oven temperature by 10ºF and repeat test.
Premo! Sculpey is an artist's dream come true! Premo! Sculpey is firmer than Sculpey III, and extremely durable when baked. After kneading, Premo! Sculpey is soft enough to blend easily, but firm enough to hold fine detail and apply special techniques. Because Premo! Sculpey retains flexibility, the finished product remains very strong and durable. This unique characteristic makes it the most durable clay and is ideal for jewelry, home decor, and other decorative items.
Polymer clay is also a wonderful way to explore designs without risking your precious metal clay. Work out your designs in this clay before executing in metal clay. Bake and use as a mold. Use polymer clay to add brilliant color to your jewelry designs.
Premo Sculpey Polymer Clay - Ecru 2 oz block
Premo Sculpey Polymer Clay - Ecru 2 oz block
very good clay for making custom forms, dies, and models for working with metal clay
Basic Instructions:
Start with clean hands and work surface. Recommended work surfaces include Cool Tools Clayboard, glass surfaces, disposable foil, or wax paper. For best results, work light colors before dark colors to avoid staining clay. Condition clay by kneading until soft and smooth. When connecting two pieces of clay together, press firmly to ensure they stick together after baking. See baking times below. Do not use microwave oven. Do not exceed the recommended baking temperature or baking time.
Baking Times:
Premo! Sculpey bakes to hardness in the oven at 275°F (130°C) for 30 minutes per 1/4" (6 mm) thickness. It requires no painting.
Changing the Consistency of Clay:
Sculpey clays have the unique ability to be made as firm or as soft as you like. To make your clay softer, simply add a few drops of Sculpey Mold Maker™ until desired consistency is reached. To make your clay more firm, roll your clay into a sheet. Sandwich your flat clay between 8-10 sheets of plain white copy paper. Place a weight on top of your clay (a phone book works great) and allow to sit for 1-24 hours, checking periodically.
Pre-Baking Test:
Home oven temperatures may vary significantly depending on your oven, affecting the baking of your clay. To test the temperature of your oven prior to baking, pinch off a small ball of clay. Shape a disc about a 1/2" in diameter, approximately a 1/4" thick. Fire at appropriate temperature. Remove from oven and check color. Any darkened areas indicate that your oven is too hot. Lower your oven temperature by 10ºF and repeat test.
Premo! Sculpey is an artist's dream come true! Premo! Sculpey is firmer than Sculpey III, and extremely durable when baked. After kneading, Premo! Sculpey is soft enough to blend easily, but firm enough to hold fine detail and apply special techniques. Because Premo! Sculpey retains flexibility, the finished product remains very strong and durable. This unique characteristic makes it the most durable clay and is ideal for jewelry, home decor, and other decorative items.
Polymer clay is also a wonderful way to explore designs without risking your precious metal clay. Work out your designs in this clay before executing in metal clay. Bake and use as a mold. Use polymer clay to add brilliant color to your jewelry designs.
Premo Sculpey Polymer Clay - Green 2 oz block
Premo Sculpey Polymer Clay - Green 2 oz block
very good clay for making custom forms, dies, and models for working with metal clay
Basic Instructions:
Start with clean hands and work surface. Recommended work surfaces include Cool Tools Clayboard, glass surfaces, disposable foil, or wax paper. For best results, work light colors before dark colors to avoid staining clay. Condition clay by kneading until soft and smooth. When connecting two pieces of clay together, press firmly to ensure they stick together after baking. See baking times below. Do not use microwave oven. Do not exceed the recommended baking temperature or baking time.
Baking Times:
Premo! Sculpey bakes to hardness in the oven at 275°F (130°C) for 30 minutes per 1/4" (6 mm) thickness. It requires no painting.
Changing the Consistency of Clay:
Sculpey clays have the unique ability to be made as firm or as soft as you like. To make your clay softer, simply add a few drops of Sculpey Mold Maker™ until desired consistency is reached. To make your clay more firm, roll your clay into a sheet. Sandwich your flat clay between 8-10 sheets of plain white copy paper. Place a weight on top of your clay (a phone book works great) and allow to sit for 1-24 hours, checking periodically.
Pre-Baking Test:
Home oven temperatures may vary significantly depending on your oven, affecting the baking of your clay. To test the temperature of your oven prior to baking, pinch off a small ball of clay. Shape a disc about a 1/2" in diameter, approximately a 1/4" thick. Fire at appropriate temperature. Remove from oven and check color. Any darkened areas indicate that your oven is too hot. Lower your oven temperature by 10ºF and repeat test.
Premo! Sculpey is an artist's dream come true! Premo! Sculpey is firmer than Sculpey III, and extremely durable when baked. After kneading, Premo! Sculpey is soft enough to blend easily, but firm enough to hold fine detail and apply special techniques. Because Premo! Sculpey retains flexibility, the finished product remains very strong and durable. This unique characteristic makes it the most durable clay and is ideal for jewelry, home decor, and other decorative items.
Polymer clay is also a wonderful way to explore designs without risking your precious metal clay. Work out your designs in this clay before executing in metal clay. Bake and use as a mold. Use polymer clay to add brilliant color to your jewelry designs.
Premo Sculpey Polymer Clay - Raw Sienna 2 oz block
Premo Sculpey Polymer Clay - Raw Sienna 2 oz block
p>A very good clay for making custom forms, dies, and models for working with metal clay.
Basic Instructions:Start with clean hands and work surface. Recommended work surfaces include Cool Tools Clayboard, glass surfaces, disposable foil, or wax paper. For best results, work light colors before dark colors to avoid staining clay. Condition clay by kneading until soft and smooth. When connecting two pieces of clay together, press firmly to ensure they stick together after baking. See baking times below. Do not use microwave oven. Do not exceed the recommended baking temperature or baking time.
Baking Times:Premo! Sculpey bakes to hardness in the oven at 275°F (130°C) for 30 minutes per 1/4" (6 mm) thickness. It requires no painting.
Changing the Consistency of Clay:Sculpey clays have the unique ability to be made as firm or as soft as you like. To make your clay softer, simply add a few drops of Sculpey Mold Maker™ until desired consistency is reached. To make your clay more firm, roll your clay into a sheet. Sandwich your flat clay between 8-10 sheets of plain white copy paper. Place a weight on top of your clay (a phone book works great) and allow to sit for 1-24 hours, checking periodically.
Pre-Baking Test:Home oven temperatures may vary significantly depending on your oven, affecting the baking of your clay. To test the temperature of your oven prior to baking, pinch off a small ball of clay. Shape a disc about a 1/2" in diameter, approximately a 1/4" thick. Fire at appropriate temperature. Remove from oven and check color. Any darkened areas indicate that your oven is too hot. Lower your oven temperature by 10ºF and repeat test.
Premo! Sculpey is an artist's dream come true! Premo! Sculpey is firmer than Sculpey III, and extremely durable when baked. After kneading, Premo! Sculpey is soft enough to blend easily, but firm enough to hold fine detail and apply special techniques. Because Premo! Sculpey retains flexibility, the finished product remains very strong and durable. This unique characteristic makes it the most durable clay and is ideal for jewelry, home decor, and other decorative items.
Polymer clay is also a wonderful way to explore designs without risking your precious metal clay. Work out your designs in this clay before executing in metal clay. Bake and use as a mold. Use polymer clay to add brilliant color to your jewelry designs.
Premo Sculpey Polymer Clay - Fuchsia 2 oz block
Premo Sculpey Polymer Clay - Fuchsia 2 oz block
very good clay for making custom forms, dies, and models for working with metal clay
Basic Instructions:
Start with clean hands and work surface. Recommended work surfaces include Cool Tools Clayboard, glass surfaces, disposable foil, or wax paper. For best results, work light colors before dark colors to avoid staining clay. Condition clay by kneading until soft and smooth. When connecting two pieces of clay together, press firmly to ensure they stick together after baking. See baking times below. Do not use microwave oven. Do not exceed the recommended baking temperature or baking time.
Baking Times:
Premo! Sculpey bakes to hardness in the oven at 275°F (130°C) for 30 minutes per 1/4" (6 mm) thickness. It requires no painting.
Changing the Consistency of Clay:
Sculpey clays have the unique ability to be made as firm or as soft as you like. To make your clay softer, simply add a few drops of Sculpey Mold Maker™ until desired consistency is reached. To make your clay more firm, roll your clay into a sheet. Sandwich your flat clay between 8-10 sheets of plain white copy paper. Place a weight on top of your clay (a phone book works great) and allow to sit for 1-24 hours, checking periodically.
Pre-Baking Test:
Home oven temperatures may vary significantly depending on your oven, affecting the baking of your clay. To test the temperature of your oven prior to baking, pinch off a small ball of clay. Shape a disc about a 1/2" in diameter, approximately a 1/4" thick. Fire at appropriate temperature. Remove from oven and check color. Any darkened areas indicate that your oven is too hot. Lower your oven temperature by 10ºF and repeat test.
Premo! Sculpey is an artist's dream come true! Premo! Sculpey is firmer than Sculpey III, and extremely durable when baked. After kneading, Premo! Sculpey is soft enough to blend easily, but firm enough to hold fine detail and apply special techniques. Because Premo! Sculpey retains flexibility, the finished product remains very strong and durable. This unique characteristic makes it the most durable clay and is ideal for jewelry, home decor, and other decorative items.
Polymer clay is also a wonderful way to explore designs without risking your precious metal clay. Work out your designs in this clay before executing in metal clay. Bake and use as a mold. Use polymer clay to add brilliant color to your jewelry designs.
Premo Sculpey Polymer Clay - Turquoise 2 oz block
Premo Sculpey Polymer Clay - Turquoise 2 oz block
very good clay for making custom forms, dies, and models for working with metal clay
Basic Instructions:
Start with clean hands and work surface. Recommended work surfaces include Cool Tools Clayboard, glass surfaces, disposable foil, or wax paper. For best results, work light colors before dark colors to avoid staining clay. Condition clay by kneading until soft and smooth. When connecting two pieces of clay together, press firmly to ensure they stick together after baking. See baking times below. Do not use microwave oven. Do not exceed the recommended baking temperature or baking time.
Baking Times:
Premo! Sculpey bakes to hardness in the oven at 275°F (130°C) for 30 minutes per 1/4" (6 mm) thickness. It requires no painting.
Changing the Consistency of Clay:
Sculpey clays have the unique ability to be made as firm or as soft as you like. To make your clay softer, simply add a few drops of Sculpey Mold Maker™ until desired consistency is reached. To make your clay more firm, roll your clay into a sheet. Sandwich your flat clay between 8-10 sheets of plain white copy paper. Place a weight on top of your clay (a phone book works great) and allow to sit for 1-24 hours, checking periodically.
Pre-Baking Test:
Home oven temperatures may vary significantly depending on your oven, affecting the baking of your clay. To test the temperature of your oven prior to baking, pinch off a small ball of clay. Shape a disc about a 1/2" in diameter, approximately a 1/4" thick. Fire at appropriate temperature. Remove from oven and check color. Any darkened areas indicate that your oven is too hot. Lower your oven temperature by 10ºF and repeat test.
Premo! Sculpey is an artist's dream come true! Premo! Sculpey is firmer than Sculpey III, and extremely durable when baked. After kneading, Premo! Sculpey is soft enough to blend easily, but firm enough to hold fine detail and apply special techniques. Because Premo! Sculpey retains flexibility, the finished product remains very strong and durable. This unique characteristic makes it the most durable clay and is ideal for jewelry, home decor, and other decorative items.
Polymer clay is also a wonderful way to explore designs without risking your precious metal clay. Work out your designs in this clay before executing in metal clay. Bake and use as a mold. Use polymer clay to add brilliant color to your jewelry designs.
Premo Sculpey Polymer Clay - Purple 2 oz block
Premo Sculpey Polymer Clay - Purple 2 oz block
very good clay for making custom forms, dies, and models for working with metal clay
Basic Instructions:
Start with clean hands and work surface. Recommended work surfaces include Cool Tools Clayboard, glass surfaces, disposable foil, or wax paper. For best results, work light colors before dark colors to avoid staining clay. Condition clay by kneading until soft and smooth. When connecting two pieces of clay together, press firmly to ensure they stick together after baking. See baking times below. Do not use microwave oven. Do not exceed the recommended baking temperature or baking time.
Baking Times:
Premo! Sculpey bakes to hardness in the oven at 275°F (130°C) for 30 minutes per 1/4" (6 mm) thickness. It requires no painting.
Changing the Consistency of Clay:
Sculpey clays have the unique ability to be made as firm or as soft as you like. To make your clay softer, simply add a few drops of Sculpey Mold Maker™ until desired consistency is reached. To make your clay more firm, roll your clay into a sheet. Sandwich your flat clay between 8-10 sheets of plain white copy paper. Place a weight on top of your clay (a phone book works great) and allow to sit for 1-24 hours, checking periodically.
Pre-Baking Test:
Home oven temperatures may vary significantly depending on your oven, affecting the baking of your clay. To test the temperature of your oven prior to baking, pinch off a small ball of clay. Shape a disc about a 1/2" in diameter, approximately a 1/4" thick. Fire at appropriate temperature. Remove from oven and check color. Any darkened areas indicate that your oven is too hot. Lower your oven temperature by 10ºF and repeat test.
Premo! Sculpey is an artist's dream come true! Premo! Sculpey is firmer than Sculpey III, and extremely durable when baked. After kneading, Premo! Sculpey is soft enough to blend easily, but firm enough to hold fine detail and apply special techniques. Because Premo! Sculpey retains flexibility, the finished product remains very strong and durable. This unique characteristic makes it the most durable clay and is ideal for jewelry, home decor, and other decorative items.
Polymer clay is also a wonderful way to explore designs without risking your precious metal clay. Work out your designs in this clay before executing in metal clay. Bake and use as a mold. Use polymer clay to add brilliant color to your jewelry designs.
Premo Sculpey Polymer Clay - Rhino Gray 2 oz block
Premo Sculpey Polymer Clay - Rhino Gray 2 oz block
very good clay for making custom forms, dies, and models for working with metal clay
Basic Instructions:
Start with clean hands and work surface. Recommended work surfaces include Cool Tools Clayboard, glass surfaces, disposable foil, or wax paper. For best results, work light colors before dark colors to avoid staining clay. Condition clay by kneading until soft and smooth. When connecting two pieces of clay together, press firmly to ensure they stick together after baking. See baking times below. Do not use microwave oven. Do not exceed the recommended baking temperature or baking time.
Baking Times:
Premo! Sculpey bakes to hardness in the oven at 275°F (130°C) for 30 minutes per 1/4" (6 mm) thickness. It requires no painting.
Changing the Consistency of Clay:
Sculpey clays have the unique ability to be made as firm or as soft as you like. To make your clay softer, simply add a few drops of Sculpey Mold Maker™ until desired consistency is reached. To make your clay more firm, roll your clay into a sheet. Sandwich your flat clay between 8-10 sheets of plain white copy paper. Place a weight on top of your clay (a phone book works great) and allow to sit for 1-24 hours, checking periodically.
Pre-Baking Test:
Home oven temperatures may vary significantly depending on your oven, affecting the baking of your clay. To test the temperature of your oven prior to baking, pinch off a small ball of clay. Shape a disc about a 1/2" in diameter, approximately a 1/4" thick. Fire at appropriate temperature. Remove from oven and check color. Any darkened areas indicate that your oven is too hot. Lower your oven temperature by 10ºF and repeat test.
Premo! Sculpey is an artist's dream come true! Premo! Sculpey is firmer than Sculpey III, and extremely durable when baked. After kneading, Premo! Sculpey is soft enough to blend easily, but firm enough to hold fine detail and apply special techniques. Because Premo! Sculpey retains flexibility, the finished product remains very strong and durable. This unique characteristic makes it the most durable clay and is ideal for jewelry, home decor, and other decorative items.
Polymer clay is also a wonderful way to explore designs without risking your precious metal clay. Work out your designs in this clay before executing in metal clay. Bake and use as a mold. Use polymer clay to add brilliant color to your jewelry designs.
Premo Accent Sculpey Polymer Clay - Pearl 2 oz block
Premo Accent Sculpey Polymer Clay - Pearl 2 oz block
very good clay for making custom forms, dies, and models for working with metal clay
Basic Instructions:
Start with clean hands and work surface. Recommended work surfaces include Cool Tools Clayboard, glass surfaces, disposable foil, or wax paper. For best results, work light colors before dark colors to avoid staining clay. Condition clay by kneading until soft and smooth. When connecting two pieces of clay together, press firmly to ensure they stick together after baking. See baking times below. Do not use microwave oven. Do not exceed the recommended baking temperature or baking time.
Baking Times:
Premo! Sculpey Accents bake to hardness in the oven at 275°F (130°C) for 30 minutes per 1/4" (6 mm) thickness. It requires no painting.
Changing the Consistency of Clay:
Sculpey clays have the unique ability to be made as firm or as soft as you like. To make your clay softer, simply add a few drops of Sculpey Mold Maker™ until desired consistency is reached. To make your clay more firm, roll your clay into a sheet. Sandwich your flat clay between 8-10 sheets of plain white copy paper. Place a weight on top of your clay (a phone book works great) and allow to sit for 1-24 hours, checking periodically.
Pre-Baking Test:
Home oven temperatures may vary significantly depending on your oven, affecting the baking of your clay. To test the temperature of your oven prior to baking, pinch off a small ball of clay. Shape a disc about a 1/2" in diameter, approximately a 1/4" thick. Fire at appropriate temperature. Remove from oven and check color. Any darkened areas indicate that your oven is too hot. Lower your oven temperature by 10ºF and repeat test.
The same great polymer clay as Premo! but these enhanced accent clays allow for making exciting and unique projects! Available in Glitter, Granite, Metallics, Translucents, and Pearls, these Premo! Sculpey Accent clays can be used alone or with other Premo! clays to create beautiful and unique projects.
Polymer clay is also a wonderful way to explore designs without risking your precious metal clay. Work out your designs in this clay before executing in metal clay. Bake and use as a mold. Use Polymer clay to add brilliant colors to your jewelry designs.
