Home > Polymer Clay Artists > Everything Else > Chain, Stringing & Bezel Wire >

Patterned Wire - Brass - 3mm Polka Dot 16 gauge Dead Soft - 6"
Patterned Wire - Brass - 3mm Polka Dot 16 gauge Dead Soft - 6"

Please note: This wire is hollow on the back side.

6 Inches: $2.25
Product Dimensions: Highest Point: 16 gauge, 1/8" wire, 3mm 1/2 round

Made in Israel
Creative Reward Points you'll earn: 2

Product Code:


Patterned Wire - 3mm Polka Dot

Use this elegant patterned brass wire to make a gorgeous cuff bracelet in a snap or cut pieces from it for a variety of designs. Co-fire with bronze clay. Can be soldered using low temperature silver solder to incorporate with other brass stampings, settings, sheet metals, etc. View our Low Temperature Soldering demo below for tips.

This product is sold in 6" lengths. Due to variations in patterns, we do not guarantee a complete end to end pattern. If you need a longer length, we can cut into 1 foot or longer sections if available. Please call customer service or simply specify any requirements in the order notes.

Please note: Patterned brass wire is custom cut and is not returnable.

Cool Tip! Logo

Brass can be colored using oxidizing agents, heat, colored pencils, paints, inks, resins, Gilders Paste and other products. Before applying any of these surface treatments, be sure the metal is clean.

The process of manufacturing this brass material leaves oils and residue that should be cleaned off. A good cleaning solution can be made from dish soap, ammonia and water.

Make about 4 cups of solution at a time. 4 cups water, a squirt of dish soap and about 2 tablespoons of ammonia. This will make a potent degreasing solution for brass. Use the toothbrush to get into detailed areas.

Don't forget these...
Mandrel - Ring Mandrel with 360 Degree Vice Smart Vise Silver Solder Paste - Low Temp 1/2oz
Price: $39.95
Price: $53.95
Price: $9.20
360 Degree Mandrel Vise Smartvise Silver Solder Paste - Low Temp