Home > Tools & Equipment > Cool Tools Clearance > Design Stamps >

Design Stamp - 3D Cross 6 mm
Design Stamp - 3D Cross 6 mm


 
Additional Photos:



Pkg of 1: $6.90
New Price: $5.75
Product Dimensions: 5/16" x 2-7/8" Face: 6mm
Made in China
Creative Reward Points you'll earn: 6


Product Code:
PUN-357
Qty:

Details
 

Design Stamp - 3D Cross 6 mm

Use to stamp the image into brass, copper, bronze, silver or clay. All of our design stamps (punches) are made from heat-treated tool grade steel. To work successfully with design stamps and punches, place the metal you want to stamp on a hardened steel bench block. The bench block must be on a firm flat surface. Do not use a sand bag or any other padding below. The bench block needs to rest directly on a flat hard surface. Hold the punch perfectly straight. Use a 16 oz utility hammer to hit the end of the stamp. Ideally the impression should be made with one blow. Practice with copper until you can get a good impression with one blow.