Premo Accent Sculpey Polymer Clay - Magenta Pearl 2 oz block
Premo Accent Sculpey Polymer Clay - Magenta Pearl 2 oz block
very good clay for making custom forms, dies, and models for working with metal clay
Basic Instructions:
Start with clean hands and work surface. Recommended work surfaces include Cool Tools Clayboard, glass surfaces, disposable foil, or wax paper. For best results, work light colors before dark colors to avoid staining clay. Condition clay by kneading until soft and smooth. When connecting two pieces of clay together, press firmly to ensure they stick together after baking. See baking times below. Do not use microwave oven. Do not exceed the recommended baking temperature or baking time.
Baking Times:
Premo! Sculpey Accents bake to hardness in the oven at 275°F (130°C) for 30 minutes per 1/4" (6 mm) thickness. It requires no painting.
Changing the Consistency of Clay:
Sculpey clays have the unique ability to be made as firm or as soft as you like. To make your clay softer, simply add a few drops of Sculpey Mold Maker™ until desired consistency is reached. To make your clay more firm, roll your clay into a sheet. Sandwich your flat clay between 8-10 sheets of plain white copy paper. Place a weight on top of your clay (a phone book works great) and allow to sit for 1-24 hours, checking periodically.
Pre-Baking Test:
Home oven temperatures may vary significantly depending on your oven, affecting the baking of your clay. To test the temperature of your oven prior to baking, pinch off a small ball of clay. Shape a disc about a 1/2" in diameter, approximately a 1/4" thick. Fire at appropriate temperature. Remove from oven and check color. Any darkened areas indicate that your oven is too hot. Lower your oven temperature by 10ºF and repeat test.
The same great polymer clay as Premo! but these enhanced accent clays allow for making exciting and unique projects! Available in Glitter, Granite, Metallics, Translucents, and Pearls, these Premo! Sculpey Accent clays can be used alone or with other Premo! clays to create beautiful and unique projects.
Polymer clay is also a wonderful way to explore designs without risking your precious metal clay. Work out your designs in this clay before executing in metal clay. Bake and use as a mold. Use Polymer clay to add brilliant colors to your jewelry designs.
Premo Accent Sculpey Polymer Clay - Purple Pearl 2 oz block
Premo Accent Sculpey Polymer Clay - Purple Pearl 2 oz block
very good clay for making custom forms, dies, and models for working with metal clay
Basic Instructions:
Start with clean hands and work surface. Recommended work surfaces include Cool Tools Clayboard, glass surfaces, disposable foil, or wax paper. For best results, work light colors before dark colors to avoid staining clay. Condition clay by kneading until soft and smooth. When connecting two pieces of clay together, press firmly to ensure they stick together after baking. See baking times below. Do not use microwave oven. Do not exceed the recommended baking temperature or baking time.
Baking Times:
Premo! Sculpey Accents bake to hardness in the oven at 275°F (130°C) for 30 minutes per 1/4" (6 mm) thickness. It requires no painting.
Changing the Consistency of Clay:
Sculpey clays have the unique ability to be made as firm or as soft as you like. To make your clay softer, simply add a few drops of Sculpey Mold Maker™ until desired consistency is reached. To make your clay more firm, roll your clay into a sheet. Sandwich your flat clay between 8-10 sheets of plain white copy paper. Place a weight on top of your clay (a phone book works great) and allow to sit for 1-24 hours, checking periodically.
Pre-Baking Test:
Home oven temperatures may vary significantly depending on your oven, affecting the baking of your clay. To test the temperature of your oven prior to baking, pinch off a small ball of clay. Shape a disc about a 1/2" in diameter, approximately a 1/4" thick. Fire at appropriate temperature. Remove from oven and check color. Any darkened areas indicate that your oven is too hot. Lower your oven temperature by 10ºF and repeat test.
The same great polymer clay as Premo! but these enhanced accent clays allow for making exciting and unique projects! Available in Glitter, Granite, Metallics, Translucents, and Pearls, these Premo! Sculpey Accent clays can be used alone or with other Premo! clays to create beautiful and unique projects.
Polymer clay is also a wonderful way to explore designs without risking your precious metal clay. Work out your designs in this clay before executing in metal clay. Bake and use as a mold. Use Polymer clay to add brilliant colors to your jewelry designs.
Premo Accent Sculpey Polymer Clay - Bright Green Pearl 2 oz block
Premo Accent Sculpey Polymer Clay - Bright Green Pearl 2 oz block
very good clay for making custom forms, dies, and models for working with metal clay
Basic Instructions:
Start with clean hands and work surface. Recommended work surfaces include Cool Tools Clayboard, glass surfaces, disposable foil, or wax paper. For best results, work light colors before dark colors to avoid staining clay. Condition clay by kneading until soft and smooth. When connecting two pieces of clay together, press firmly to ensure they stick together after baking. See baking times below. Do not use microwave oven. Do not exceed the recommended baking temperature or baking time.
Baking Times:
Premo! Sculpey Accents bake to hardness in the oven at 275°F (130°C) for 30 minutes per 1/4" (6 mm) thickness. It requires no painting.
Changing the Consistency of Clay:
Sculpey clays have the unique ability to be made as firm or as soft as you like. To make your clay softer, simply add a few drops of Sculpey Mold Maker™ until desired consistency is reached. To make your clay more firm, roll your clay into a sheet. Sandwich your flat clay between 8-10 sheets of plain white copy paper. Place a weight on top of your clay (a phone book works great) and allow to sit for 1-24 hours, checking periodically.
Pre-Baking Test:
Home oven temperatures may vary significantly depending on your oven, affecting the baking of your clay. To test the temperature of your oven prior to baking, pinch off a small ball of clay. Shape a disc about a 1/2" in diameter, approximately a 1/4" thick. Fire at appropriate temperature. Remove from oven and check color. Any darkened areas indicate that your oven is too hot. Lower your oven temperature by 10ºF and repeat test.
The same great polymer clay as Premo! but these enhanced accent clays allow for making exciting and unique projects! Available in Glitter, Granite, Metallics, Translucents, and Pearls, these Premo! Sculpey Accent clays can be used alone or with other Premo! clays to create beautiful and unique projects.
Polymer clay is also a wonderful way to explore designs without risking your precious metal clay. Work out your designs in this clay before executing in metal clay. Bake and use as a mold. Use Polymer clay to add brilliant colors to your jewelry designs.
Premo Accent Sculpey Polymer Clay - Peacock Pearl 2 oz block
Premo Accent Sculpey Polymer Clay - Peacock Pearl 2 oz block
very good clay for making custom forms, dies, and models for working with metal clay
Basic Instructions:
Start with clean hands and work surface. Recommended work surfaces include Cool Tools Clayboard, glass surfaces, disposable foil, or wax paper. For best results, work light colors before dark colors to avoid staining clay. Condition clay by kneading until soft and smooth. When connecting two pieces of clay together, press firmly to ensure they stick together after baking. See baking times below. Do not use microwave oven. Do not exceed the recommended baking temperature or baking time.
Baking Times:
Premo! Sculpey Accents bake to hardness in the oven at 275°F (130°C) for 30 minutes per 1/4" (6 mm) thickness. It requires no painting.
Changing the Consistency of Clay:
Sculpey clays have the unique ability to be made as firm or as soft as you like. To make your clay softer, simply add a few drops of Sculpey Mold Maker™ until desired consistency is reached. To make your clay more firm, roll your clay into a sheet. Sandwich your flat clay between 8-10 sheets of plain white copy paper. Place a weight on top of your clay (a phone book works great) and allow to sit for 1-24 hours, checking periodically.
Pre-Baking Test:
Home oven temperatures may vary significantly depending on your oven, affecting the baking of your clay. To test the temperature of your oven prior to baking, pinch off a small ball of clay. Shape a disc about a 1/2" in diameter, approximately a 1/4" thick. Fire at appropriate temperature. Remove from oven and check color. Any darkened areas indicate that your oven is too hot. Lower your oven temperature by 10ºF and repeat test.
The same great polymer clay as Premo! but these enhanced accent clays allow for making exciting and unique projects! Available in Glitter, Granite, Metallics, Translucents, and Pearls, these Premo! Sculpey Accent clays can be used alone or with other Premo! clays to create beautiful and unique projects.
Polymer clay is also a wonderful way to explore designs without risking your precious metal clay. Work out your designs in this clay before executing in metal clay. Bake and use as a mold. Use Polymer clay to add brilliant colors to your jewelry designs.
Premo Accent Sculpey Polymer Clay - Gold 2 oz block
Premo Accent Sculpey Polymer Clay - Gold 2 oz block
very good clay for making custom forms, dies, and models for working with metal clay
Basic Instructions:
Start with clean hands and work surface. Recommended work surfaces include Cool Tools Clayboard, glass surfaces, disposable foil, or wax paper. For best results, work light colors before dark colors to avoid staining clay. Condition clay by kneading until soft and smooth. When connecting two pieces of clay together, press firmly to ensure they stick together after baking. See baking times below. Do not use microwave oven. Do not exceed the recommended baking temperature or baking time.
Baking Times:
Premo! Sculpey Accents bake to hardness in the oven at 275°F (130°C) for 30 minutes per 1/4" (6 mm) thickness. It requires no painting.
Changing the Consistency of Clay:
Sculpey clays have the unique ability to be made as firm or as soft as you like. To make your clay softer, simply add a few drops of Sculpey Mold Maker™ until desired consistency is reached. To make your clay more firm, roll your clay into a sheet. Sandwich your flat clay between 8-10 sheets of plain white copy paper. Place a weight on top of your clay (a phone book works great) and allow to sit for 1-24 hours, checking periodically.
Pre-Baking Test:
Home oven temperatures may vary significantly depending on your oven, affecting the baking of your clay. To test the temperature of your oven prior to baking, pinch off a small ball of clay. Shape a disc about a 1/2" in diameter, approximately a 1/4" thick. Fire at appropriate temperature. Remove from oven and check color. Any darkened areas indicate that your oven is too hot. Lower your oven temperature by 10ºF and repeat test.
The same great polymer clay as Premo! but these enhanced accent clays allow for making exciting and unique projects! Available in Glitter, Granite, Metallics, Translucents, and Pearls, these Premo! Sculpey Accent clays can be used alone or with other Premo! clays to create beautiful and unique projects.
Polymer clay is also a wonderful way to explore designs without risking your precious metal clay. Work out your designs in this clay before executing in metal clay. Bake and use as a mold. Use Polymer clay to add brilliant colors to your jewelry designs.
Premo Accent Sculpey Polymer Clay - Silver 2 oz block
Premo Accent Sculpey Polymer Clay - Silver 2 oz block
p>A very good clay for making custom forms, dies, and models for working with metal clay.
Basic Instructions:Start with clean hands and work surface. Recommended work surfaces include Cool Tools Clayboard, glass surfaces, disposable foil, or wax paper. For best results, work light colors before dark colors to avoid staining clay. Condition clay by kneading until soft and smooth. When connecting two pieces of clay together, press firmly to ensure they stick together after baking. See baking times below. Do not use microwave oven. Do not exceed the recommended baking temperature or baking time.
Baking Times:Premo! Sculpey Accents bake to hardness in the oven at 275°F (130°C) for 30 minutes per 1/4" (6 mm) thickness. It requires no painting.
Changing the Consistency of Clay:Sculpey clays have the unique ability to be made as firm or as soft as you like. To make your clay softer, simply add a few drops of Sculpey Mold Maker™ until desired consistency is reached. To make your clay more firm, roll your clay into a sheet. Sandwich your flat clay between 8-10 sheets of plain white copy paper. Place a weight on top of your clay (a phone book works great) and allow to sit for 1-24 hours, checking periodically.
Pre-Baking Test:Home oven temperatures may vary significantly depending on your oven, affecting the baking of your clay. To test the temperature of your oven prior to baking, pinch off a small ball of clay. Shape a disc about a 1/2" in diameter, approximately a 1/4" thick. Fire at appropriate temperature. Remove from oven and check color. Any darkened areas indicate that your oven is too hot. Lower your oven temperature by 10ºF and repeat test.
The same great polymer clay as Premo! but these enhanced accent clays allow for making exciting and unique projects! Available in Glitter, Granite, Metallics, Translucents, and Pearls, these Premo! Sculpey Accent clays can be used alone or with other Premo! clays to create beautiful and unique projects.
Polymer clay is also a wonderful way to explore designs without risking your precious metal clay. Work out your designs in this clay before executing in metal clay. Bake and use as a mold. Use Polymer clay to add brilliant colors to your jewelry designs.
Premo Accent Sculpey Polymer Clay - Copper 2 oz block
Premo Accent Sculpey Polymer Clay - Copper 2 oz block
very good clay for making custom forms, dies, and models for working with metal clay
Basic Instructions:
Start with clean hands and work surface. Recommended work surfaces include Cool Tools Clayboard, glass surfaces, disposable foil, or wax paper. For best results, work light colors before dark colors to avoid staining clay. Condition clay by kneading until soft and smooth. When connecting two pieces of clay together, press firmly to ensure they stick together after baking. See baking times below. Do not use microwave oven. Do not exceed the recommended baking temperature or baking time.
Baking Times:
Premo! Sculpey Accents bake to hardness in the oven at 275°F (130°C) for 30 minutes per 1/4" (6 mm) thickness. It requires no painting.
Changing the Consistency of Clay:
Sculpey clays have the unique ability to be made as firm or as soft as you like. To make your clay softer, simply add a few drops of Sculpey Mold Maker™ until desired consistency is reached. To make your clay more firm, roll your clay into a sheet. Sandwich your flat clay between 8-10 sheets of plain white copy paper. Place a weight on top of your clay (a phone book works great) and allow to sit for 1-24 hours, checking periodically.
Pre-Baking Test:
Home oven temperatures may vary significantly depending on your oven, affecting the baking of your clay. To test the temperature of your oven prior to baking, pinch off a small ball of clay. Shape a disc about a 1/2" in diameter, approximately a 1/4" thick. Fire at appropriate temperature. Remove from oven and check color. Any darkened areas indicate that your oven is too hot. Lower your oven temperature by 10ºF and repeat test.
The same great polymer clay as Premo! but these enhanced accent clays allow for making exciting and unique projects! Available in Glitter, Granite, Metallics, Translucents, and Pearls, these Premo! Sculpey Accent clays can be used alone or with other Premo! clays to create beautiful and unique projects.
Polymer clay is also a wonderful way to explore designs without risking your precious metal clay. Work out your designs in this clay before executing in metal clay. Bake and use as a mold. Use Polymer clay to add brilliant colors to your jewelry designs.
Premo Accent Sculpey Polymer Clay - Bronze 2 oz block
Premo Accent Sculpey Polymer Clay - Bronze 2 oz block
p>A very good clay for making custom forms, dies, and models for working with metal clay.
Basic Instructions:Start with clean hands and work surface. Recommended work surfaces include Cool Tools Clayboard, glass surfaces, disposable foil, or wax paper. For best results, work light colors before dark colors to avoid staining clay. Condition clay by kneading until soft and smooth. When connecting two pieces of clay together, press firmly to ensure they stick together after baking. See baking times below. Do not use microwave oven. Do not exceed the recommended baking temperature or baking time.
Baking Times:Premo! Sculpey Accents bake to hardness in the oven at 275°F (130°C) for 30 minutes per 1/4" (6 mm) thickness. It requires no painting.
Changing the Consistency of Clay:Sculpey clays have the unique ability to be made as firm or as soft as you like. To make your clay softer, simply add a few drops of Sculpey Mold Maker™ until desired consistency is reached. To make your clay more firm, roll your clay into a sheet. Sandwich your flat clay between 8-10 sheets of plain white copy paper. Place a weight on top of your clay (a phone book works great) and allow to sit for 1-24 hours, checking periodically.
Pre-Baking Test:Home oven temperatures may vary significantly depending on your oven, affecting the baking of your clay. To test the temperature of your oven prior to baking, pinch off a small ball of clay. Shape a disc about a 1/2" in diameter, approximately a 1/4" thick. Fire at appropriate temperature. Remove from oven and check color. Any darkened areas indicate that your oven is too hot. Lower your oven temperature by 10ºF and repeat test.
The same great polymer clay as Premo! but these enhanced accent clays allow for making exciting and unique projects! Available in Glitter, Granite, Metallics, Translucents, and Pearls, these Premo! Sculpey Accent clays can be used alone or with other Premo! clays to create beautiful and unique projects.
Polymer clay is also a wonderful way to explore designs without risking your precious metal clay. Work out your designs in this clay before executing in metal clay. Bake and use as a mold. Use Polymer clay to add brilliant colors to your jewelry designs.
Premo Accent Sculpey Polymer Clay - Translucent 2 oz block
Premo Accent Sculpey Polymer Clay - Translucent 2 oz block
very good clay for making custom forms, dies, and models for working with metal clay
Basic Instructions:
Start with clean hands and work surface. Recommended work surfaces include Cool Tools Clayboard, glass surfaces, disposable foil, or wax paper. For best results, work light colors before dark colors to avoid staining clay. Condition clay by kneading until soft and smooth. When connecting two pieces of clay together, press firmly to ensure they stick together after baking. See baking times below. Do not use microwave oven. Do not exceed the recommended baking temperature or baking time.
Baking Times:
Premo! Sculpey Accents bake to hardness in the oven at 275°F (130°C) for 30 minutes per 1/4" (6 mm) thickness. It requires no painting.
Changing the Consistency of Clay:
Sculpey clays have the unique ability to be made as firm or as soft as you like. To make your clay softer, simply add a few drops of Sculpey Mold Maker™ until desired consistency is reached. To make your clay more firm, roll your clay into a sheet. Sandwich your flat clay between 8-10 sheets of plain white copy paper. Place a weight on top of your clay (a phone book works great) and allow to sit for 1-24 hours, checking periodically.
