YOU ARE HERE: Home > Metalsmiths > Tools > Vises
Sort by:
Page of 1
Bead & Pearl Holder Bead & Pearl Holder

Use to hold onto beads and pearls while you ream or drill them.

Price: $7.90
Ring Clamp Hardwood Ring Clamp - Hardwood

Use to hold rings and small parts. The wedge is jammed into the open end and tapped on a firm surface to tighten.

Price: $9.60
Peg Assist - Premium Non-slip Ring Clamp Peg Assist - Premium Non-slip Ring Clamp

Use to hold rings and small parts.

Price: $16.65
Economy Tabletop Swivel Vise Economy Tabletop Swivel Vise

3" jaw economy tabletop swivel vise.

Price: $25.20
Premium Hand Held Tube Cutting Jig Premium Hand Held Tube Cutting Jig

Used to hold tubing or rods up to 1/8" diameter while making perfectly straight cuts. Depth setting for repeated lengths.

Price: $29.95
Tube Cutting Jig Tube Cutting Jig - Hand Held

Tube Cutting Jig - Hand Held


Cut tubing perfectly with this handy tube cutter. Cut and bend your own sterling tubes and save. Used to hold tubing during sawing. Depth setting for repeated lengths.

Price: $39.95
Tube Cutting Holder Tube Cutting Holder

Tube Cutting Holder

Attach the tube cutting holder to your bench or held by a bench vise. Slots at the end assure straight cutting and the guide can be set for multiple cuts when doing production work.

Price: $40.20
Mini Max Tube Cutter Rothenberger Mini Max Tube Cutter

Mini Max Tube Cutter

Perfect for large hole rivets! For silver, copper, brass, aluminium, and thin-walled steel pipes. Cuts tube diameters from 3mm (1/8") to 28mm (1-1/8")
  • Handy design with very small working radius (58 mm and/ or 2-1/4") allows for use in hard-to-reach places

  • Effortless pressure control with the large knurled knob and handy design

  • Two guide rollers with recess for cuts near flares
  • Price: $42.95
    Pearl/Bead Drilling Vise Pearl/Bead Drilling Vise

    Make pearl and bead drilling easy with this clever vise.

    Price: $47.80
    Rotrac High Precision Tube Cutter Rothenberger Rotrac High Precision Tube Cutter

    Rotrac High Precision Tube Cutter

    Perfect for large hole rivets! Cut silver, copper, aluminium and thin wall stainless steel. Cuts tube diameters from 3mm (1/8") to 28mm (1-1/8")
  • Constant working radius
  • Wide rollers
  • Fold away reamer
  • Cast aluminium design
  • Protection of the cutter wheel with the rolling stop
  • Retractable internal deburrer and spare cutter wheel in handle
  • Protected screw spindle protection against dirt and jamming
  • Price: $50.85
    Miter Cutting Vise Miter Cutting Vise

    This miter vise is used for holding wire and sheet up to 11mm wide at both 45 degrees and 90 degrees.

    Price: $54.00