Directions
*Wear appropriate gloves.
1. Wear disposable gloves to measure equal parts of A & B. Always retrieve parts A & B with different tools.
2. Mix & knead together for 2 minutes until thoroughly combined and a uniform color is achieved. Note: incomplete mixing will give poor results. *Allow mixed product to rest 5 minutes for better handling.
3. Apoxie® Sculpt is ready to use; working time is 1- 3 hours. Shape as desired. Smooth or texture with a wet finger, brush, Q-tip or sculpting tool. Self-hardens (NO?BAKING); 24 hour full cure.
4. Clean up: soap & water or Aves® Safety Solvent (very helpful for smoothing, removing finger prints & cleaning up pigment / product residue before set-up). Finish as desired. Paint wet or dry. Marine & Exterior Quality!
*Wear protective gloves [e.g., nitrile or equivalent] when combining parts A and B. Wear a dust mask and safety glasses when sanding cured product.
*Keep out of reach of children.
*Safe for adults when used as directed.
*24 hr. full cure required for hard finishing purposes such as sanding, carving, drilling, machining, etc., without chipping, cracking or flaking.
*Keep containers sealed when not in use. Freeze-Thaw-Stable.
Apoxie Sculpt is GHS & Prop 65 Complient:
WARNING – May cause an allergic skin reaction and eye irritation. Hazard Statements – H317 May cause an allergic skin reaction. H320 Causes eye irritation. Apoxie® Sculpt Conforms to Safety Standard ASTM International D4236.
Working Time Line Guide:
1/2 hour: Sticky & most adhesive
1 to 2 hours: Easy to work with
2 to 3 hours: Setting up, form-able detail
24 hours: Hard, cured & waterproof