To use the template on polymer, metal or ceramic clay, place a plain or textured slab on a Tuff Card or other worksurface. You can safely rest your fingers on the template to hold it in place. Cut out the shape
with our Ultra Clay Pick or a very fine needle tool. Start at the outside corners and cut to the inside corners for the cleanest cuts. Remove the template and lift away the excess clay.
For use
on sheet metal, use a Scotchbrite pad to give the surface a soft satin
finish, then use a scribe to scratch the shape onto metal. China white
can also be used to paint on a white surface, or another method is to
cover the metal surface with a label, then trace the shape with a
sharpie. It's easier to see it this way and helps with more accurate
cutting.