Pre-Baking Test:
Home oven temperatures may vary significantly depending on your oven, affecting the baking of your clay. To test the temperature of your oven prior to baking, pinch off a small ball of clay. Shape a disc about a 1/2" in diameter, approximately a 1/4" thick. Fire at appropriate temperature. Remove from oven and check color. Any darkened areas indicate that your oven is too hot. Lower your oven temperature by 10ºF and repeat test.
The same great polymer clay as Premo! but these enhanced accent clays allow for making exciting and unique projects! Available in Glitter, Granite, Metallics, Translucents, and Pearls, these Premo! Sculpey Accent clays can be used alone or with other Premo! clays to create beautiful and unique projects.
Polymer clay is also a wonderful way to explore designs without risking your precious metal clay. Work out your designs in this clay before executing in metal clay. Bake and use as a mold. Use Polymer clay to add brilliant colors to your jewelry designs.
Premo Accent Sculpey Polymer Clay - Frost White Glitter 2 oz block
Premo Accent Sculpey Polymer Clay - Frost White Glitter 2 oz block
very good clay for making custom forms, dies, and models for working with metal clay
Basic Instructions:
Start with clean hands and work surface. Recommended work surfaces include Cool Tools Clayboard, glass surfaces, disposable foil, or wax paper. For best results, work light colors before dark colors to avoid staining clay. Condition clay by kneading until soft and smooth. When connecting two pieces of clay together, press firmly to ensure they stick together after baking. See baking times below. Do not use microwave oven. Do not exceed the recommended baking temperature or baking time.
Baking Times:
Premo! Sculpey Accents bake to hardness in the oven at 275°F (130°C) for 30 minutes per 1/4" (6 mm) thickness. It requires no painting.
Changing the Consistency of Clay:
Sculpey clays have the unique ability to be made as firm or as soft as you like. To make your clay softer, simply add a few drops of Sculpey Mold Maker™ until desired consistency is reached. To make your clay more firm, roll your clay into a sheet. Sandwich your flat clay between 8-10 sheets of plain white copy paper. Place a weight on top of your clay (a phone book works great) and allow to sit for 1-24 hours, checking periodically.
Pre-Baking Test:
Home oven temperatures may vary significantly depending on your oven, affecting the baking of your clay. To test the temperature of your oven prior to baking, pinch off a small ball of clay. Shape a disc about a 1/2" in diameter, approximately a 1/4" thick. Fire at appropriate temperature. Remove from oven and check color. Any darkened areas indicate that your oven is too hot. Lower your oven temperature by 10ºF and repeat test.
The same great polymer clay as Premo! but these enhanced accent clays allow for making exciting and unique projects! Available in Glitter, Granite, Metallics, Translucents, and Pearls, these Premo! Sculpey Accent clays can be used alone or with other Premo! clays to create beautiful and unique projects.
Polymer clay is also a wonderful way to explore designs without risking your precious metal clay. Work out your designs in this clay before executing in metal clay. Bake and use as a mold. Use Polymer clay to add brilliant colors to your jewelry designs.
Premo Accent Sculpey Polymer Clay - 18K Gold 2 oz block
Premo Accent Sculpey Polymer Clay - 18K Gold 2 oz block
very good clay for making custom forms, dies, and models for working with metal clay
Basic Instructions:
Start with clean hands and work surface. Recommended work surfaces include Cool Tools Clayboard, glass surfaces, disposable foil, or wax paper. For best results, work light colors before dark colors to avoid staining clay. Condition clay by kneading until soft and smooth. When connecting two pieces of clay together, press firmly to ensure they stick together after baking. See baking times below. Do not use microwave oven. Do not exceed the recommended baking temperature or baking time.
Baking Times:
Premo! Sculpey Accents bake to hardness in the oven at 275°F (130°C) for 30 minutes per 1/4" (6 mm) thickness. It requires no painting.
Changing the Consistency of Clay:
Sculpey clays have the unique ability to be made as firm or as soft as you like. To make your clay softer, simply add a few drops of Sculpey Mold Maker™ until desired consistency is reached. To make your clay more firm, roll your clay into a sheet. Sandwich your flat clay between 8-10 sheets of plain white copy paper. Place a weight on top of your clay (a phone book works great) and allow to sit for 1-24 hours, checking periodically.
Pre-Baking Test:
Home oven temperatures may vary significantly depending on your oven, affecting the baking of your clay. To test the temperature of your oven prior to baking, pinch off a small ball of clay. Shape a disc about a 1/2" in diameter, approximately a 1/4" thick. Fire at appropriate temperature. Remove from oven and check color. Any darkened areas indicate that your oven is too hot. Lower your oven temperature by 10ºF and repeat test.
The same great polymer clay as Premo! but these enhanced accent clays allow for making exciting and unique projects! Available in Glitter, Granite, Metallics, Translucents, and Pearls, these Premo! Sculpey Accent clays can be used alone or with other Premo! clays to create beautiful and unique projects.
Polymer clay is also a wonderful way to explore designs without risking your precious metal clay. Work out your designs in this clay before executing in metal clay. Bake and use as a mold. Use Polymer clay to add brilliant colors to your jewelry designs.
Premo Accent Sculpey Polymer Clay - Antique Gold 2 oz block
Premo Accent Sculpey Polymer Clay - Antique Gold 2 oz block
very good clay for making custom forms, dies, and models for working with metal clay
Basic Instructions:
Start with clean hands and work surface. Recommended work surfaces include Cool Tools Clayboard, glass surfaces, disposable foil, or wax paper. For best results, work light colors before dark colors to avoid staining clay. Condition clay by kneading until soft and smooth. When connecting two pieces of clay together, press firmly to ensure they stick together after baking. See baking times below. Do not use microwave oven. Do not exceed the recommended baking temperature or baking time.
Baking Times:
Premo! Sculpey Accents bake to hardness in the oven at 275°F (130°C) for 30 minutes per 1/4" (6 mm) thickness. It requires no painting.
Changing the Consistency of Clay:
Sculpey clays have the unique ability to be made as firm or as soft as you like. To make your clay softer, simply add a few drops of Sculpey Mold Maker™ until desired consistency is reached. To make your clay more firm, roll your clay into a sheet. Sandwich your flat clay between 8-10 sheets of plain white copy paper. Place a weight on top of your clay (a phone book works great) and allow to sit for 1-24 hours, checking periodically.
Pre-Baking Test:
Home oven temperatures may vary significantly depending on your oven, affecting the baking of your clay. To test the temperature of your oven prior to baking, pinch off a small ball of clay. Shape a disc about a 1/2" in diameter, approximately a 1/4" thick. Fire at appropriate temperature. Remove from oven and check color. Any darkened areas indicate that your oven is too hot. Lower your oven temperature by 10ºF and repeat test.
The same great polymer clay as Premo! but these enhanced accent clays allow for making exciting and unique projects! Available in Glitter, Granite, Metallics, Translucents, and Pearls, these Premo! Sculpey Accent clays can be used alone or with other Premo! clays to create beautiful and unique projects.
Polymer clay is also a wonderful way to explore designs without risking your precious metal clay. Work out your designs in this clay before executing in metal clay. Bake and use as a mold. Use Polymer clay to add brilliant colors to your jewelry designs.
Premo Sculpey Polymer Clay - Zinc Yellow 2 oz block
Premo Sculpey Polymer Clay - Zinc Yellow 2 oz block
very good clay for making custom forms, dies, and models for working with metal clay
Basic Instructions:
Start with clean hands and work surface. Recommended work surfaces include Cool Tools Clayboard, glass surfaces, disposable foil, or wax paper. For best results, work light colors before dark colors to avoid staining clay. Condition clay by kneading until soft and smooth. When connecting two pieces of clay together, press firmly to ensure they stick together after baking. See baking times below. Do not use microwave oven. Do not exceed the recommended baking temperature or baking time.
Baking Times:
Premo! Sculpey Accents bake to hardness in the oven at 275°F (130°C) for 30 minutes per 1/4" (6 mm) thickness. It requires no painting.
Changing the Consistency of Clay:
Sculpey clays have the unique ability to be made as firm or as soft as you like. To make your clay softer, simply add a few drops of Sculpey Mold Maker™ until desired consistency is reached. To make your clay more firm, roll your clay into a sheet. Sandwich your flat clay between 8-10 sheets of plain white copy paper. Place a weight on top of your clay (a phone book works great) and allow to sit for 1-24 hours, checking periodically.
Pre-Baking Test:
Home oven temperatures may vary significantly depending on your oven, affecting the baking of your clay. To test the temperature of your oven prior to baking, pinch off a small ball of clay. Shape a disc about a 1/2" in diameter, approximately a 1/4" thick. Fire at appropriate temperature. Remove from oven and check color. Any darkened areas indicate that your oven is too hot. Lower your oven temperature by 10ºF and repeat test.
Premo! Sculpey is an artist's dream come true! Premo! Sculpey is firmer than Scupley III, and extremely durable when baked. After kneading, Premo! Scupley is soft enough to blend easily, but firm enough to hold fine detail and apply special techniques. Because Premo! Scupley retains flexibility, the finished product remains very strong and durable. This unique characteristic makes it the most durable clay and is ideal for jewelry, home decor, and other decorative items.
Polymer clay is also a wonderful way to explore designs without risking your precious metal clay. Work out your designs in this clay before executing in metal clay. Bake and use as a mold. Use polymer clay to add brilliant color to your jewelry designs.
Sculpey Souffle Polymer Clay - Poppy Seed 2 oz block
Sculpey Souffle Polymer Clay - Poppy Seed 2 oz block
very good clay for making custom forms, dies, and models for working with metal clay
Basic Instructions:
Start with clean hands and work surface. Recommended work surfaces include Cool Tools Clayboard, glass surfaces, disposable foil, or wax paper. For best results, work light colors before dark colors to avoid staining clay. Condition clay by kneading until soft and smooth. When connecting two pieces of clay together, press firmly to ensure they stick together after baking. See baking times below. Do not use microwave oven. Do not exceed the recommended baking temperature or baking time.
Baking Times:
Sculpey Souffel bakes to hardness in the oven at 275°F (130°C) for 30 minutes per 1/4" (6 mm) thickness. It requires no painting.
Changing the Consistency of Clay:
Sculpey clays have the unique ability to be made as firm or as soft as you like. To make your clay softer, simply add a few drops of Sculpey Mold Maker™ until desired consistency is reached. To make your clay more firm, roll your clay into a sheet. Sandwich your flat clay between 8-10 sheets of plain white copy paper. Place a weight on top of your clay (a phone book works great) and allow to sit for 1-24 hours, checking periodically.
Pre-Baking Test:
Home oven temperatures may vary significantly depending on your oven, affecting the baking of your clay. To test the temperature of your oven prior to baking, pinch off a small ball of clay. Shape a disc about a 1/2" in diameter, approximately a 1/4" thick. Fire at appropriate temperature. Remove from oven and check color. Any darkened areas indicate that your oven is too hot. Lower your oven temperature by 10ºF and repeat test.
Experience a different kind of polymer clay. Souffle is an innovative lightweight clay perfect for jewelry making! Its strength and ability to hold detail makes it an excellent clay for advanced techniques such as mokume gane, bargello and caning. It is strong and self supporting and doesn’t crack in large pieces which makes it great for larger clay projects as well. Beautiful suede finish when baked. Comes in 22 fashion forward colors.
Polymer clay is also a wonderful way to explore designs without risking your precious metal clay. Work out your designs in this clay before executing in metal clay. Bake and use as a mold. Use polymer clay to add brilliant color to your jewelry designs.
Sculpey Souffle Polymer Clay - Pistachio 2 oz block
Sculpey Souffle Polymer Clay - Pistachio 2 oz block
very good clay for making custom forms, dies, and models for working with metal clay
Basic Instructions:
Start with clean hands and work surface. Recommended work surfaces include Cool Tools Clayboard, glass surfaces, disposable foil, or wax paper. For best results, work light colors before dark colors to avoid staining clay. Condition clay by kneading until soft and smooth. When connecting two pieces of clay together, press firmly to ensure they stick together after baking. See baking times below. Do not use microwave oven. Do not exceed the recommended baking temperature or baking time.
Baking Times:
Sculpey Souffel bakes to hardness in the oven at 275°F (130°C) for 30 minutes per 1/4" (6 mm) thickness. It requires no painting.
Changing the Consistency of Clay:
Sculpey clays have the unique ability to be made as firm or as soft as you like. To make your clay softer, simply add a few drops of Sculpey Mold Maker™ until desired consistency is reached. To make your clay more firm, roll your clay into a sheet. Sandwich your flat clay between 8-10 sheets of plain white copy paper. Place a weight on top of your clay (a phone book works great) and allow to sit for 1-24 hours, checking periodically.
Pre-Baking Test:
Home oven temperatures may vary significantly depending on your oven, affecting the baking of your clay. To test the temperature of your oven prior to baking, pinch off a small ball of clay. Shape a disc about a 1/2" in diameter, approximately a 1/4" thick. Fire at appropriate temperature. Remove from oven and check color. Any darkened areas indicate that your oven is too hot. Lower your oven temperature by 10ºF and repeat test.
Experience a different kind of polymer clay. Souffle is an innovative lightweight clay perfect for jewelry making! Its strength and ability to hold detail makes it an excellent clay for advanced techniques such as mokume gane, bargello and caning. It is strong and self supporting and doesn’t crack in large pieces which makes it great for larger clay projects as well. Beautiful suede finish when baked. Comes in 22 fashion forward colors.
Polymer clay is also a wonderful way to explore designs without risking your precious metal clay. Work out your designs in this clay before executing in metal clay. Bake and use as a mold. Use polymer clay to add brilliant color to your jewelry designs.
Sculpey Souffle Polymer Clay - Cherry Pie 2 oz block
Sculpey Souffle Polymer Clay - Cherry Pie 2 oz block
very good clay for making custom forms, dies, and models for working with metal clay
Basic Instructions:
Start with clean hands and work surface. Recommended work surfaces include Cool Tools Clayboard, glass surfaces, disposable foil, or wax paper. For best results, work light colors before dark colors to avoid staining clay. Condition clay by kneading until soft and smooth. When connecting two pieces of clay together, press firmly to ensure they stick together after baking. See baking times below. Do not use microwave oven. Do not exceed the recommended baking temperature or baking time.
Baking Times:
Sculpey Souffel bakes to hardness in the oven at 275°F (130°C) for 30 minutes per 1/4" (6 mm) thickness. It requires no painting.
Changing the Consistency of Clay:
Sculpey clays have the unique ability to be made as firm or as soft as you like. To make your clay softer, simply add a few drops of Sculpey Mold Maker™ until desired consistency is reached. To make your clay more firm, roll your clay into a sheet. Sandwich your flat clay between 8-10 sheets of plain white copy paper. Place a weight on top of your clay (a phone book works great) and allow to sit for 1-24 hours, checking periodically.
Pre-Baking Test:
Home oven temperatures may vary significantly depending on your oven, affecting the baking of your clay. To test the temperature of your oven prior to baking, pinch off a small ball of clay. Shape a disc about a 1/2" in diameter, approximately a 1/4" thick. Fire at appropriate temperature. Remove from oven and check color. Any darkened areas indicate that your oven is too hot. Lower your oven temperature by 10ºF and repeat test.
Sculpey Souffle Polymer Clay - Igloo 2 oz block
Sculpey Souffle Polymer Clay - Igloo 2 oz block
very good clay for making custom forms, dies, and models for working with metal clay
Basic Instructions:
Start with clean hands and work surface. Recommended work surfaces include Cool Tools Clayboard, glass surfaces, disposable foil, or wax paper. For best results, work light colors before dark colors to avoid staining clay. Condition clay by kneading until soft and smooth. When connecting two pieces of clay together, press firmly to ensure they stick together after baking. See baking times below. Do not use microwave oven. Do not exceed the recommended baking temperature or baking time.
Baking Times:
Sculpey Souffel bakes to hardness in the oven at 275°F (130°C) for 30 minutes per 1/4" (6 mm) thickness. It requires no painting.
Changing the Consistency of Clay:
Sculpey clays have the unique ability to be made as firm or as soft as you like. To make your clay softer, simply add a few drops of Sculpey Mold Maker™ until desired consistency is reached. To make your clay more firm, roll your clay into a sheet. Sandwich your flat clay between 8-10 sheets of plain white copy paper. Place a weight on top of your clay (a phone book works great) and allow to sit for 1-24 hours, checking periodically.
Pre-Baking Test:
Home oven temperatures may vary significantly depending on your oven, affecting the baking of your clay. To test the temperature of your oven prior to baking, pinch off a small ball of clay. Shape a disc about a 1/2" in diameter, approximately a 1/4" thick. Fire at appropriate temperature. Remove from oven and check color. Any darkened areas indicate that your oven is too hot. Lower your oven temperature by 10ºF and repeat test.
Experience a different kind of polymer clay. Souffle is an innovative lightweight clay perfect for jewelry making! Its strength and ability to hold detail makes it an excellent clay for advanced techniques such as mokume gane, bargello and caning. It is strong and self supporting and doesn’t crack in large pieces which makes it great for larger clay projects as well. Beautiful suede finish when baked. Comes in 22 fashion forward colors.
Polymer clay is also a wonderful way to explore designs without risking your precious metal clay. Work out your designs in this clay before executing in metal clay. Bake and use as a mold. Use polymer clay to add brilliant color to your jewelry designs.
Sculpey Souffle Polymer Clay - Bluestone 2 oz block
Sculpey Souffle Polymer Clay - Bluestone 2 oz block
very good clay for making custom forms, dies, and models for working with metal clay
Basic Instructions:
Start with clean hands and work surface. Recommended work surfaces include Cool Tools Clayboard, glass surfaces, disposable foil, or wax paper. For best results, work light colors before dark colors to avoid staining clay. Condition clay by kneading until soft and smooth. When connecting two pieces of clay together, press firmly to ensure they stick together after baking. See baking times below. Do not use microwave oven. Do not exceed the recommended baking temperature or baking time.
