Steel Riveting Block
The Steel Riveting Block is the perfect tool for making and finishing wire rivets and eyelets.
The Steel Riveting Block allows to cut the correct length of wire for your riveting project. Use the holes on the top of the block to pre-cut the perfect length of wire needed. Wire can also be cut by using the middle row of holes, on the top of the block. The holes are 1.8mm deep to create a "head" on both sides. The dimples on the left side, on the top of the block, are used for supporting when riveting to hold the shape of the rounded rivet head. The circles on the right side, on the top of the block, are for riveting eyelets in three different sizes without flattening the rounded rims. On both edges of the block, there are holes, dimples and circles for curved surfaces. Mount block to a vise when riveting curved surfaces.