Home > Enamelists > Firing > Kiln Accessories >

Kiln Accessory - Firefly Digital Pyrometer
Kiln Accessory: Firefly Digital Pyrometer


 
Enjoy digital accuracy on a modest budget. Although designed as a replacement pyrometer for Firefly manual kiln models, we use this pyrometer to check the accuracy of all of our kilns. As kilns age, temperatures can often read different than actual temps inside your kiln. Use this tool to measure the accuracy of your kiln to ensure you do not over or under fire your metal clay, glass or enamels.

The DT2-7 digital pyrometer measures kiln temperature for improved firing results. With the DT2-7 you can fire copper enameling, control the cooling rate of difficult glazes, or know when to begin monitoring glass in a switch-operated kiln. The liquid crystal display is easy to read even in bright daylight. This reliable hand-held pyrometer weighs only 5 ounces and measures in degrees F up to 1999F. (To measure temperatures above 1999F, order the degrees C meter version. The C meter version ships directly from the manufacturer and can take up to 2 weeks to ship via UPS) Replace the Type-K thermocouple in seconds with a simple plug-in connection. The on-off switch saves battery life. The plastic display case is rated for a room temperature of 32 – 122 degrees F.
Price: $156.00
Product Dimensions: 5-1/4" x 2-1/4"
Made in USA
Creative Reward Points you'll earn: 156


Product Code: KLN-406
Qty:

Details
 

Kiln Accessory - Firefly Digital Pyrometer

DT2-7 SPECIFICATIONS

   * Dimensions: 2 3/4” wide x 4 1/4” high x 1” thick
   * 1/2” liquid crystal display digits
   * Low power consumption
   * Measurement range: -50F – 1999F
   * Environmental operating temperature: 32F – 122F
   * Degrees F display
   * Type-K thermocouple with 5’ of wire
   * Requires 9 volt DC battery
   * Battery life: 150 – 200 hours of continuous use
   * Low battery indicator message
   * Weight: 5 oz.
   * Warranty: 90 days