Home > Tools & Equipment >

Design Stamp - Crown 6mm
Design Stamp - Crown Design 6mm

Pkg of 1: $9.00
Product Dimensions: 3/8" x 2-1/2" Face: 6mm
Made in China
Creative Reward Points you'll earn: 9

Product Code:


Design Stamp - Crown 6mm

to stamp the image into brass, copper, bronze, silver or clayAll of our design stamps (punches) are made from heat-treated tool grade steel. To work successfully with design stamps and punches, place the metal you want to stamp on a hardened steel bench block. The bench block must be on a firm flat surface. Do not use a sand bag or any other padding below. The bench block needs to rest directly on a flat hard surface. Hold the punch perfectly straight. Use a 16 oz utility hammer to hit the end of the stamp. Ideally the impression should be made with one blow. Practice with copper until you can get a good impression with one blow.

Don't forget these...
Design Stamp - Diamond 6mm Hammer - ImpressArt - Metal Stamping Design Stamp - "Cheer" Megaphone 6mm ImpressArt Simple Strike Jig - 6mm
Pkg of 1: $9.00
Price: $20.00
Pkg of 1: $9.00
Pkg of 1: $12.00
Design Stamp - Diamond Design 6mm Hammer | ImpressArt - Metal Stamping Design Stamp - "Cheer" Megaphone Design 6mm Impress Art Simple Strike Jig - 6mm