Baking Times:
Sculpey Souffel bakes to hardness in the oven at 275°F (130°C) for 30 minutes per 1/4" (6 mm) thickness. It requires no painting.
Changing the Consistency of Clay:
Sculpey clays have the unique ability to be made as firm or as soft as you like. To make your clay softer, simply add a few drops of Sculpey Mold Maker™ until desired consistency is reached. To make your clay more firm, roll your clay into a sheet. Sandwich your flat clay between 8-10 sheets of plain white copy paper. Place a weight on top of your clay (a phone book works great) and allow to sit for 1-24 hours, checking periodically.
Pre-Baking Test:
Home oven temperatures may vary significantly depending on your oven, affecting the baking of your clay. To test the temperature of your oven prior to baking, pinch off a small ball of clay. Shape a disc about a 1/2" in diameter, approximately a 1/4" thick. Fire at appropriate temperature. Remove from oven and check color. Any darkened areas indicate that your oven is too hot. Lower your oven temperature by 10ºF and repeat test.
Experience a different kind of polymer clay. Souffle is an innovative lightweight clay perfect for jewelry making! Its strength and ability to hold detail makes it an excellent clay for advanced techniques such as mokume gane, bargello and caning. It is strong and self supporting and doesn’t crack in large pieces which makes it great for larger clay projects as well. Beautiful suede finish when baked. Comes in 22 fashion forward colors.
Polymer clay is also a wonderful way to explore designs without risking your precious metal clay. Work out your designs in this clay before executing in metal clay. Bake and use as a mold. Use polymer clay to add brilliant color to your jewelry designs.
Sculpey Souffle Polymer Clay - Latte 2 oz block
Sculpey Souffle Polymer Clay - Latte 2 oz block
very good clay for making custom forms, dies, and models for working with metal clay
Basic Instructions:
Start with clean hands and work surface. Recommended work surfaces include Cool Tools Clayboard, glass surfaces, disposable foil, or wax paper. For best results, work light colors before dark colors to avoid staining clay. Condition clay by kneading until soft and smooth. When connecting two pieces of clay together, press firmly to ensure they stick together after baking. See baking times below. Do not use microwave oven. Do not exceed the recommended baking temperature or baking time.
Baking Times:
Sculpey Souffel bakes to hardness in the oven at 275°F (130°C) for 30 minutes per 1/4" (6 mm) thickness. It requires no painting.
Changing the Consistency of Clay:
Sculpey clays have the unique ability to be made as firm or as soft as you like. To make your clay softer, simply add a few drops of Sculpey Mold Maker™ until desired consistency is reached. To make your clay more firm, roll your clay into a sheet. Sandwich your flat clay between 8-10 sheets of plain white copy paper. Place a weight on top of your clay (a phone book works great) and allow to sit for 1-24 hours, checking periodically.
Pre-Baking Test:
Home oven temperatures may vary significantly depending on your oven, affecting the baking of your clay. To test the temperature of your oven prior to baking, pinch off a small ball of clay. Shape a disc about a 1/2" in diameter, approximately a 1/4" thick. Fire at appropriate temperature. Remove from oven and check color. Any darkened areas indicate that your oven is too hot. Lower your oven temperature by 10ºF and repeat test.
Experience a different kind of polymer clay. Souffle is an innovative lightweight clay perfect for jewelry making! Its strength and ability to hold detail makes it an excellent clay for advanced techniques such as mokume gane, bargello and caning. It is strong and self supporting and doesn’t crack in large pieces which makes it great for larger clay projects as well. Beautiful suede finish when baked. Comes in 22 fashion forward colors.
Polymer clay is also a wonderful way to explore designs without risking your precious metal clay. Work out your designs in this clay before executing in metal clay. Bake and use as a mold. Use polymer clay to add brilliant color to your jewelry designs.
Sculpey Souffle Polymer Clay - Sea Glass 2 oz block
Sculpey Souffle Polymer Clay - Sea Glass 2 oz block
very good clay for making custom forms, dies, and models for working with metal clay
Basic Instructions:
Start with clean hands and work surface. Recommended work surfaces include Cool Tools Clayboard, glass surfaces, disposable foil, or wax paper. For best results, work light colors before dark colors to avoid staining clay. Condition clay by kneading until soft and smooth. When connecting two pieces of clay together, press firmly to ensure they stick together after baking. See baking times below. Do not use microwave oven. Do not exceed the recommended baking temperature or baking time.
Baking Times:
Sculpey Souffel bakes to hardness in the oven at 275°F (130°C) for 30 minutes per 1/4" (6 mm) thickness. It requires no painting.
Changing the Consistency of Clay:
Sculpey clays have the unique ability to be made as firm or as soft as you like. To make your clay softer, simply add a few drops of Sculpey Mold Maker™ until desired consistency is reached. To make your clay more firm, roll your clay into a sheet. Sandwich your flat clay between 8-10 sheets of plain white copy paper. Place a weight on top of your clay (a phone book works great) and allow to sit for 1-24 hours, checking periodically.
Pre-Baking Test:
Home oven temperatures may vary significantly depending on your oven, affecting the baking of your clay. To test the temperature of your oven prior to baking, pinch off a small ball of clay. Shape a disc about a 1/2" in diameter, approximately a 1/4" thick. Fire at appropriate temperature. Remove from oven and check color. Any darkened areas indicate that your oven is too hot. Lower your oven temperature by 10ºF and repeat test.
Experience a different kind of polymer clay. Souffle is an innovative lightweight clay perfect for jewelry making! Its strength and ability to hold detail makes it an excellent clay for advanced techniques such as mokume gane, bargello and caning. It is strong and self supporting and doesn’t crack in large pieces which makes it great for larger clay projects as well. Beautiful suede finish when baked. Comes in 22 fashion forward colors.
Polymer clay is also a wonderful way to explore designs without risking your precious metal clay. Work out your designs in this clay before executing in metal clay. Bake and use as a mold. Use polymer clay to add brilliant color to your jewelry designs.
Sculpey Souffle Polymer Clay - Concrete 2 oz block
Sculpey Souffle Polymer Clay - Concrete 2 oz block
very good clay for making custom forms, dies, and models for working with metal clay
Basic Instructions:
Start with clean hands and work surface. Recommended work surfaces include Cool Tools Clayboard, glass surfaces, disposable foil, or wax paper. For best results, work light colors before dark colors to avoid staining clay. Condition clay by kneading until soft and smooth. When connecting two pieces of clay together, press firmly to ensure they stick together after baking. See baking times below. Do not use microwave oven. Do not exceed the recommended baking temperature or baking time.
Baking Times:
Sculpey Souffel bakes to hardness in the oven at 275°F (130°C) for 30 minutes per 1/4" (6 mm) thickness. It requires no painting.
Changing the Consistency of Clay:
Sculpey clays have the unique ability to be made as firm or as soft as you like. To make your clay softer, simply add a few drops of Sculpey Mold Maker™ until desired consistency is reached. To make your clay more firm, roll your clay into a sheet. Sandwich your flat clay between 8-10 sheets of plain white copy paper. Place a weight on top of your clay (a phone book works great) and allow to sit for 1-24 hours, checking periodically.
Pre-Baking Test:
Home oven temperatures may vary significantly depending on your oven, affecting the baking of your clay. To test the temperature of your oven prior to baking, pinch off a small ball of clay. Shape a disc about a 1/2" in diameter, approximately a 1/4" thick. Fire at appropriate temperature. Remove from oven and check color. Any darkened areas indicate that your oven is too hot. Lower your oven temperature by 10ºF and repeat test.
Experience a different kind of polymer clay. Souffle is an innovative lightweight clay perfect for jewelry making! Its strength and ability to hold detail makes it an excellent clay for advanced techniques such as mokume gane, bargello and caning. It is strong and self supporting and doesn’t crack in large pieces which makes it great for larger clay projects as well. Beautiful suede finish when baked. Comes in 22 fashion forward colors.
Polymer clay is also a wonderful way to explore designs without risking your precious metal clay. Work out your designs in this clay before executing in metal clay. Bake and use as a mold. Use polymer clay to add brilliant color to your jewelry designs.
Premo Sculpey Polymer Clay - Alizarin Crimson Hue 2 oz Block
Premo Sculpey Polymer Clay - Alizarin Crimson Hue
p>A very good clay for making custom forms, dies, and models for working with metal clay.
Basic Instructions:Start with clean hands and work surface. Recommended work surfaces include Cool Tools Clayboard, glass surfaces, disposable foil, or wax paper. For best results, work light colors before dark colors to avoid staining clay. Condition clay by kneading until soft and smooth. When connecting two pieces of clay together, press firmly to ensure they stick together after baking. See baking times below. Do not use microwave oven. Do not exceed the recommended baking temperature or baking time.
Baking Times:Premo! Sculpey bakes to hardness in the oven at 275°F (130°C) for 30 minutes per 1/4" (6 mm) thickness. It requires no painting.
Changing the Consistency of Clay:Sculpey clays have the unique ability to be made as firm or as soft as you like. To make your clay softer, simply add a few drops of Sculpey Mold Maker™ until desired consistency is reached. To make your clay more firm, roll your clay into a sheet. Sandwich your flat clay between 8-10 sheets of plain white copy paper. Place a weight on top of your clay (a phone book works great) and allow to sit for 1-24 hours, checking periodically.
Pre-Baking Test:Home oven temperatures may vary significantly depending on your oven, affecting the baking of your clay. To test the temperature of your oven prior to baking, pinch off a small ball of clay. Shape a disc about a 1/2" in diameter, approximately a 1/4" thick. Fire at appropriate temperature. Remove from oven and check color. Any darkened areas indicate that your oven is too hot. Lower your oven temperature by 10ºF and repeat test.
Premo! Sculpey is an artist's dream come true! Premo! Sculpey is firmer than Sculpey III, and extremely durable when baked. After kneading, Premo! Sculpey is soft enough to blend easily, but firm enough to hold fine detail and apply special techniques. Because Premo! Sculpey retains flexibility, the finished product remains very strong and durable. This unique characteristic makes it the most durable clay and is ideal for jewelry, home decor, and other decorative items.
Polymer clay is also a wonderful way to explore designs without risking your precious metal clay. Work out your designs in this clay before executing in metal clay. Bake and use as a mold. Use polymer clay to add brilliant color to your jewelry designs.
Premo Accent Sculpey Polymer Clay - Fluorescent Pink 2 oz block
Premo Accent Sculpey Polymer Clay - Fluorescent Pink
p>A very good clay for making custom forms, dies, and models for working with metal clay.
Basic Instructions:Start with clean hands and work surface. Recommended work surfaces include Cool Tools Clayboard, glass surfaces, disposable foil, or wax paper. For best results, work light colors before dark colors to avoid staining clay. Condition clay by kneading until soft and smooth. When connecting two pieces of clay together, press firmly to ensure they stick together after baking. See baking times below. Do not use microwave oven. Do not exceed the recommended baking temperature or baking time.
Baking Times:Premo! Sculpey Accents bake to hardness in the oven at 275°F (130°C) for 30 minutes per 1/4" (6 mm) thickness. It requires no painting.
Changing the Consistency of Clay:Sculpey clays have the unique ability to be made as firm or as soft as you like. To make your clay softer, simply add a few drops of Sculpey Mold Maker™ until desired consistency is reached. To make your clay more firm, roll your clay into a sheet. Sandwich your flat clay between 8-10 sheets of plain white copy paper. Place a weight on top of your clay (a phone book works great) and allow to sit for 1-24 hours, checking periodically.
Pre-Baking Test:Home oven temperatures may vary significantly depending on your oven, affecting the baking of your clay. To test the temperature of your oven prior to baking, pinch off a small ball of clay. Shape a disc about a 1/2" in diameter, approximately a 1/4" thick. Fire at appropriate temperature. Remove from oven and check color. Any darkened areas indicate that your oven is too hot. Lower your oven temperature by 10ºF and repeat test.
The same great polymer clay as Premo! but these enhanced accent clays allow for making exciting and unique projects! Available in Glitter, Granite, Metallics, Translucents, and Pearls, these Premo! Sculpey Accent clays can be used alone or with other Premo! clays to create beautiful and unique projects.
Polymer clay is also a wonderful way to explore designs without risking your precious metal clay. Work out your designs in this clay before executing in metal clay. Bake and use as a mold. Use Polymer clay to add brilliant colors to your jewelry designs.
Premo Accent Sculpey Polymer Clay - Graphite Pearl 2 oz block
Premo Accent Sculpey Polymer Clay - Graphite Pearl
p>
A very good clay for making custom forms, dies, and models for working with metal clay.
Basic Instructions:Start with clean hands and work surface. Recommended work surfaces include Cool Tools Clayboard, glass surfaces, disposable foil, or wax paper. For best results, work light colors before dark colors to avoid staining clay. Condition clay by kneading until soft and smooth. When connecting two pieces of clay together, press firmly to ensure they stick together after baking. See baking times below. Do not use microwave oven. Do not exceed the recommended baking temperature or baking time.
Baking Times:Premo! Sculpey Accents bake to hardness in the oven at 275°F (130°C) for 30 minutes per 1/4" (6 mm) thickness. It requires no painting.
Changing the Consistency of Clay:Sculpey clays have the unique ability to be made as firm or as soft as you like. To make your clay softer, simply add a few drops of Sculpey Mold Maker™ until desired consistency is reached. To make your clay more firm, roll your clay into a sheet. Sandwich your flat clay between 8-10 sheets of plain white copy paper. Place a weight on top of your clay (a phone book works great) and allow to sit for 1-24 hours, checking periodically.
Pre-Baking Test:Home oven temperatures may vary significantly depending on your oven, affecting the baking of your clay. To test the temperature of your oven prior to baking, pinch off a small ball of clay. Shape a disc about a 1/2" in diameter, approximately a 1/4" thick. Fire at appropriate temperature. Remove from oven and check color. Any darkened areas indicate that your oven is too hot. Lower your oven temperature by 10ºF and repeat test.
The same great polymer clay as Premo! but these enhanced accent clays allow for making exciting and unique projects! Available in Glitter, Granite, Metallics, Translucents, and Pearls, these Premo! Sculpey Accent clays can be used alone or with other Premo! clays to create beautiful and unique projects.
Polymer clay is also a wonderful way to explore designs without risking your precious metal clay. Work out your designs in this clay before executing in metal clay. Bake and use as a mold. Use Polymer clay to add brilliant colors to your jewelry designs.
Premo Sculpey Polymer Clay - Jungle 2 oz Block
Premo Sculpey Polymer Clay - Jungle
p>
A very good clay for making custom forms, dies, and models for working with metal clay.
Basic Instructions:Start with clean hands and work surface. Recommended work surfaces include Cool Tools Clayboard, glass surfaces, disposable foil, or wax paper. For best results, work light colors before dark colors to avoid staining clay. Condition clay by kneading until soft and smooth. When connecting two pieces of clay together, press firmly to ensure they stick together after baking. See baking times below. Do not use microwave oven. Do not exceed the recommended baking temperature or baking time.
Baking Times:Premo! Sculpey bakes to hardness in the oven at 275°F (130°C) for 30 minutes per 1/4" (6 mm) thickness. It requires no painting.
Changing the Consistency of Clay:Sculpey clays have the unique ability to be made as firm or as soft as you like. To make your clay softer, simply add a few drops of Sculpey Mold Maker™ until desired consistency is reached. To make your clay more firm, roll your clay into a sheet. Sandwich your flat clay between 8-10 sheets of plain white copy paper. Place a weight on top of your clay (a phone book works great) and allow to sit for 1-24 hours, checking periodically.
Pre-Baking Test:Home oven temperatures may vary significantly depending on your oven, affecting the baking of your clay. To test the temperature of your oven prior to baking, pinch off a small ball of clay. Shape a disc about a 1/2" in diameter, approximately a 1/4" thick. Fire at appropriate temperature. Remove from oven and check color. Any darkened areas indicate that your oven is too hot. Lower your oven temperature by 10ºF and repeat test.
Premo! Sculpey is an artist's dream come true! Premo! Sculpey is firmer than Sculpey III, and extremely durable when baked. After kneading, Premo! Sculpey is soft enough to blend easily, but firm enough to hold fine detail and apply special techniques. Because Premo! Sculpey retains flexibility, the finished product remains very strong and durable. This unique characteristic makes it the most durable clay and is ideal for jewelry, home decor, and other decorative items.
Polymer clay is also a wonderful way to explore designs without risking your precious metal clay. Work out your designs in this clay before executing in metal clay. Bake and use as a mold. Use polymer clay to add brilliant color to your jewelry designs.
Premo Accent Sculpey Polymer Clay - Opal 2 oz block
Premo Accent Sculpey Polymer Clay - Opal
p>
A very good clay for making custom forms, dies, and models for working with metal clay.
Basic Instructions:Start with clean hands and work surface. Recommended work surfaces include Cool Tools Clayboard, glass surfaces, disposable foil, or wax paper. For best results, work light colors before dark colors to avoid staining clay. Condition clay by kneading until soft and smooth. When connecting two pieces of clay together, press firmly to ensure they stick together after baking. See baking times below. Do not use microwave oven. Do not exceed the recommended baking temperature or baking time.
Baking Times:Premo! Sculpey Accents bake to hardness in the oven at 275°F (130°C) for 30 minutes per 1/4" (6 mm) thickness. It requires no painting.
Changing the Consistency of Clay:Sculpey clays have the unique ability to be made as firm or as soft as you like. To make your clay softer, simply add a few drops of Sculpey Mold Maker™ until desired consistency is reached. To make your clay more firm, roll your clay into a sheet. Sandwich your flat clay between 8-10 sheets of plain white copy paper. Place a weight on top of your clay (a phone book works great) and allow to sit for 1-24 hours, checking periodically.
Pre-Baking Test:Home oven temperatures may vary significantly depending on your oven, affecting the baking of your clay. To test the temperature of your oven prior to baking, pinch off a small ball of clay. Shape a disc about a 1/2" in diameter, approximately a 1/4" thick. Fire at appropriate temperature. Remove from oven and check color. Any darkened areas indicate that your oven is too hot. Lower your oven temperature by 10ºF and repeat test.
