Project Video - Creating Sketch Designs in Fine Silver Clay by Jennifer Dins
-
- Regular price
-
$21.80 - $128.00
- Regular price
-
- Sale price
- $21.80
- Unit price
- per
Art Clay Silver Clay Kiln Fire: 1200°F / 650°C - 30 minutes Torch Fire: Red Glow for 5 minutes Shrinkage: 8-12% Consists of pure silver particles, binding agent and water. The binding agent is p... -
- Regular price
-
$2.50 - $13.95
- Regular price
-
- Sale price
- $2.50
- Unit price
- per
Cool Tools Clay Hydrator Never be limited again by dried out clay! The Cool Tools Clay Hydrator keeps your metal clay moist and workable for months on end. Keep your clay in the hydrator during the... -
- Regular price
-
$64.25
- Regular price
-
- Sale price
- $64.25
- Unit price
- per
360° Rotating Soldering Pan This 12 inch soldering pan rotates 360º with easy access. The heat reflecting pumice is perfect for supporting your project in any position - flat or embedded. This pan... -
- Regular price
-
$66.05
- Regular price
-
- Sale price
- $66.05
- Unit price
- per
Fume Extractor Lead-free solder has created a healthier environment, but the more active fluxes required to be used with it give off more fumes. Remove flux fumes from soldering workbench by drawin... -
- Regular price
-
$49.95
- Regular price
-
- Sale price
- $49.95
- Unit price
- per
Torch - Stingray - Blue Heats to 2500°F. Use for metal clay firing and small soldering jobsA powerful, portable butane refillable torch. The Stingray features a high quality anodized finish, gas fl... -
- Regular price
-
$10.95
- Regular price
-
- Sale price
- $10.95
- Unit price
- per
CoolSlip Anti-Stick Solution Cool Tools CoolSlip is the must have product for metal clay and one of our best sellers. Spray lightly on textures and tools before use for crisp, stick-free impression... -
- Regular price
-
$49.35
- Regular price
-
- Sale price
- $49.35
- Unit price
- per
Jewelry Finishing Mix - Stainless Steel Shot - 1lb Our stainless steel shot is a mix of pins, cones, rounds and cuts. All these shapes are necessary for a good polish. Avoid mixes without pins. Pin... -
- Regular price
-
$124.95
- Regular price
-
- Sale price
- $124.95
- Unit price
- per
Lortone® Tumbler - 3lb Rotary - 120V (US) Lortone tumblers are designed to handle the weight of stainless steel shot and are used widely in the jewelry industry, so you can depend upon this machine... -
- Regular price
-
$11.05
- Regular price
-
- Sale price
- $11.05
- Unit price
- per
Agate Burnisher The agate burnisher can be used to burnish metal clay after firing. Use for a final polish to bezels. Especially useful for the keum boo technique of applying gold foil to silver. S... -
- Regular price
-
$11.40
- Regular price
-
- Sale price
- $11.40
- Unit price
- per
Kiln Shelf - Ceramic Fiber 6" x 6" x 1/2" Ready to use for soldering and torch firing. To use as a kiln shelf, first burn out the binders by firing the board alone at 1000°F for one minute. Leave ... -
- Regular price
-
$7.20 - $32.40
- Regular price
-
- Sale price
- $7.20
- Unit price
- per
3M Sponge Sanding Pads Use to refine metal clay greenware and finish all metals.These pads work especially well for shaping unfired dry metal clay. This is a full sized pad measuring 4-1/2" x 5-1/2... -
- Regular price
-
$3.45
- Regular price
-
- Sale price
- $3.45
- Unit price
- per
Polishing/Finishing Sticks - Set of 6 Use to refine metal clay and reach any small crevice. These handy tools make it easy and convenient to smooth your clay pieces while in the greenware state. Th... -
- Regular price
-
$25.50
- Regular price
-
- Sale price
- $25.50
- Unit price
- per
Royal Soft-Grip™ Rounds 5 Piece Brush Set Comfort meets function in this selection of appealing and durable brushes that feature the original no-slip soft rubber grip on its clear acrylic handle. S... -
- Regular price
-
$5.65
- Regular price
-
- Sale price
- $5.65
- Unit price
- per
Work Surface & Snake Maker - Acrylic - Narrow These little work surfaces are so handy! Perfect for polymer clay and metal clay. This 3" x 6" product has been reduced in size one inch in width t... -
- Regular price
-
$12.85 - $24.95
- Regular price
-
- Sale price
- $12.85
- Unit price
- per
The Clayboard by Cool Tools offers a smooth non-stick surface that metal clay and polymer clay won't stick to. The board features non-skid feet so your work is up off the table and the board stays ... -
- Regular price
-
$9.95
- Regular price
-
- Sale price
- $9.95
- Unit price
- per
Tuff Cards Non-stick Project Cards 2.5" x 3.5" - Set of 3 - Black Tuff Cards are thick non-stick cards used to create, assemble and dry metal clay projects. They are thicker than a standard playing... -
- Regular price
-
$178.00
- Regular price
-
- Sale price
- $178.00
- Unit price
- per
Clay Dehydrator - Excalibur 2400 Use this dehydrator to speed the drying process of your clay. Gentle, controllable heat is perfect for drying your creations. We use this exact type of food dehydra... -
- Regular price
-
$6.30
- Regular price
-
- Sale price
- $6.30
- Unit price
- per
Multi-Purpose Artist Container - Glass This container features an indented design that allows placement of your paint brush across the top in between use. -
- Regular price
-
$10.10
- Regular price
-
- Sale price
- $10.10
- Unit price
- per
Clay Scraper Set - Steel Use this handy tool to quickly lift or scrape clay from your work surface. Use to mix dry clays or create flexible clay by adding glycerin. Cut wet clay with the straight e...
Showing 1 -19 of 19 items
- Choosing a selection results in a full page refresh.