YOU ARE HERE: Home > Metalsmiths > Tools > Stone Setting
Sort by:
Page of 1
45 Degree Hart Bur 2mm 45 Degree Hart Bur 2mm

45 Degree Hart Bur 2mm

Made of the finest Swiss-milled Vanadium steel for long life and accuracy. This bur is 1-3/4" long with a 3/32" shank.

Price: $2.95
45 degree Hart Bur 1.5mm 45 Degree Hart Bur 1.5mm

45 Degree Hart Bur 1.5mm

Made of the finest Swiss-milled Vanadium steel for long life and accuracy. This bur is 1-3/4" long with a 3/32" shank.

Price: $2.95
45 Degree Hart Bur 1mm 45 Degree Hart Bur 1mm

45 Degree Hart Bur 1mm

Made of the finest Swiss-milled Vanadium steel for long life and accuracy. This bur is 1-3/4" long with a 3/32" shank.

Price: $3.15
45 Degree Hart Bur 3mm 45 Degree Hart Bur 3mm

45 Degree Hart Bur 3mm

Made of the finest Swiss-milled Vanadium steel for long life and accuracy. This bur is 1-3/4" long with a 3/32" shank.

Price: $4.30
Stone Setting Bur 1mm Stone Setting Bur - 1mm

Use to cut a seat for a faceted round stone in metal or greenware. Made of the finest Swiss-milled Vanadium steel for long life and accuracy. Overall length is 44.5mm with 3/32" shank.

Price: $6.50
45 degree Hart Bur 4mm 45 Degree Hart Bur 4mm

45 Degree Hart Bur 4mm

Made of the finest Swiss-milled Vanadium steel for long life and accuracy. This bur is 1-3/4" long with a 3/32" shank.

Price: $6.70
Stone Setting Bur 2mm Stone Setting Bur - 2mm

Stone Setting Bur - 2mm

Use these burs to cut a seat for faceted stones in bone dry clay. Cuts very easily by hand with a few turns, or put in a pin vise for a better grip. First drill a pilot hole for an azure (a light hole) and then cut the seat with the bur. Stone table should sit below the surface by a small amount so the clay shrinks around the girdle. Choose the bur that matches the stone size you wish to set. To set stones in fired metal, install bur in a flex shaft and lubricate with Cut Lube and slow speed. Top quality burs should be treated with care. Do not overheat with high speed or the bur will lose it's ability to cut.

Price: $6.75
Agate Burnisher Agate Burnisher

Agate Burnisher

The agate burnisher can be used to burnish metal clay after firing, but is especially useful for the keum boo technique of applying gold foil to silver. Sturdy wood handle stays cool while burnishing at bonding temperatures. Beautifuly handcrafted.

Price: $7.35
Stone Setting Bur 3mm Stone Setting Bur - 3mm

Stone Setting Bur - 3mm

Use these burs to cut a seat for faceted stones in bone dry clay. Cuts very easily by hand with a few turns, or put in a pin vise for a better grip. First drill a pilot hole for an azure (a light hole) and then cut the seat with the bur. Stone table should sit below the surface by a small amount so the clay shrinks around the girdle. Choose the bur that matches the stone size you wish to set. To set stones in fired metal, install bur in a flex shaft and lubricate with Cut Lube and slow speed. Top quality burs should be treated with care. Do not overheat with high speed or the bur will lose it's ability to cut.

Price: $9.95
Stone Setting Bur 4mm Stone Setting Bur - 4mm

Stone Setting Bur - 4mm

Use these burs to cut a seat for faceted stones in bone dry clay. Cuts very easily by hand with a few turns, or put in a pin vise for a better grip. First drill a pilot hole for an azure (a light hole) and then cut the seat with the bur. Stone table should sit below the surface by a small amount so the clay shrinks around the girdle. Choose the bur that matches the stone size you wish to set. To set stones in fired metal, install bur in a flex shaft and lubricate with Cut Lube and slow speed. Top quality burs should be treated with care. Do not overheat with high speed or the bur will lose it's ability to cut.

Price: $10.25
Stone Setting Bur 5mm Stone Setting Bur - 5mm

Stone Setting Bur - 5mm

Use these burs to cut a seat for faceted stones in bone dry clay. Cuts very easily by hand with a few turns, or put in a pin vise for a better grip. First drill a pilot hole for an azure (a light hole) and then cut the seat with the bur. Stone table should sit below the surface by a small amount so the clay shrinks around the girdle. Choose the bur that matches the stone size you wish to set. To set stones in fired metal, install bur in a flex shaft and lubricate with Cut Lube and slow speed. Top quality burs should be treated with care. Do not overheat with high speed or the bur will lose it's ability to cut.

Price: $11.25
Stone Setting Bur 6mm Stone Setting Bur - 6mm

Stone Setting Bur - 6mm

Use these burs to cut a seat for faceted stones in bone dry clay. Cuts very easily by hand with a few turns, or put in a pin vise for a better grip. First drill a pilot hole for an azure (a light hole) and then cut the seat with the bur. Stone table should sit below the surface by a small amount so the clay shrinks around the girdle. Choose the bur that matches the stone size you wish to set. To set stones in fired metal, install bur in a flex shaft and lubricate with Cut Lube and slow speed. Top quality burs should be treated with care. Do not overheat with high speed or the bur will lose it's ability to cut.

Price: $12.10
Peg Assist - Premium Non-slip Ring Clamp Peg Assist - Premium Non-slip Ring Clamp

Use to hold rings and small parts.

Price: $16.65
Deluxe Swiss Tungsten Vanadium Round Burs Deluxe Swiss Tungsten Vanadium Round Burs

Deluxe Swiss Tungsten Vanadium Round Burs

Made of the finest Swiss-milled Vanadium steel for long life and accuracy. This set includes 0.8, 0.9, 1, 1.5, 1.8, 2.1, 2.5, 2.9, 3.5, 4, 4.5, and 5mm burs. Each bur is 1-3/4" long with a 3/32" shank.

Set of 12: $28.20
Stone Setting Bur Set Stone Setting Bur Set

Use to cut a seat for a faceted round stone in metal or greenware. Made of the finest Swiss-milled Vanadium steel for long life and accuracy. Overall length is 44.5mm with 3/32" shank.

Set of 6: $37.20
Deluxe Swiss Tungsten Vanadium 45 degree Hart Burs Deluxe Swiss Tungsten Vanadium 45 degree Hart Burs

Deluxe Swiss Tungsten Vanadium 45 degree Hart Burs

Made of the finest Swiss-milled Vanadium steel for long life and accuracy. This set includes 0.9, 1, 1.2, 1.4, 1.5, 1.8, 2.1, 2.3, 2.5, 2.7, 2.9, and 3.1mm burs. Each bur is 1-3/4" long with a 3/32" shank.

Set of 12: $37.80
Deluxe Swiss Tungsten Vanadium Setting Burs Deluxe Swiss Tungsten Vanadium Setting Burs

Deluxe Swiss Tungsten Vanadium Setting Burs

Made of the finest Swiss-milled Vanadium steel for long life and accuracy.

This set includes 1, 1.2, 1.5, 1.7, 2, 2.2, 2.5, 3, 3.5, 4, 4.5, and 5mm burs. Each bur is 1-3/4" long with a 3/32" shank.

Set of 12: $45.50
Pearl/Bead Drilling Vise Pearl/Bead Drilling Vise

Make pearl and bead drilling easy with this clever vise.

Price: $47.80