The same great polymer clay as Premo! but these enhanced accent clays allow for making exciting and unique projects! Available in Glitter, Granite, Metallics, Translucents, and Pearls, these Premo! Sculpey Accent clays can be used alone or with other Premo! clays to create beautiful and unique projects.
Polymer clay is also a wonderful way to explore designs without risking your precious metal clay. Work out your designs in this clay before executing in metal clay. Bake and use as a mold. Use Polymer clay to add brilliant colors to your jewelry designs.
Premo Sculpey Polymer Clay - Periwinkle 2 oz Block
Premo Sculpey Polymer Clay - Periwinkle
p>
A very good clay for making custom forms, dies, and models for working with metal clay.
Basic Instructions:Start with clean hands and work surface. Recommended work surfaces include Cool Tools Clayboard, glass surfaces, disposable foil, or wax paper. For best results, work light colors before dark colors to avoid staining clay. Condition clay by kneading until soft and smooth. When connecting two pieces of clay together, press firmly to ensure they stick together after baking. See baking times below. Do not use microwave oven. Do not exceed the recommended baking temperature or baking time.
Baking Times:Premo! Sculpey bakes to hardness in the oven at 275°F (130°C) for 30 minutes per 1/4" (6 mm) thickness. It requires no painting.
Changing the Consistency of Clay:Sculpey clays have the unique ability to be made as firm or as soft as you like. To make your clay softer, simply add a few drops of Sculpey Mold Maker™ until desired consistency is reached. To make your clay more firm, roll your clay into a sheet. Sandwich your flat clay between 8-10 sheets of plain white copy paper. Place a weight on top of your clay (a phone book works great) and allow to sit for 1-24 hours, checking periodically.
Pre-Baking Test:Home oven temperatures may vary significantly depending on your oven, affecting the baking of your clay. To test the temperature of your oven prior to baking, pinch off a small ball of clay. Shape a disc about a 1/2" in diameter, approximately a 1/4" thick. Fire at appropriate temperature. Remove from oven and check color. Any darkened areas indicate that your oven is too hot. Lower your oven temperature by 10ºF and repeat test.
Premo! Sculpey is an artist's dream come true! Premo! Sculpey is firmer than Sculpey III, and extremely durable when baked. After kneading, Premo! Sculpey is soft enough to blend easily, but firm enough to hold fine detail and apply special techniques. Because Premo! Sculpey retains flexibility, the finished product remains very strong and durable. This unique characteristic makes it the most durable clay and is ideal for jewelry, home decor, and other decorative items.
Polymer clay is also a wonderful way to explore designs without risking your precious metal clay. Work out your designs in this clay before executing in metal clay. Bake and use as a mold. Use polymer clay to add brilliant color to your jewelry designs.
Premo Accent Sculpey Polymer Clay - Rose Gold Glitter 2 oz block
Premo Accent Sculpey Polymer Clay - Rose Gold Glitter
p>
A very good clay for making custom forms, dies, and models for working with metal clay.
Basic Instructions:Start with clean hands and work surface. Recommended work surfaces include Cool Tools Clayboard, glass surfaces, disposable foil, or wax paper. For best results, work light colors before dark colors to avoid staining clay. Condition clay by kneading until soft and smooth. When connecting two pieces of clay together, press firmly to ensure they stick together after baking. See baking times below. Do not use microwave oven. Do not exceed the recommended baking temperature or baking time.
Baking Times:Premo! Sculpey Accents bake to hardness in the oven at 275°F (130°C) for 30 minutes per 1/4" (6 mm) thickness. It requires no painting.
Changing the Consistency of Clay:Sculpey clays have the unique ability to be made as firm or as soft as you like. To make your clay softer, simply add a few drops of Sculpey Mold Maker™ until desired consistency is reached. To make your clay more firm, roll your clay into a sheet. Sandwich your flat clay between 8-10 sheets of plain white copy paper. Place a weight on top of your clay (a phone book works great) and allow to sit for 1-24 hours, checking periodically.
Pre-Baking Test:Home oven temperatures may vary significantly depending on your oven, affecting the baking of your clay. To test the temperature of your oven prior to baking, pinch off a small ball of clay. Shape a disc about a 1/2" in diameter, approximately a 1/4" thick. Fire at appropriate temperature. Remove from oven and check color. Any darkened areas indicate that your oven is too hot. Lower your oven temperature by 10ºF and repeat test.
The same great polymer clay as Premo! but these enhanced accent clays allow for making exciting and unique projects! Available in Glitter, Granite, Metallics, Translucents, and Pearls, these Premo! Sculpey Accent clays can be used alone or with other Premo! clays to create beautiful and unique projects.
Polymer clay is also a wonderful way to explore designs without risking your precious metal clay. Work out your designs in this clay before executing in metal clay. Bake and use as a mold. Use Polymer clay to add brilliant colors to your jewelry designs.
Premo Accent Sculpey Polymer Clay - Sunset Pearl 2 oz block
Premo Accent Sculpey Polymer Clay - Sunset Pearl
p>
A very good clay for making custom forms, dies, and models for working with metal clay.
Basic Instructions:
Start with clean hands and work surface. Recommended work surfaces include Cool Tools Clayboard, glass surfaces, disposable foil, or wax paper. For best results, work light colors before dark colors to avoid staining clay. Condition clay by kneading until soft and smooth. When connecting two pieces of clay together, press firmly to ensure they stick together after baking. See baking times below. Do not use microwave oven. Do not exceed the recommended baking temperature or baking time.
Baking Times:Premo! Sculpey Accents bake to hardness in the oven at 275°F (130°C) for 30 minutes per 1/4" (6 mm) thickness. It requires no painting.
Changing the Consistency of Clay:Sculpey clays have the unique ability to be made as firm or as soft as you like. To make your clay softer, simply add a few drops of Sculpey Mold Maker™ until desired consistency is reached. To make your clay more firm, roll your clay into a sheet. Sandwich your flat clay between 8-10 sheets of plain white copy paper. Place a weight on top of your clay (a phone book works great) and allow to sit for 1-24 hours, checking periodically.
Pre-Baking Test:Home oven temperatures may vary significantly depending on your oven, affecting the baking of your clay. To test the temperature of your oven prior to baking, pinch off a small ball of clay. Shape a disc about a 1/2" in diameter, approximately a 1/4" thick. Fire at appropriate temperature. Remove from oven and check color. Any darkened areas indicate that your oven is too hot. Lower your oven temperature by 10ºF and repeat test.
The same great polymer clay as Premo! but these enhanced accent clays allow for making exciting and unique projects! Available in Glitter, Granite, Metallics, Translucents, and Pearls, these Premo! Sculpey Accent clays can be used alone or with other Premo! clays to create beautiful and unique projects.
Polymer clay is also a wonderful way to explore designs without risking your precious metal clay. Work out your designs in this clay before executing in metal clay. Bake and use as a mold. Use Polymer clay to add brilliant colors to your jewelry designs.
Premo Accent Sculpey Polymer Clay - Twinkle Twinkle 2 oz block
Premo Accent Sculpey Polymer Clay - Twinkle Twinkle
p>
A very good clay for making custom forms, dies, and models for working with metal clay.
Basic Instructions:Start with clean hands and work surface. Recommended work surfaces include Cool Tools Clayboard, glass surfaces, disposable foil, or wax paper. For best results, work light colors before dark colors to avoid staining clay. Condition clay by kneading until soft and smooth. When connecting two pieces of clay together, press firmly to ensure they stick together after baking. See baking times below. Do not use microwave oven. Do not exceed the recommended baking temperature or baking time.
Baking Times:Premo! Sculpey Accents bake to hardness in the oven at 275°F (130°C) for 30 minutes per 1/4" (6 mm) thickness. It requires no painting.
Changing the Consistency of Clay:Sculpey clays have the unique ability to be made as firm or as soft as you like. To make your clay softer, simply add a few drops of Sculpey Mold Maker™ until desired consistency is reached. To make your clay more firm, roll your clay into a sheet. Sandwich your flat clay between 8-10 sheets of plain white copy paper. Place a weight on top of your clay (a phone book works great) and allow to sit for 1-24 hours, checking periodically.
Pre-Baking Test:Home oven temperatures may vary significantly depending on your oven, affecting the baking of your clay. To test the temperature of your oven prior to baking, pinch off a small ball of clay. Shape a disc about a 1/2" in diameter, approximately a 1/4" thick. Fire at appropriate temperature. Remove from oven and check color. Any darkened areas indicate that your oven is too hot. Lower your oven temperature by 10ºF and repeat test.
The same great polymer clay as Premo! but these enhanced accent clays allow for making exciting and unique projects! Available in Glitter, Granite, Metallics, Translucents, and Pearls, these Premo! Sculpey Accent clays can be used alone or with other Premo! clays to create beautiful and unique projects.
Polymer clay is also a wonderful way to explore designs without risking your precious metal clay. Work out your designs in this clay before executing in metal clay. Bake and use as a mold. Use Polymer clay to add brilliant colors to your jewelry designs.
Premo Accent Sculpey Polymer Clay - Yellow Gold Glitter 2 oz block
Premo Accent Sculpey Polymer Clay - Yellow Gold Glitter
p>
A very good clay for making custom forms, dies, and models for working with metal clay.
Basic Instructions:Start with clean hands and work surface. Recommended work surfaces include Cool Tools Clayboard, glass surfaces, disposable foil, or wax paper. For best results, work light colors before dark colors to avoid staining clay. Condition clay by kneading until soft and smooth. When connecting two pieces of clay together, press firmly to ensure they stick together after baking. See baking times below. Do not use microwave oven. Do not exceed the recommended baking temperature or baking time.
Baking Times:Premo! Sculpey Accents bake to hardness in the oven at 275°F (130°C) for 30 minutes per 1/4" (6 mm) thickness. It requires no painting.
Changing the Consistency of Clay:Sculpey clays have the unique ability to be made as firm or as soft as you like. To make your clay softer, simply add a few drops of Sculpey Mold Maker™ until desired consistency is reached. To make your clay more firm, roll your clay into a sheet. Sandwich your flat clay between 8-10 sheets of plain white copy paper. Place a weight on top of your clay (a phone book works great) and allow to sit for 1-24 hours, checking periodically.
Pre-Baking Test:Home oven temperatures may vary significantly depending on your oven, affecting the baking of your clay. To test the temperature of your oven prior to baking, pinch off a small ball of clay. Shape a disc about a 1/2" in diameter, approximately a 1/4" thick. Fire at appropriate temperature. Remove from oven and check color. Any darkened areas indicate that your oven is too hot. Lower your oven temperature by 10ºF and repeat test.
The same great polymer clay as Premo! but these enhanced accent clays allow for making exciting and unique projects! Available in Glitter, Granite, Metallics, Translucents, and Pearls, these Premo! Sculpey Accent clays can be used alone or with other Premo! clays to create beautiful and unique projects.
Polymer clay is also a wonderful way to explore designs without risking your precious metal clay. Work out your designs in this clay before executing in metal clay. Bake and use as a mold. Use Polymer clay to add brilliant colors to your jewelry designs.
Premo Accent Sculpey Polymer Clay - White Gold Glitter 2 oz block
Premo Accent Sculpey Polymer Clay - White Gold Glitter 2 oz block
p>
A very good clay for making custom forms, dies, and models for working with metal clay.
Basic Instructions:Start with clean hands and work surface. Recommended work surfaces include Cool Tools Clayboard, glass surfaces, disposable foil, or wax paper. For best results, work light colors before dark colors to avoid staining clay. Condition clay by kneading until soft and smooth. When connecting two pieces of clay together, press firmly to ensure they stick together after baking. See baking times below. Do not use microwave oven. Do not exceed the recommended baking temperature or baking time.
Baking Times:Premo! Sculpey Accents bake to hardness in the oven at 275°F (130°C) for 30 minutes per 1/4" (6 mm) thickness. It requires no painting.
Changing the Consistency of Clay:Sculpey clays have the unique ability to be made as firm or as soft as you like. To make your clay softer, simply add a few drops of Sculpey Mold Maker™ until desired consistency is reached. To make your clay more firm, roll your clay into a sheet. Sandwich your flat clay between 8-10 sheets of plain white copy paper. Place a weight on top of your clay (a phone book works great) and allow to sit for 1-24 hours, checking periodically.
Pre-Baking Test:Home oven temperatures may vary significantly depending on your oven, affecting the baking of your clay. To test the temperature of your oven prior to baking, pinch off a small ball of clay. Shape a disc about a 1/2" in diameter, approximately a 1/4" thick. Fire at appropriate temperature. Remove from oven and check color. Any darkened areas indicate that your oven is too hot. Lower your oven temperature by 10ºF and repeat test.
The same great polymer clay as Premo! but these enhanced accent clays allow for making exciting and unique projects! Available in Glitter, Granite, Metallics, Translucents, and Pearls, these Premo! Sculpey Accent clays can be used alone or with other Premo! clays to create beautiful and unique projects.
Polymer clay is also a wonderful way to explore designs without risking your precious metal clay. Work out your designs in this clay before executing in metal clay. Bake and use as a mold. Use Polymer clay to add brilliant colors to your jewelry designs.
Sculpey Souffle Polymer Clay - Guava 2 oz block
Sculpey Souffle Polymer Clay - Guava 2 oz block
very good clay for making custom forms, dies, and models for working with metal clay
Basic Instructions:
Start with clean hands and work surface. Recommended work surfaces include Cool Tools Clayboard, glass surfaces, disposable foil, or wax paper. For best results, work light colors before dark colors to avoid staining clay. Condition clay by kneading until soft and smooth. When connecting two pieces of clay together, press firmly to ensure they stick together after baking. See baking times below. Do not use microwave oven. Do not exceed the recommended baking temperature or baking time.
Baking Times:
Sculpey Souffel bakes to hardness in the oven at 275°F (130°C) for 30 minutes per 1/4" (6 mm) thickness. It requires no painting.
Changing the Consistency of Clay:
Sculpey clays have the unique ability to be made as firm or as soft as you like. To make your clay softer, simply add a few drops of Sculpey Mold Maker™ until desired consistency is reached. To make your clay more firm, roll your clay into a sheet. Sandwich your flat clay between 8-10 sheets of plain white copy paper. Place a weight on top of your clay (a phone book works great) and allow to sit for 1-24 hours, checking periodically.
Pre-Baking Test:
Home oven temperatures may vary significantly depending on your oven, affecting the baking of your clay. To test the temperature of your oven prior to baking, pinch off a small ball of clay. Shape a disc about a 1/2" in diameter, approximately a 1/4" thick. Fire at appropriate temperature. Remove from oven and check color. Any darkened areas indicate that your oven is too hot. Lower your oven temperature by 10ºF and repeat test.
Experience a different kind of polymer clay. Souffle is an innovative lightweight clay perfect for jewelry making! Its strength and ability to hold detail makes it an excellent clay for advanced techniques such as mokume gane, bargello and caning. It is strong and self supporting and doesn’t crack in large pieces which makes it great for larger clay projects as well. Beautiful suede finish when baked. Comes in 22 fashion forward colors.
Polymer clay is also a wonderful way to explore designs without risking your precious metal clay. Work out your designs in this clay before executing in metal clay. Bake and use as a mold. Use polymer clay to add brilliant color to your jewelry designs.
Sculpey Souffle Polymer Clay - Mocha 2 oz block
Sculpey Souffle Polymer Clay - Mocha 2 oz block
very good clay for making custom forms, dies, and models for working with metal clay
Basic Instructions:
Start with clean hands and work surface. Recommended work surfaces include Cool Tools Clayboard, glass surfaces, disposable foil, or wax paper. For best results, work light colors before dark colors to avoid staining clay. Condition clay by kneading until soft and smooth. When connecting two pieces of clay together, press firmly to ensure they stick together after baking. See baking times below. Do not use microwave oven. Do not exceed the recommended baking temperature or baking time.
Baking Times:
Sculpey Souffel bakes to hardness in the oven at 275°F (130°C) for 30 minutes per 1/4" (6 mm) thickness. It requires no painting.
Changing the Consistency of Clay:
Sculpey clays have the unique ability to be made as firm or as soft as you like. To make your clay softer, simply add a few drops of Sculpey Mold Maker™ until desired consistency is reached. To make your clay more firm, roll your clay into a sheet. Sandwich your flat clay between 8-10 sheets of plain white copy paper. Place a weight on top of your clay (a phone book works great) and allow to sit for 1-24 hours, checking periodically.
Pre-Baking Test:
Home oven temperatures may vary significantly depending on your oven, affecting the baking of your clay. To test the temperature of your oven prior to baking, pinch off a small ball of clay. Shape a disc about a 1/2" in diameter, approximately a 1/4" thick. Fire at appropriate temperature. Remove from oven and check color. Any darkened areas indicate that your oven is too hot. Lower your oven temperature by 10ºF and repeat test.
Experience a different kind of polymer clay. Souffle is an innovative lightweight clay perfect for jewelry making! Its strength and ability to hold detail makes it an excellent clay for advanced techniques such as mokume gane, bargello and caning. It is strong and self supporting and doesn’t crack in large pieces which makes it great for larger clay projects as well. Beautiful suede finish when baked. Comes in 22 fashion forward colors.
Polymer clay is also a wonderful way to explore designs without risking your precious metal clay. Work out your designs in this clay before executing in metal clay. Bake and use as a mold. Use polymer clay to add brilliant color to your jewelry designs.
Sculpey Souffle Polymer Clay - Sage 2 oz block
Sculpey Souffle Polymer Clay - Sage 2 oz block
very good clay for making custom forms, dies, and models for working with metal clay
Basic Instructions:
Start with clean hands and work surface. Recommended work surfaces include Cool Tools Clayboard, glass surfaces, disposable foil, or wax paper. For best results, work light colors before dark colors to avoid staining clay. Condition clay by kneading until soft and smooth. When connecting two pieces of clay together, press firmly to ensure they stick together after baking. See baking times below. Do not use microwave oven. Do not exceed the recommended baking temperature or baking time.
