 |
Cernit Varnish - Matt 30ml
Finish and protect your polymer clay jewelry with Cernit varnish.
Water-based varnish, transparent after drying
Resistant to plasticizers
Resistant to water (becomes a bit white, but will turn transparent again after re-drying)
Very resistant to scratches
Directions:
After baking of the polymer clay, clean the item thoroughly with alcohol
Apply 2-3 coats of varnish (allowing a drying time of one hour between each application)
When varnish is dry to the touch, bake it in a preheated oven for 15 minutes at 230°F/110°C
48 hours cooling needed for a maximum hardness
Clean up with water
|
|
|