Fretz Hammers
-
- Regular price
-
$63.50
- Regular price
-
- Sale price
- $63.50
- Unit price
- per
Texturing Hammer - Sandstone The Fretz Sandstone texturing hammer can be used with overlapping blows resulting in a texture similar in appearance to broken sandstone. This texture can add dramatic... -
- Regular price
-
$65.30
- Regular price
-
- Sale price
- $65.30
- Unit price
- per
Texturing Hammer - Circle Imprints This hammer makes a swirling texture by overlapping the blows. The more the surface is textured, the more dramatic the swirling effect. Made of 420 stainless ste... -
- Regular price
-
$79.75
- Regular price
-
- Sale price
- $79.75
- Unit price
- per
Fretz Texturing Hammer - Raw Silk The Raw Silk Texturing Hammer is a planishing hammer with randomly ground heads that gives the texture of raw silk. Similar to a texture that could be rolled onto ... -
- Regular price
-
$70.20
- Regular price
-
- Sale price
- $70.20
- Unit price
- per
Sharp Texturing and Raising Hammer The Sharp Texturing and Raising Hammer is for rings and other surfaces when sharp parallel hammered textures are needed. It can also be used to make extreme tight... -
- Regular price
-
$50.95
- Regular price
-
- Sale price
- $50.95
- Unit price
- per
Small Embossing Hammer The Small Embossing Hammer is used to form small raised areas by hammering from the inside in preparation for chasing or general shaping. This hammer leaves a very fine dimp... -
- Regular price
-
$65.30
- Regular price
-
- Sale price
- $65.30
- Unit price
- per
Narrow Raising Hammer The Narrow Raising Hammer is for raising is for raising small cylinders and concave shapes. The thinner heads allow the hammer to fit into tighter curves for raising and plani... -
- Regular price
-
$56.00
- Regular price
-
- Sale price
- $56.00
- Unit price
- per
Fretz Wide Raising Hammer The Wide Raising Hammer can be used to raise sheet metal into a bowl against a wooden stake or a metal T-stake. Is is also useful for raising in cylinders to form a conca... -
- Regular price
-
$65.30
- Regular price
-
- Sale price
- $65.30
- Unit price
- per
Planishing Hammer Fretz Planishing Hammer The Planishing Hammer is for smoothing metal. The round side is used if the metal has previous raising hammer marks and these need to be smoothed out. The... -
- Regular price
-
$63.90
- Regular price
-
- Sale price
- $63.90
- Unit price
- per
Forming Stake - Convex/Concave Fretz miniature metalsmithing forming stakes are made of hardened 420 stainless steel and feature highly polished surfaces. The Convex/Concave forming stake features ... -
- Regular price
-
$59.90
- Regular price
-
- Sale price
- $59.90
- Unit price
- per
Forming Stake - Horn Fretz miniature metalsmithing forming stakes are made of hardened 420 stainless steel and feature highly polished surfaces. The Horn forming stake features a concave center wit... -
- Regular price
-
$61.15
- Regular price
-
- Sale price
- $61.15
- Unit price
- per
Fretz Stake Holder Fretz stake holder for Fretz forming stakes. The stake holder can be mounted on a sturdy workbench or wooden block to use the holder in a vise. The advantage of this holder is th... -
- Regular price
-
$57.55
- Regular price
-
- Sale price
- $57.55
- Unit price
- per
Fretz - Maker Small Embossing Hammer The Maker Small Embossing Hammer has two round ends but they are much smaller than the Large Embossing Hammer. The smaller ends make interesting textures on sma... -
- Regular price
-
$40.85
- Regular price
-
- Sale price
- $40.85
- Unit price
- per
Fretz - Maker Large Embossing Hammer The Maker Large Embossing Hammer textures metal with two ball shaped ends of different sizes. The textures can be varied by changing the force of the blow. The... -
- Regular price
-
$57.55
- Regular price
-
- Sale price
- $57.55
- Unit price
- per
Fretz - Maker Narrow Raising Hammer The Maker Narrow Raising Hammer is a crosspein used to sink metal into concave shapes and fit into curves where a round planishing hammer will not fit. The hamme... -
- Regular price
-
$57.55
- Regular price
-
- Sale price
- $57.55
- Unit price
- per
Fretz - Maker Wide Raising Hammer The Maker Wide Raising Hammer is useful for raising small vessels or bowls from flat stock. It is also a forging hammer used to draw out wire or thin sheet metal. ... -
- Regular price
-
$54.95
- Regular price
-
- Sale price
- $54.95
- Unit price
- per
Fretz - Maker Planishing Hammer The Maker Planishing Hammer has a slightly rounded working end for smoothing and hardening metal. The rounded end gives the classic planishing mark found on handwrou... -
- Regular price
-
$293.85
- Regular price
-
- Sale price
- $293.85
- Unit price
- per
Fretz Maker Hammer Set The hammers are ideal for precise, intricate metal work and for creating custom bezels and small vessel forms. Scaled down from the larger Silversmith versions, these hammers... -
- Regular price
-
$64.75
- Regular price
-
- Sale price
- $64.75
- Unit price
- per
Precisionsmith Riveting and Texturing Hammer The Riveting Hammer is useful in riveting pin stems and other cold connections. This hammer has a slightly curved crosspein end; traditionally, it is fl...
Showing 1 -18 of 18 items
- Choosing a selection results in a full page refresh.