Baking Times:
Sculpey Souffel bakes to hardness in the oven at 275°F (130°C) for 30 minutes per 1/4" (6 mm) thickness. It requires no painting.
Changing the Consistency of Clay:
Sculpey clays have the unique ability to be made as firm or as soft as you like. To make your clay softer, simply add a few drops of Sculpey Mold Maker™ until desired consistency is reached. To make your clay more firm, roll your clay into a sheet. Sandwich your flat clay between 8-10 sheets of plain white copy paper. Place a weight on top of your clay (a phone book works great) and allow to sit for 1-24 hours, checking periodically.
Pre-Baking Test:
Home oven temperatures may vary significantly depending on your oven, affecting the baking of your clay. To test the temperature of your oven prior to baking, pinch off a small ball of clay. Shape a disc about a 1/2" in diameter, approximately a 1/4" thick. Fire at appropriate temperature. Remove from oven and check color. Any darkened areas indicate that your oven is too hot. Lower your oven temperature by 10ºF and repeat test.
Experience a different kind of polymer clay. Souffle is an innovative lightweight clay perfect for jewelry making! Its strength and ability to hold detail makes it an excellent clay for advanced techniques such as mokume gane, bargello and caning. It is strong and self supporting and doesn’t crack in large pieces which makes it great for larger clay projects as well. Beautiful suede finish when baked. Comes in 22 fashion forward colors.
Polymer clay is also a wonderful way to explore designs without risking your precious metal clay. Work out your designs in this clay before executing in metal clay. Bake and use as a mold. Use polymer clay to add brilliant color to your jewelry designs.
Sculpey Souffle Polymer Clay - Cinnamon 2 oz block
Sculpey Souffle Polymer Clay - Cinnamon 2 oz block
very good clay for making custom forms, dies, and models for working with metal clay
Basic Instructions:
Start with clean hands and work surface. Recommended work surfaces include Cool Tools Clayboard, glass surfaces, disposable foil, or wax paper. For best results, work light colors before dark colors to avoid staining clay. Condition clay by kneading until soft and smooth. When connecting two pieces of clay together, press firmly to ensure they stick together after baking. See baking times below. Do not use microwave oven. Do not exceed the recommended baking temperature or baking time.
Baking Times:
Sculpey Souffel bakes to hardness in the oven at 275°F (130°C) for 30 minutes per 1/4" (6 mm) thickness. It requires no painting.
Changing the Consistency of Clay:
Sculpey clays have the unique ability to be made as firm or as soft as you like. To make your clay softer, simply add a few drops of Sculpey Mold Maker™ until desired consistency is reached. To make your clay more firm, roll your clay into a sheet. Sandwich your flat clay between 8-10 sheets of plain white copy paper. Place a weight on top of your clay (a phone book works great) and allow to sit for 1-24 hours, checking periodically.
Pre-Baking Test:
Home oven temperatures may vary significantly depending on your oven, affecting the baking of your clay. To test the temperature of your oven prior to baking, pinch off a small ball of clay. Shape a disc about a 1/2" in diameter, approximately a 1/4" thick. Fire at appropriate temperature. Remove from oven and check color. Any darkened areas indicate that your oven is too hot. Lower your oven temperature by 10ºF and repeat test.
Experience a different kind of polymer clay. Souffle is an innovative lightweight clay perfect for jewelry making! Its strength and ability to hold detail makes it an excellent clay for advanced techniques such as mokume gane, bargello and caning. It is strong and self supporting and doesn’t crack in large pieces which makes it great for larger clay projects as well. Beautiful suede finish when baked. Comes in 22 fashion forward colors.
Polymer clay is also a wonderful way to explore designs without risking your precious metal clay. Work out your designs in this clay before executing in metal clay. Bake and use as a mold. Use polymer clay to add brilliant color to your jewelry designs.
Clay Syringe
Clay Syringe
Empty syringe with plunger and twist-on cap/cover to use with your favorite metal clay. Add distilled water to metal clay and fill to make your own clay syringes. Syringe tips not included. Fits all standard luer lock tips.
Five Star Copper Clay - 50 gram - 3+ Pkgs
Five Star Copper Clay - 50 gram
The newest thing in copper and bronze metal clays!
Five Star Metal Clay has all of the features you desire in base metals:
Fires simply and fast
Ultra refined metal powders create a smooth finish
Easily carved and worked on cutting machines
All colors can be fired together
Comes in five great metals!
Five Star Copper can be fired with a torch or kiln fired in carbon. Kiln firing is 1700F for 30 minutes to an hour. Clay shrinks between 12-15% depending on firing schedule.
Five Star Bronze Clay - 50 gram - 3+ Pkgs
Five Star Bronze Clay - 50 gram
The newest thing in copper and bronze metal clays!
Five Star Metal Clay has all of the features you desire in base metals:
Fires simply and fast
Ultra refined metal powders create a smooth finish
Easily carved and worked on cutting machines
All colors can be fired together
Comes in five great metals!
Five Star Bronze Clay can be fired with a torch or kiln fired in carbon. Kiln firing is 1500F for 30 minutes to an hour. Clay shrinks between 12-15% depending on firing schedule.
Five Star Copper Clay - 50 gram - Min of 2
Five Star Copper Clay - 50 gram
The newest thing in copper and bronze metal clays!
Five Star Metal Clay has all of the features you desire in base metals:
Fires simply and fast
Ultra refined metal powders create a smooth finish
Easily carved and worked on cutting machines
All colors can be fired together
Comes in five great metals!
Five Star Copper can be fired with a torch or kiln fired in carbon. Kiln firing is 1700F for 30 minutes to an hour. Clay shrinks between 12-15% depending on firing schedule.
Five Star Bronze Clay - 50 gram - Min of 2
Five Star Bronze Clay - 50 gram
The newest thing in copper and bronze metal clays!
Five Star Metal Clay has all of the features you desire in base metals:
Fires simply and fast
Ultra refined metal powders create a smooth finish
Easily carved and worked on cutting machines
All colors can be fired together
Comes in five great metals!
Five Star Bronze Clay can be fired with a torch or kiln fired in carbon. Kiln firing is 1500F for 30 minutes to an hour. Clay shrinks between 12-15% depending on firing schedule.
Five Star Copper Clay - 50 gram
Five Star Copper Clay - 50 gram
The newest thing in copper and bronze metal clays!
Five Star Metal Clay has all of the features you desire in base metals:
Fires simply and fast
Ultra refined metal powders create a smooth finish
Easily carved and worked on cutting machines
All colors can be fired together
Comes in five great metals!
Five Star Copper can be fired with a torch or kiln fired in carbon. Kiln firing is 1700F for 30 minutes to an hour. Clay shrinks between 12-15% depending on firing schedule.
Five Star Bronze Clay - 50 gram
Five Star Bronze Clay - 50 gram
The newest thing in copper and bronze metal clays!
Five Star Metal Clay has all of the features you desire in base metals:
Fires simply and fast
Ultra refined metal powders create a smooth finish
Easily carved and worked on cutting machines
All colors can be fired together
Comes in five great metals!
Five Star Bronze Clay can be fired with a torch or kiln fired in carbon. Kiln firing is 1500F for 30 minutes to an hour. Clay shrinks between 12-15% depending on firing schedule.
Five Star Red Bronze Clay - 50 gram
Five Star Red Bronze Clay - 50 gram
The newest thing in copper and bronze metal clays!
Five Star Metal Clay has all of the features you desire in base metals:
Fires simply and fast
Ultra refined metal powders create a smooth finish
Easily carved and worked on cutting machines
All colors can be fired together
Comes in five great metals!
Five Star Red Bronze Clay can be fired with a torch or kiln fired in carbon. Kiln firing is 1600F for 30 minutes to an hour. Clay shrinks between 12-15% depending on firing schedule.
Five Star White Bronze Clay - 50 gram - 3+ Pkgs
Five Star White Bronze Clay - 50 gram
The newest thing in copper and bronze metal clays!
Five Star Metal Clay has all of the features you desire in base metals:
Fires simply and fast
Ultra refined metal powders create a smooth finish
Easily carved and worked on cutting machines
All colors can be fired together
Comes in five great metals!
Five Star White Bronze Clay should be fired in a kiln in activated coconut carbon. Kiln firing is 1300F for 30 minutes to an hour. Clay shrinks between 12-15% depending on firing schedule.
Five Star Light Bronze Clay - 50 gram - 3+ Pkgs
Five Star Light Bronze Clay - 50 gram
The newest thing in copper and bronze metal clays!
Five Star Metal Clay has all of the features you desire in base metals:
Fires simply and fast
Ultra refined metal powders create a smooth finish
Easily carved and worked on cutting machines
All colors can be fired together
Comes in five great metals!
Five Star White Bronze should be fired in a kiln in activated coconut carbon. Kiln firing is 1400F for 30 minutes to an hour. Clay shrinks between 12-15% depending on firing schedule.
Five Star White Bronze Clay - 50 gram - Min of 2
Five Star White Bronze Clay - 50 gram
The newest thing in copper and bronze metal clays!
Five Star Metal Clay has all of the features you desire in base metals:
Fires simply and fast
Ultra refined metal powders create a smooth finish
Easily carved and worked on cutting machines
All colors can be fired together
Comes in five great metals!
Five Star White Bronze should be fired in a kiln in activated coconut carbon. Kiln firing is 1300F for 30 minutes to an hour. Clay shrinks between 12-15% depending on firing schedule.
Five Star Light Bronze Clay - 50 gram - Min of 2
Five Star Light Bronze Clay - 50 gram
The newest thing in copper and bronze metal clays!
Five Star Metal Clay has all of the features you desire in base metals:
Fires simply and fast
Ultra refined metal powders create a smooth finish
Easily carved and worked on cutting machines
All colors can be fired together
Comes in five great metals!
Five Star White Bronze should be fired in a kiln in activated coconut carbon. Kiln firing is 1400F for 30 minutes to an hour. Clay shrinks between 12-15% depending on firing schedule.
Goldie Red Iron - 50 gram
Goldie Red Iron - 50 gram
Goldie Iron™ comes in five different colors. This is Red Iron, which is a silver-copper color. The powder, in addition to iron (the main component) consists of metals such as brass, copper and bronze.
This clay comes in dry powder form. The dry powder can be kept for years. Mix only the amount you need so you always have fresh clay with the perfect texture. You'll have longer working time and a more workable product when the clay is mixed fresh as you need it.
Click Here for Complete Instructions, including mixing instructions and firing schedules.
We do not suggest soldering with Goldie Red Iron, as the colors will clash.
Goldie Yellow Iron - 50 gram
Goldie Yellow Iron - 50 gram
Goldie Iron™ comes in five different colors. This is Yellow Iron, which is a silver-yellow color. The powder, in addition to iron (the main component) consists of metals such as brass, copper and bronze.
This clay comes in dry powder form. The dry powder can be kept for years. Mix only the amount you need so you always have fresh clay with the perfect texture. You'll have longer working time and a more workable product when the clay is mixed fresh as you need it.
Click Here for Complete Instructions, including mixing instructions and firing schedules.
We suggest using
Copper Solder Paste when soldering Goldie Yellow Iron.
Goldie Cherry Iron - 50 gram
Goldie Cherry Iron - 50 gram
Goldie Iron™ comes in five different colors. This is Cherry Iron, which is a silver-cherry color. The powder, in addition to iron (the main component) consists of metals such as brass, copper and bronze.
This clay comes in dry powder form. The dry powder can be kept for years. Mix only the amount you need so you always have fresh clay with the perfect texture. You'll have longer working time and a more workable product when the clay is mixed fresh as you need it.
Click Here for Complete Instructions, including mixing instructions and firing schedules.
We do not suggest soldering with Goldie Cherry Iron, as the colors will clash.
Goldie White Iron - 50 gram
Goldie White Iron - 50 gram
Goldie Iron™ comes in five different colors. This is White Iron, which has the color of iron. The powder, in addition to iron (the main component) consists of metals such as brass, copper and bronze.
This clay comes in dry powder form. The dry powder can be kept for years. Mix only the amount you need so you always have fresh clay with the perfect texture. You'll have longer working time and a more workable product when the clay is mixed fresh as you need it.
Click Here for Complete Instructions, including mixing instructions and firing schedules.
We suggest using either
Low Temp Silver Solder Paste or
Extra Easy Silver Solder Paste when soldering Goldie White Iron.
Goldie Sculptor's Copper - 50 gram
Goldie Sculptor's Copper - 50 gram
Goldie Sculptor’s Copper™ is copper of a beautiful pure red color. It is formulated with
long carbo-hydrogen chains in the binder formula to have much greater strength and
more resistance to collapse under its own weight than regular bronze clays and is more
cohesive when wet and stronger after the first firing step. This allows the artist sculptor
to create much larger designs. Another aspect of Sculptor’s Copper is its silky smooth
texture and with appropriate hydration it can be thrown on a potter’s wheel.
This clay is well suited for sculptures and larger forms of
jewelry. You can shape the wet and dry clay using chisels and other traditional sculptor’s
tools.
Goldie Sculptor’s Copper™ is environmentally friendly. The powder contains 99.9% of
pure dendrite copper. The binders are organic and non toxic.
It shrinks by about 15%-23% on firing, depending on the shape
and the size of the piece.
This clay comes in dry powder form. The dry powder can be kept for years. Mix only the amount you need so you always have fresh clay with the perfect texture. You'll have longer working time and a more workable product when the clay is mixed fresh as you need it.
Click Here for Complete Instructions, including mixing instructions and firing schedules.
Five Star White Bronze Clay - 50 gram
Five Star White Bronze Clay - 50 gram
The newest thing in copper and bronze metal clays!
Five Star Metal Clay has all of the features you desire in base metals:
Fires simply and fast
Ultra refined metal powders create a smooth finish
Easily carved and worked on cutting machines
All colors can be fired together
Comes in five great metals!
Five Star White Bronze should be fired in a kiln in activated coconut carbon. Kiln firing is 1300F for 30 minutes to an hour. Clay shrinks between 12-15% depending on firing schedule.
Five Star Light Bronze Clay - 50 gram
Five Star Light Bronze Clay - 50 gram
The newest thing in copper and bronze metal clays!
Five Star Metal Clay has all of the features you desire in base metals:
Fires simply and fast
Ultra refined metal powders create a smooth finish
Easily carved and worked on cutting machines
All colors can be fired together
Comes in five great metals!
Five Star White Bronze should be fired in a kiln in activated coconut carbon. Kiln firing is 1400F for 30 minutes to an hour. Clay shrinks between 12-15% depending on firing schedule.
Goldie Sculptor's Bronze Metal Clay - 50 gram
Goldie Sculptor's Bronze - 50 gram
Goldie Sculptor’s Bronze™ is bronze of a beautiful golden color, which is very hard after
firing. It is formulated with long carbo-hydrogen chains in the binder formula to have
much greater strength and more resistance to collapse under its own weight than regular
bronze clays and is more cohesive when wet and stronger after the first firing step. This
allows the artist sculptor to create much larger designs. Another aspect of Sculptor’s
Bronze is its silky smooth texture and with appropriate hydration it can be thrown on a
potter’s wheel.
This clay is well suited for sculptures and larger forms of
jewelry. You can shape the wet and dry clay using chisels and other traditional sculptor’s
tools.
Goldie Sculptor’s Bronze™ is environmentally friendly and contains approximately 90%
copper and 10% tin. The binders are organic and non toxic. The container that the powder
comes in is deliberately larger than needed so it can be reused afterwards. Please do your
part for the environment and keep the container for future use (non food use only).
Goldie Sculptor’s Bronze™ shrinks by about 9%-14% on firing, depending on the shape
and the size of the piece.
This clay comes in dry powder form. The dry powder can be kept for years. Mix only the amount you need so you always have fresh clay with the perfect texture. You'll have longer working time and a more workable product when the clay is mixed fresh as you need it.
Click Here for Complete Instructions, including mixing instructions and firing schedules.
Goldie Bronze Metal Clay - Mid 50 gram
Goldie Bronze - Mid 50 gram
Goldie Bronze™ is bronze of a beautiful golden color, very hard after firing, comes in three types of powder - HARD, MID and SOFT. SOFT is very soft and is ideal for working with stamps and textures, and to capture fine details. MID is 50% hard and 50% soft, designed to give a combination of maximum strength and picking up on fine details. HARD creates a somewhat stiffer clay to work with, and yields the maximum strength - it is ideal for bangles, ring bands, and decorative objects.
Goldie Bronze™ is an environmentally friendly product. It contains approximately 90% copper and 10% tin. The binders are organic and non-toxic.
Goldie Bronze™ shrinks by about 8%-11% on firing, depending on the shape and the size of the piece. Dried clay can be ground up to a powder and reconstituted. Goldie Bronze™ is simple and economical to use.
This clay comes in dry powder form. The dry powder can be kept for years. Mix only the amount you need so you always have fresh clay with the perfect texture. You'll have longer working time and a more workable product when the clay is mixed fresh as you need it.
Click Here for Complete Instructions, including mixing instructions and firing schedules.
Goldie Lemon Brass - 50 gram
Goldie Lemon Brass - 50 gram
Goldie Lemon Brass™ has a lovely yellowish color. It is environmentally friendly and contains approximately 90% brass and 10% bronze to
stabilize the burning process. The binders are organic and non toxic.
This clay shrinks by about 9%-15% on firing, depending on the shape and the size of the piece.
This clay comes in dry powder form. The dry powder can be kept for years. Mix only the amount you need so you always have fresh clay with the perfect texture. You'll have longer working time and a more workable product when the clay is mixed fresh as you need it.
Click Here for Complete Instructions, including mixing instructions and firing schedules.
Goldie Sunset Iron - 50 gram
Goldie Sunset Iron - 50 gram
Goldie Iron™ comes in five different colors. This is Sunset Iron, which is a silver-bronze color. The powder, in addition to iron (the main component) consists of metals such as brass, copper and bronze.
