Home > Tools & Equipment > Drills & Burs >

Cup Bur - Wire Rounding
Cup Bur - Wire Rounding


 

Before forming wire, take a moment to round the end using a cup bur. This is especially important on the end of an ear wire to clean up the ragged cut end. Use in a swivel pin vice or in a rotary hand tool. Also, use on balled wire rivets to clean up the head. Use Cut Lube on the bur to keep it cool. To use by hand, insert the bur in a pin vice, place the cup over the wire end and twist in a clockwise direction several turns. Inspect the end of the wire using magnification. If the wire is not cleanly rounded, give a few more twists.


Made in Germany.

Cup Bur - Wire Rounding



Item# Item Name Price: Qty
DRL-349 Cup Bur - Wire Rounding - 0.8mm
$3.10
DRL-350 Cup Bur - Wire Rounding - 1.2mm
$3.10
DRL-351 Cup Bur - Wire Rounding - 1.8mm
$3.50
DRL-352 Cup Bur - Wire Rounding - 2mm
$4.00
DRL-353 Cup Bur - Wire Rounding - 3mm
$5.50
DRL-354 Cup Bur - Wire Rounding - 4mm
$7.40
DRL-355 Cup Bur - Wire Rounding - 5mm
$7.40
Check the items you wish to purchase, then click 'Add Qty to Cart'