Cool Tools Brand Products
Tools & Equipment
Findings, Leather & Wire
Kilns & Firing
Cool Tools Blog
Brass Rod is an exciting material for creating a variety of jewelry pieces. Rod is available in a variety of lengths and low gauges. It can be cut, formed, soldered, textured, polished and patinaed in several ways, to open up a world of possibilities while creating. Rod can be used to make perfect ring shanks, and stunning bracelets. The rod can be formed easily on a steel mandrel with a raw-hide mallet, or with ring-forming pliers.
Larger bracelets take a bit more solder. The best way to solder your bracelet is on a piece of fiber board. Cut a piece of solder about the width of your bracelet. Place your solder on the board, and set the joint of your bracelet directly over it. Using hard solder is recommended if youíre going to be doing a lot of forming or texturing with your piece. This will provide a little added strength to make sure you donít break the seam. With your torch, pull the solder up into the joint for a perfect connection.
You can add any texture you wish in a variety of ways. Hammering on a steel mandrel is a simple way to add some detail. Adding some texture puts your own unique touch on the ring or bracelet.
Watch our video below and get to know the possibilities with our brass and copper rod.
Brass Rod 16 Gauge - 5-1/2 Inches
Brass Rod 16 Gauge - 6 Inches
Brass Rod 16 Gauge - 6-1/2 Inches
Brass Rod 12 Gauge - 5 Inches
Brass Rod 12 Gauge - 7 Inches
Brass Rod 12 Gauge - 7-1/2 Inches
Brass Rod 12 Gauge - 8 Inches
Brass Rod 6 Gauge - 5-1/2 Inches
Brass Rod 6 Gauge - 6 Inches
Brass Rod 6 Gauge - 6-1/2 Inches
Brass Rod 6 Gauge - 7 Inches
Brass Rod 6 Gauge - 7-1/2 Inches
Brass Rod 4 Gauge - 6-1/2 Inches
(Out of Stock)
Brass Rod 3 Gauge - 6 Inches
Brass Rod 3 Gauge - 6-1/2 Inches
Brass Rod 2 Gauge - 6 Inches
(Out of Stock)
Check the items you wish to purchase, then click 'Add Qty to Cart'
Don't forget these...
Pliers - Forming - Ring Bending
Bench Block - Rubber
Annealing Pan with Pumice - 7" diameter
Miter Cutting Vise
Mandrel - Bracelet - Steel - Oval Tapered
Jewelers Saw - German
Torch - Micro-Torch