This clay comes in dry powder form. The dry powder can be kept for years. Mix only the amount you need so you always have fresh clay with the perfect texture. You'll have longer working time and a more workable product when the clay is mixed fresh as you need it.
Click Here for Complete Instructions, including mixing instructions and firing schedules.
We suggest using
Copper Solder Paste when soldering Goldie Sunset Iron.
Goldie Copper - 50 gram
Goldie Copper™
A very pure copper clay. The powder contains 99.9% of pure dendrite copper. After firing and removing the patina created in the firing process, the metal is very light and has a beautiful color.
Goldie Copper™ is an environmentally friendly product. The binders are organic and non-toxic. The container that the powder comes in is deliberately larger than needed so it can be reused afterwards.
Goldie Copper™ shrinks by about 12%-18% on firing, depending on the shape and the size of the piece. Dried clay can be ground up to a powder and reconstituted. Goldie Copper™ is simple and economical to use.
This clay comes in dry powder form. The dry powder can be kept for years. Mix only the amount you need so you always have fresh clay with the perfect texture. You'll have longer working time and a more workable product when the clay is mixed fresh as you need it.
Click Here for Complete Instructions, including mixing instructions and firing schedules. Fire in activated carbon. Requires temperature controlled kiln firing.
PMC Sheet - 5 gram - Silver Metal Clay - 3cm x 12cm
PMC Sheet - 5 gm
PMC sheet is 85% fine silver and 15% binder by weight. This variety shrinks 12-15% during firing. The metal particles in this version are smaller than those in PMC Original, which allows higher metal content and therefore less shrinkage.
Click on the "TechSpecs" tab above for firing instructions and additional information.
Goldie Bronze Powder Clay - Soft 50 gram
Goldie Bronze - Soft 50 gram
Goldie Bronze™ is bronze of a beautiful golden color, very hard after firing, comes in three types of powder - HARD, MID and SOFT. SOFT is very soft and is ideal for working with stamps and textures, and to capture fine details. MID is 50% hard and 50% soft, designed to give a combination of maximum strength and picking up on fine details. HARD creates a somewhat stiffer clay to work with, and yields the maximum strength - it is ideal for bangles, ring bands, and decorative objects.
Goldie Bronze™ is an environmentally friendly product. It contains approximately 90% copper and 10% tin. The binders are organic and non-toxic.
Goldie Bronze™ shrinks by about 8%-11% on firing, depending on the shape and the size of the piece. Dried clay can be ground up to a powder and reconstituted. Goldie Bronze™ is simple and economical to use.
This clay comes in dry powder form. The dry powder can be kept for years. Mix only the amount you need so you always have fresh clay with the perfect texture. You'll have longer working time and a more workable product when the clay is mixed fresh as you need it.
Click Here for Complete Instructions, including mixing instructions and firing schedules.
Goldie Bronze Metal Clay - de la Rosa 50 gram
Goldie Bronze - de la Rosa 50 gram
Goldie de la Rosa Bronze™ is a bronze of a pinkish color, very hard after the firing.
Goldie de la Rosa Bronze™ is an environmentally friendly product. It contains approximately 94% copper and 6% tin. The binders are organic and non-toxic. The container that the powder comes in is deliberately larger than needed so it can be reused afterwards.
Goldie Roman Bronze™ shrinks by about 11%-14% on firing, depending on the shape and the size of the piece. Dried clay can be ground up to a powder and reconstituted. Goldie de la Rosa
Bronze™ is simple and economical to use.
This clay comes in dry powder form. The dry powder can be kept for years. Mix only the amount you need so you always have fresh clay with the perfect texture. You'll have longer working time and a more workable product when the clay is mixed fresh as you need it.
Click Here for Complete Instructions, including mixing instructions and firing schedules. Fire in activated carbon. Requires temperature controlled kiln firing.
3D BRONZpaste - 50 gram Cartridge
3D BRONZpaste
FastFireBronze paste for use in the 3DMetalCreator which allows the artist or maker to create solid bronze or silver objects, designs, sculpture or jewelry in ways that are limited only by your imagination.
Goldie Bronze - Snow 50 gram
Goldie Bronze - Snow 50 gram
Goldie Snow Bronze™ is a white kind of bronze. The seeds are a bit larger than in the case of other bronzes, up to 75 micrometers, that’s why we can find it a bit grainy after mixing with water. Snow Bronze has a high tin content (21%). Its large powder seeds are very strongly connected to each other after burning. The material is smooth after firing, with no traces of seeds.
Goldie Snow Bronze™ is an environmentally friendly product. It contains approximately 79% copper and 21% tin. The binders are organic and non-toxic. The container that the powder comes in is deliberately larger than needed so it can be reused afterwards.
Goldie Snow Bronze™ shrinks by about 16%-30% on firing, depending on the shape and the size of the piece, and the temperature of firing. The temperature depends on the thermal efficiency of the kiln. The smaller kilns - higher temperature. Dried clay can be ground up to a powder and
reconstituted. Goldie Snow Bronze™ is simple and economical to use.
This clay comes in dry powder form. The dry powder can be kept for years. Mix only the amount you need so you always have fresh clay with the perfect texture. You'll have longer working time and a more workable product when the clay is mixed fresh as you need it.
Click Here for Complete Instructions, including mixing instructions and firing schedules. Fire in activated carbon. Requires temperature controlled kiln firing.
Hadar's Clay Metal Clay - One-Fire Copper 50 gram
Hadar's Clay - One-Fire Copper 50 gram
This variety of Hadar's Clay is fired in one phase only, both on its own and in combination with Champagne and Dark Champagne Bronze, and Low-Shrinkage Steel XT.
Kiln fire temperatures vary depending on the kiln type (brick or muffle). Click on the "TechSpecs" tab above to view or print.
Hadar's Clay - One-Fire Dark Champagne Bronze 50 gram
Hadar's Clay - One-Fire Dark Champagne Bronze 50 gram
This variety of Hadar's Clay is fired in one phase only, both on its own and in combination with One-fir Copper, White Satin, and Low-Shrinkage Steel XT.
Kiln fire temperatures vary depending on the kiln type (brick or muffle). Click on the "TechSpecs" tab above to view or print.
Hadar's Clay - One-Fire Rose Bronze 50 gram
Hadar's Clay - One-Fire Rose Bronze 50 gram
This variety of Hadar's Clay is fired in one phase only, both on its own and in combination with Champagne and Dark Champagne Bronze, and Low-Shrinkage Steel XT.
Kiln fire temperatures vary depending on the kiln type (brick or muffle). Click on the "TechSpecs" tab above to view or print.
Hadar's Clay - One-Fire Bronze 50 gram
Hadar's Clay - One-Fire Bronze 50 gram
This variety of Hadar's Clay is a mid-fire clay, fired in one phase only, both on its own and in combination with One-fire Copper and Pearl Grey Steel to create patterns of color (mokume-gane).
Kiln fire temperatures vary depending on the kiln type (brick or muffle). Click on the "TechSpecs" tab above to view or print.
Hadar's Clay - One-Fire Brilliant Bronze 50 gram
Hadar's Clay - One-Fire Brilliant Bronze 50 gram
This variety of Hadar's Clay is mid-fire and can be fired both on its own and in combination with One-fire Copper and Pearl Grey Steel to create pattern of color (mokume-gane).
Kiln fire temperatures vary depending on the kiln type (brick or muffle). Click on the "TechSpecs" tab above to view or print.
Hadar's Clay Metal Clay - One-Fire Flex - Dark Champagne Bronze 50 gram
Hadar's Clay Metal Clay - One-Fire Flex - Dark Champagne Bronze
One-Fire Flex identical to other One-Fire clays in consistency (powder),
shrinkage, and firing schedule. The difference is that when they are rolled to dry sheets, they stay flexible, which makes them especially fit for use with a cutting and embossing machine, such as the Silhouette, as well as with punches and scissors. They can be used in combination with One-Fire clays.
This clay comes in dry powder form. The dry powder can be kept for years. Mix only the amount you need so you always have fresh clay with the perfect texture. You'll have longer working time and a more workable product when the clay is mixed fresh as you need it.
Kiln fire temperatures vary depending on the kiln type (brick or muffle). Click on the
"TechSpecs" tab above to view or print.
Want quick tips from Artist and Instructor, Cindy Pope? Click on the
"Product Tips" tab.
Hadar's Clay Metal Clay - One-Fire Flex - Brilliant Bronze 50 gram
Hadar's Clay Metal Clay - One-Fire Flex - Brilliant Bronze
One-Fire Flex identical to other One-Fire clays in consistency (powder),
shrinkage, and firing schedule. The difference is that when they are rolled to dry sheets, they stay flexible, which makes them especially fit for use with a cutting and embossing machine, such as the Silhouette, as well as with punches and scissors. They can be used in combination with One-Fire clays.
This clay comes in dry powder form. The dry powder can be kept for years. Mix only the amount you need so you always have fresh clay with the perfect texture. You'll have longer working time and a more workable product when the clay is mixed fresh as you need it.
Kiln fire temperatures vary depending on the kiln type (brick or muffle). Click on the
"TechSpecs" tab above to view or print.
Want quick tips from Artist and Instructor, Cindy Pope? Click on the
"Product Tips" tab.
Hadar's Clay Metal Clay - One-Fire Flex - White Satin 50 gram
Hadar's Clay Metal Clay - One-Fire Flex - White Satin
One-Fire Flex identical to other One-Fire clays in consistency (powder),
shrinkage, and firing schedule. The difference is that when they are rolled to dry sheets, they stay flexible, which makes them especially fit for use with a cutting and embossing machine, such as the Silhouette, as well as with punches and scissors. They can be used in combination with One-Fire clays.
This clay comes in dry powder form. The dry powder can be kept for years. Mix only the amount you need so you always have fresh clay with the perfect texture. You'll have longer working time and a more workable product when the clay is mixed fresh as you need it.
Kiln fire temperatures vary depending on the kiln type (brick or muffle). Click on the
"TechSpecs" tab above to view or print.
Want quick tips from Artist and Instructor, Cindy Pope? Click on the
"Product Tips" tab.
Hadar's Clay Metal Clay - One-Fire Flex - Rose Bronze 50 gram
Hadar's Clay Metal Clay - One-Fire Flex - Rose Bronze
One-Fire Flex identical to other One-Fire clays in consistency (powder),
shrinkage, and firing schedule. The difference is that when they are rolled to dry sheets, they stay flexible, which makes them especially fit for use with a cutting and embossing machine, such as the Silhouette, as well as with punches and scissors. They can be used in combination with One-Fire clays.
This clay comes in dry powder form. The dry powder can be kept for years. Mix only the amount you need so you always have fresh clay with the perfect texture. You'll have longer working time and a more workable product when the clay is mixed fresh as you need it.
Kiln fire temperatures vary depending on the kiln type (brick or muffle). Click on the
"TechSpecs" tab above to view or print.
Want quick tips from Artist and Instructor, Cindy Pope? Click on the
"Product Tips" tab.
Hadar's Clay Metal Clay - One-Fire Flex - White Bronze 50 gram
Hadar's Clay Metal Clay - One-Fire Flex - White Bronze
One-Fire Flex identical to other One-Fire clays in consistency (powder),
shrinkage, and firing schedule. The difference is that when they are rolled to dry sheets, they stay flexible, which makes them especially fit for use with a cutting and embossing machine, such as the Silhouette, as well as with punches and scissors. They can be used in combination with One-Fire clays.
This clay comes in dry powder form. The dry powder can be kept for years. Mix only the amount you need so you always have fresh clay with the perfect texture. You'll have longer working time and a more workable product when the clay is mixed fresh as you need it.
Kiln fire temperatures vary depending on the kiln type (brick or muffle). Click on the
"TechSpecs" tab above to view or print.
Want quick tips from Artist and Instructor, Cindy Pope? Click on the
"Product Tips" tab.
Hadar's Clay - One-Fire Pearl Grey Steel - 50 gram
Hadar's Clay - One-Fire Pearl Grey Steel - 50 gram
metal clay in dry powder form
This clay is a high-fire clay which works best in combination with other metals (One-fire Bronze or Brilliant Bronze and one-fire Copper) for color effects (mokume-gane). It can be fired on its own as well but will be too hard to bend and drill.
This clay comes in dry powder form. The dry powder can be kept for years. Mix only the amount you need so you always have fresh clay with the perfect texture. You'll have longer working time and a more workable product when the clay is mixed fresh as you need it.
Kiln fire temperatures vary depending on the kiln type (brick or muffle). Click on the "TechSpecs" tab above to view or print.
Hadar's Clay - One-Fire Low Shrinkage - Steel XT - 50 gram
Hadar's Clay - One-Fire Low Shrinkage - Steel XT - 50 gram
metal clay in dry powder form
This variety of Hadar's Clay is high-fire, and fired in one phase only, both on its own and in combination with One-fire Copper, One-fire Champagne and Dark Champagne Bronze, and One-fire Rose Bronze.
This clay comes in dry powder form. The dry powder can be kept for years. Mix only the amount you need so you always have fresh clay with the perfect texture. You'll have longer working time and a more workable product when the clay is mixed fresh as you need it.
Kiln fire temperatures vary depending on the kiln type (brick or muffle). Click on the "TechSpecs" tab above to view or print.
Hadar's Clay - One-Fire White Satin 50 gram
Hadar's Clay - One-Fire White Satin 50 gram
This variety of Hadar's Clay is fired in one phase only, both on its own and in combination with One-fire Copper, Champagne and Dark Champagne Bronze, and Low-Shrinkage Steel XT.
Kiln fire temperatures vary depending on the kiln type (brick or muffle). Click on the "TechSpecs" tab above to view or print.
Hadar's Clay - One-Fire Smart Bronze 50 gram
Hadar's Clay - One-Fire Smart Bronze 50 gram
Smart Bronze is a one-fire bronze with a 24K gold color. This variety of Hadar's Clay is low-fire, and is best used on its own.
Kiln fire temperatures vary depending on the kiln type (brick or muffle). Click on the "TechSpecs" tab above to view or print.
Hadar's Clay Metal Clay - One-Fire Flex - Copper 50 gram
Hadar's Clay - One-Fire Flex - Copper 50 gram
One-Fire Flex identical to other One-Fire clays in consistency (powder),
shrinkage, and firing schedule. The difference is that when they are rolled to dry sheets, they stay flexible, which makes them especially fit for use with a cutting and embossing machine, such as the Silhouette, as well as with punches and scissors. They can be used in combination with One-Fire clays.
This clay comes in dry powder form. The dry powder can be kept for years. Mix only the amount you need so you always have fresh clay with the perfect texture. You'll have longer working time and a more workable product when the clay is mixed fresh as you need it.
Kiln fire temperatures vary depending on the kiln type (brick or muffle). Click on the
"TechSpecs" tab above to view or print.
Want quick tips from Artist and Instructor, Cindy Pope? Click on the
"Product Tips" tab.
Hadar's Clay Metal Clay - One-Fire Flex - Pearl Grey Steel 50 gram
Hadar's Clay Metal Clay - One-Fire Flex - Pearl Grey Steel
One-Fire Flex identical to other One-Fire clays in consistency (powder),
shrinkage, and firing schedule. The difference is that when they are rolled to dry sheets, they stay flexible, which makes them especially fit for use with a cutting and embossing machine, such as the Silhouette, as well as with punches and scissors. They can be used in combination with One-Fire clays.
This clay comes in dry powder form. The dry powder can be kept for years. Mix only the amount you need so you always have fresh clay with the perfect texture. You'll have longer working time and a more workable product when the clay is mixed fresh as you need it.
Kiln fire temperatures vary depending on the kiln type (brick or muffle). Click on the
"TechSpecs" tab above to view or print.
Want quick tips from Artist and Instructor, Cindy Pope? Click on the
"Product Tips" tab.
Five Star Copper Clay - 100 gram - 3+ Pkgs
Five Star Copper Clay - 100 gram
The newest thing in copper and bronze metal clays!
Five Star Metal Clay has all of the features you desire in base metals:
Fires simply and fast
Ultra refined metal powders create a smooth finish
Easily carved and worked on cutting machines
All colors can be fired together
Comes in five great metals!
Five Star Copper can be fired with a torch or kiln fired in carbon. Kiln firing is 1700F for 30 minutes to an hour. Clay shrinks between 12-15% depending on firing schedule.
Five Star Copper Clay - 100 gram - Min of 2
Five Star Copper Clay - 100 gram
The newest thing in copper and bronze metal clays!
Five Star Metal Clay has all of the features you desire in base metals:
Fires simply and fast
Ultra refined metal powders create a smooth finish
Easily carved and worked on cutting machines
All colors can be fired together
Comes in five great metals!
Five Star Copper can be fired with a torch or kiln fired in carbon. Kiln firing is 1700F for 30 minutes to an hour. Clay shrinks between 12-15% depending on firing schedule.
Five Star Copper Clay - 100 gram
Five Star Copper Clay - 100 gram
The newest thing in copper and bronze metal clays!
Five Star Metal Clay has all of the features you desire in base metals:
Fires simply and fast
Ultra refined metal powders create a smooth finish
Easily carved and worked on cutting machines
All colors can be fired together
Comes in five great metals!
Five Star Copper can be fired with a torch or kiln fired in carbon. Kiln firing is 1700F for 30 minutes to an hour. Clay shrinks between 12-15% depending on firing schedule.
Five Star Red Bronze Clay - 100 gram
Five Star Red Bronze Clay - 100 gram
The newest thing in copper and bronze metal clays!
Five Star Metal Clay has all of the features you desire in base metals:
Fires simply and fast
Ultra refined metal powders create a smooth finish
Easily carved and worked on cutting machines
All colors can be fired together
Comes in five great metals!
Five Star Copper can be fired with a torch or kiln fired in carbon. Kiln firing is 1600F for 30 minutes to an hour. Clay shrinks between 12-15% depending on firing schedule.
Five Star White Bronze Clay - 100 gram
Five Star White Bronze Clay - 100 gram
The newest thing in copper and bronze metal clays!
Five Star Metal Clay has all of the features you desire in base metals:
Fires simply and fast
Ultra refined metal powders create a smooth finish
Easily carved and worked on cutting machines
All colors can be fired together
Comes in five great metals!
Five Star White Bronze should be fired in a kiln in activated coconut carbon. Kiln firing is 1300F for 30 minutes to an hour. Clay shrinks between 12-15% depending on firing schedule.
Art Clay™ Silver Paste 10 gram
Art Clay Silver Paste - 10 gm
This silver metal clay is perfect for use with glass, sterling silver and settings.
Click the "TecSpecs" tab above for firing instructions and additional details.
PMC 3 Silver Syringe - 9 gram - Precious Metal Clay
PMC 3 Syringe - 9 gm
form - .999 fine silver after This PMC3 slip/paste comes ready to use in a convenient applicator syringe, saving you the time of having to thin out clay yourself. Ideal for repairs, connecting clay parts and adding details to your designs. You can also embed findings with confidence--firing at a low temperature means they won’t be heat-damaged. PMC3 is suitable for torch-firing as well as kiln-firing.
Click on the "TechSpecs" tab above for firing instructions and additional informaiton.
Goldie Cherry Iron - 100 gram
Goldie Cherry Iron - 100 gram
Goldie Iron™ comes in five different colors. This is Cherry Iron, which is a silver-cherry color. The powder, in addition to iron (the main component) consists of metals such as brass, copper and bronze.
This clay comes in dry powder form. The dry powder can be kept for years. Mix only the amount you need so you always have fresh clay with the perfect texture. You'll have longer working time and a more workable product when the clay is mixed fresh as you need it.
Click Here for Complete Instructions, including mixing instructions and firing schedules.
We do not suggest soldering with Goldie Cherry Iron, as the colors will clash.
Goldie Sunset Iron - 100 gram
Goldie Sunset Iron - 100 gram
Goldie Iron™ comes in five different colors. This is Sunset Iron, which is a silver-bronze color. The powder, in addition to iron (the main component) consists of metals such as brass, copper and bronze.
This clay comes in dry powder form. The dry powder can be kept for years. Mix only the amount you need so you always have fresh clay with the perfect texture. You'll have longer working time and a more workable product when the clay is mixed fresh as you need it.
Click Here for Complete Instructions, including mixing instructions and firing schedules.
We suggest using
Copper Solder Paste when soldering Goldie Sunset Iron.
Goldie Yellow Iron - 100 gram
Goldie Yellow Iron - 100 gram
Goldie Iron™ comes in five different colors. This is Yellow Iron, which is a silver-yellow color. The powder, in addition to iron (the main component) consists of metals such as brass, copper and bronze.
This clay comes in dry powder form. The dry powder can be kept for years. Mix only the amount you need so you always have fresh clay with the perfect texture. You'll have longer working time and a more workable product when the clay is mixed fresh as you need it.
Click Here for Complete Instructions, including mixing instructions and firing schedules.
We suggest using
Copper Solder Paste when soldering Goldie Yellow Iron.
Goldie White Iron - 100 gram
Goldie White Iron - 100 gram
Goldie Iron™ comes in five different colors. This is White Iron, which has the color of iron. The powder, in addition to iron (the main component) consists of metals such as brass, copper and bronze.
This clay comes in dry powder form. The dry powder can be kept for years. Mix only the amount you need so you always have fresh clay with the perfect texture. You'll have longer working time and a more workable product when the clay is mixed fresh as you need it.
Click Here for Complete Instructions, including mixing instructions and firing schedules.
We suggest using either
Low Temp Silver Solder Paste or
Extra Easy Silver Solder Paste when soldering Goldie White Iron.
Goldie Red Iron - 100 gram
Goldie Red Iron - 100 gram
Goldie Iron™ comes in five different colors. This is Red Iron, which is a silver-copper color. The powder, in addition to iron (the main component) consists of metals such as brass, copper and bronze.
This clay comes in dry powder form. The dry powder can be kept for years. Mix only the amount you need so you always have fresh clay with the perfect texture. You'll have longer working time and a more workable product when the clay is mixed fresh as you need it.
Click Here for Complete Instructions, including mixing instructions and firing schedules.
We do not suggest soldering with Goldie Red Iron, as the colors will clash.
Hadar's Clay - Quick Fire Bronze 100 gram
Hadar's Clay - Quick Fire Bronze 100 gm
This clay comes in dry powder form. The dry powder can be kept for years. Mix only the amount you need so you always have fresh clay with the perfect texture. You'll have longer working time and a more workable product when the clay is mixed fresh as you need it.
Art Clay™ Silver Paper 10 gram
Art Clay Silver Paper - 10 gm
.999 Fine Silver
You can easily fold, bend, punch or
cut shapes with a pair of scissors or paper punches just like you do
with regular paper materials. You can apply techniques from origami,
paper crafting, fabric and leather crafting. Add syringe or use punchings on lump clay projects.
Click on our "TechSpecs" tab for firing instructions and additional information.
Hadar's Clay - One-Fire Champagne Bronze 100 gram
Hadar's Clay - One-Fire Champagne Bronze 100 gram
This variety of Hadar's Clay is fired in one phase only, both on its own and in combination with One-fire Copper and Low-Shrinkage Steel XT.
Kiln fire temperatures vary depending on the kiln type (brick or muffle). Click on the "TechSpecs" tab above to view or print.
Hadar's Clay Metal Clay - One-Fire Copper 100 gram
Hadar's Clay - One-Fire Copper 100 gram
This variety of Hadar's Clay is fired in one phase only, both on its own and in combination with Champagne and Dark Champagne Bronze, and Low-Shrinkage Steel XT.
Kiln fire temperatures vary depending on the kiln type (brick or muffle). Click on the "TechSpecs" tab above to view or print.
Hadar's Clay - One-Fire Dark Champagne Bronze 100 gram
Hadar's Clay - One-Fire Dark Champagne Bronze 100 gram
This variety of Hadar's Clay is fired in one phase only, both on its own and in combination with One-fire Copper, White Satin, and Low-Shrinkage Steel XT.
Kiln fire temperatures vary depending on the kiln type (brick or muffle). Click on the "TechSpecs" tab above to view or print.
Hadar's Clay - One-Fire Rose Bronze 100 gram
Hadar's Clay - One-Fire Rose Bronze 100 gram
This variety of Hadar's Clay is fired in one phase only, both on its own and in combination with Champagne and Dark Champagne Bronze, and Low-Shrinkage Steel XT.
Kiln fire temperatures vary depending on the kiln type (brick or muffle). Click on the "TechSpecs" tab above to view or print.
Hadar's Clay - One-Fire White Bronze 100 gram
Hadar's Clay - One-Fire White Bronze 100 gram
White Bronze is a low-fire clay with a silver color which hardly ever tarnishes. It is recommended to use it in combination with other clays.
Kiln fire temperatures vary depending on the kiln type (brick or muffle). Click on the "TechSpecs" tab above to view or print.
Hadar's Clay - One-Fire Bronze 100 gram
Hadar's Clay - One-Fire Bronze 100 gram
This variety of Hadar's Clay is a mid-fire clay, fired in one phase only, both on its own and in combination with One-fire Copper and Pearl Grey Steel to create patterns of color (mokume-gane).
Kiln fire temperatures vary depending on the kiln type (brick or muffle). Click on the "TechSpecs" tab above to view or print.
Hadar's Clay - One-Fire Brilliant Bronze 100 gram
Hadar's Clay - One-Fire Brilliant Bronze 100 gram
This variety of Hadar's Clay is mid-fire and can be fired both on its own and in combination with One-fire Copper and Pearl Grey Steel to create pattern of color (mokume-gane).
Kiln fire temperatures vary depending on the kiln type (brick or muffle). Click on the "TechSpecs" tab above to view or print.
Goldie Bronze Metal Clay - Mid 100 gram
Goldie Bronze - Mid 100 gram
Goldie Bronze™ is bronze of a beautiful golden color, very hard after firing, comes in three types of powder - HARD, MID and SOFT. SOFT is very soft and is ideal for working with stamps and textures, and to capture fine details. MID is 50% hard and 50% soft, designed to give a combination of maximum strength and picking up on fine details. HARD creates a somewhat stiffer clay to work with, and yields the maximum strength - it is ideal for bangles, ring bands, and decorative objects.
Goldie Bronze™ is an environmentally friendly product. It contains approximately 90% copper and 10% tin. The binders are organic and non-toxic.
Goldie Bronze™ shrinks by about 8%-11% on firing, depending on the shape and the size of the piece. Dried clay can be ground up to a powder and reconstituted. Goldie Bronze™ is simple and economical to use.
This clay comes in dry powder form. The dry powder can be kept for years. Mix only the amount you need so you always have fresh clay with the perfect texture. You'll have longer working time and a more workable product when the clay is mixed fresh as you need it.
Click Here for Complete Instructions, including mixing instructions and firing schedules.
Goldie Lemon Brass - 100 gram
Goldie Lemon Brass - 100 gram
Goldie Lemon Brass™ has a lovely yellowish color. It is environmentally friendly and contains approximately 90% brass and 10% bronze to
stabilize the burning process. The binders are organic and non toxic.
This clay shrinks by about 9%-15% on firing, depending on the shape and the size of the piece.
This clay comes in dry powder form. The dry powder can be kept for years. Mix only the amount you need so you always have fresh clay with the perfect texture. You'll have longer working time and a more workable product when the clay is mixed fresh as you need it.
Click Here for Complete Instructions, including mixing instructions and firing schedules.
Goldie Bronze Powder Clay - Roman 100 gram
Goldie Bronze - Roman 100 gram
Goldie Roman Bronze™ is bronze of a beautiful golden bronze color, resembling the colors used in times of the Roman Empire. The clay is a bit grainier, thanks to larger than usual bronze seeds. After firing and polishing with a 3M wheel or sandpaper, you can notice tiny bronze speckles that reflect the light and create an interesting sparkling effect.
Goldie Roman Bronze™ is an environmentally friendly product. It contains approximately 89% copper and 11% tin. The binders are organic and non-toxic. The container that the powder comes in is deliberately larger than needed so it can be reused afterwards.
Goldie Roman Bronze™ shrinks by about 10%-12% on firing, depending on the shape and the size of the piece. Dried clay can be ground up to a powder and reconstituted. Goldie Roman Bronze™ is simple and economical to use.
This clay comes in dry powder form. The dry powder can be kept for years. Mix only the amount you need so you always have fresh clay with the perfect texture. You'll have longer working time and a more workable product when the clay is mixed fresh as you need it.
Click Here for Complete Instructions, including mixing instructions and firing schedules. Fire in activated carbon. Requires temperature controlled kiln firing.
Goldie Bronze Metal Clay - de la Rosa 100 gram
Goldie Bronze - de la Rosa 100 gram
Goldie de la Rosa Bronze™ is a bronze of a pinkish color, very hard after the firing.
Goldie de la Rosa Bronze™ is an environmentally friendly product. It contains approximately 94% copper and 6% tin. The binders are organic and non-toxic. The container that the powder comes in is deliberately larger than needed so it can be reused afterwards.
Goldie Roman Bronze™ shrinks by about 11%-14% on firing, depending on the shape and the size of the piece. Dried clay can be ground up to a powder and reconstituted. Goldie de la Rosa
Bronze™ is simple and economical to use.
This clay comes in dry powder form. The dry powder can be kept for years. Mix only the amount you need so you always have fresh clay with the perfect texture. You'll have longer working time and a more workable product when the clay is mixed fresh as you need it.
Click Here for Complete Instructions, including mixing instructions and firing schedules. Fire in activated carbon. Requires temperature controlled kiln firing.
Goldie Bronze Powder Clay - Snow 100 gram
Goldie Bronze - Snow 100 gram
Goldie Snow Bronze™ is a white kind of bronze. The seeds are a bit larger than in the case of other bronzes, up to 75 micrometers, that’s why we can find it a bit grainy after mixing with water. Snow Bronze has a high tin content (21%). Its large powder seeds are very strongly connected to each other after burning. The material is smooth after firing, with no traces of seeds.
Goldie Snow Bronze™ is an environmentally friendly product. It contains approximately 79% copper and 21% tin. The binders are organic and non-toxic. The container that the powder comes in is deliberately larger than needed so it can be reused afterwards.
Goldie Snow Bronze™ shrinks by about 16%-30% on firing, depending on the shape and the size of the piece, and the temperature of firing. The temperature depends on the thermal efficiency of the kiln. The smaller kilns - higher temperature. Dried clay can be ground up to a powder and
reconstituted. Goldie Snow Bronze™ is simple and economical to use.
This clay comes in dry powder form. The dry powder can be kept for years. Mix only the amount you need so you always have fresh clay with the perfect texture. You'll have longer working time and a more workable product when the clay is mixed fresh as you need it.
Click Here for Complete Instructions, including mixing instructions and firing schedules. Fire in activated carbon. Requires temperature controlled kiln firing.
PMC 3 Paste - 15 gram jar - Silver Metal Clay
PMC3 Paste
PMC3™ slip (paste) comes ready to use, saving you the time of having to thin out clay yourself. Ideal for repairs, connecting clay parts and adding details to your designs. When fired at 1650° for two hours, PMC3 is the strongest fine silver metal clay available. It has a finer, smoother composition that’s easy to work with and manipulate. You can also embed findings with confidence--firing at a low temperature means they won’t be heat-damaged. PMC3 is suitable for torch-firing as well as kiln-firing.
Click on the "TechSpecs" tab above for firing instructions and additional information.
Five Star Copper Clay - 200 gram
Five Star Copper Clay - 200 gram
The newest thing in copper and bronze metal clays!
Five Star Metal Clay has all of the features you desire in base metals:
Fires simply and fast
Ultra refined metal powders create a smooth finish
Easily carved and worked on cutting machines
All colors can be fired together
Comes in five great metals!
Five Star Copper can be fired with a torch or kiln fired in carbon. Kiln firing is 1700F for 30 minutes to an hour. Clay shrinks between 12-15% depending on firing schedule.
Five Star Bronze Clay - 200 gram
Five Star Bronze Clay - 200 gram
The newest thing in copper and bronze metal clays!
Five Star Metal Clay has all of the features you desire in base metals:
Fires simply and fast
Ultra refined metal powders create a smooth finish
Easily carved and worked on cutting machines
All colors can be fired together
Comes in five great metals!
Five Star Copper can be fired with a torch or kiln fired in carbon. Kiln firing is 1500F for 30 minutes to an hour. Clay shrinks between 12-15% depending on firing schedule.
Art Clay™ Silver Paste - 20 gram
Art Clay Silver Paste - 10 gm
This silver metal clay is perfect for use with glass, sterling silver and settings. Add texture, fill cracks and mends seams with this versatile paste.
Click on our "TechSpecs" tab above for firing instructions and additional information.
Hadar's Clay - One-Fire Mokume-Gane Sampler
Hadar's Clay - One-Fire Mokume-gane Sampler
This sampler includes 50 grams each of One-Fire Bronze, One-Fire Copper and 25 grams of Pearl Grey Steel. These three clays are compatible and fire in one phase using the same firing schedule to create a beautiful pattern of colors called mokume-gane.
Kiln fire temperatures vary depending on the kiln type (brick or muffle). Click on the "TechSpecs" tab above to view or print.
Five Star White Bronze Clay - 200 gram - 3+ Pkgs
Five Star White Bronze Clay - 200 gram
The newest thing in copper and bronze metal clays!
Five Star Metal Clay has all of the features you desire in base metals:
Fires simply and fast
Ultra refined metal powders create a smooth finish
Easily carved and worked on cutting machines
All colors can be fired together
Comes in five great metals!
Five Star White Bronze should be fired in a kiln in activated coconut carbon. Kiln firing is 1300F for 30 minutes to an hour. Clay shrinks between 12-15% depending on firing schedule.
Five Star White Bronze Clay - 200 gram - Min of 2
Five Star White Bronze Clay - 200 gram
The newest thing in copper and bronze metal clays!
Five Star Metal Clay has all of the features you desire in base metals:
Fires simply and fast
Ultra refined metal powders create a smooth finish
Easily carved and worked on cutting machines
All colors can be fired together
Comes in five great metals!
Five Star White Bronze should be fired in a kiln in activated coconut carbon. Kiln firing is 1300F for 30 minutes to an hour. Clay shrinks between 12-15% depending on firing schedule.
Five Star White Bronze Clay - 200 gram
Five Star White Bronze Clay - 200 gram
The newest thing in copper and bronze metal clays!
Five Star Metal Clay has all of the features you desire in base metals:
Fires simply and fast
Ultra refined metal powders create a smooth finish
Easily carved and worked on cutting machines
All colors can be fired together
Comes in five great metals!
Five Star White Bronze should be fired in a kiln in activated coconut carbon. Kiln firing is 1300F for 30 minutes to an hour. Clay shrinks between 12-15% depending on firing schedule.
22K Gold Aura 22 - 1g
22K Gold Aura 22 - 1g
Gold embellishment for sterling and fine silver. This product is a 22K gold paste that is painted onto fired or unfired fine silver clay. It can also be fused to sterling silver that has been depletion gilded. Aura 22 is applied with a paint brush and is bonded using a kiln or hand held torch. Aura 22 is 91.6% pure gold and 8.4% fine silver.
- The wetting solution included with your Aura 22 is necessary only to ensure that the gold solution maintains the appropriate consistency; no more than a drop or two is ever needed.
- The gold material that remains caught in your paintbrush when you’ve finished may be recovered and recycled.
22K Gold Clay - 3 gram
PMC Gold Clay
gold precious metal clay for Jewelry Artists
91.7% gold and 8.3% fine silver. This package will give you 3 grams of 22K gold after firing. This lump clay is used very much like silver clay and has it's own unique working properties. This clay is much stiffer than silver clay. This product can be thinned into a paste and painted onto fired or unfired silver clay products. Use 2 or 3 thin coats rather than thick coats. Each coat should be very well dried before adding additional coats.
