In the tool demo below, learn about high quality Fretz hammers, and learn how there's a perfect tool, for every job. Fretz hammers are the best quality jeweler's hammers, and each one is specifically designed to make your designing easier. Each hammer features a head made of 420 stainless steel, and beautiful handles made from Padauk wood. These hammers are light weight, yet strong and very versatile.
Texturing Hammer - Sandstone
The Fretz Sandstone texturing hammer can be used with overlapping blows resulting in a texture similar in appearance to broken sandstone. This texture can add dramatic...
Texturing Hammer - Circle Imprints
This hammer makes a swirling texture by overlapping the blows. The more the surface is textured, the more dramatic the swirling effect. Made of 420 stainless ste...
Fretz Texturing Hammer - Raw Silk
The Raw Silk Texturing Hammer is a planishing hammer with randomly ground heads that gives the texture of raw silk. Similar to a texture that could be rolled onto ...
Sharp Texturing and Raising Hammer
The Sharp Texturing and Raising Hammer is for rings and other surfaces when sharp parallel hammered textures are needed. It can also be used to make extreme tight...
Small Embossing Hammer
The Small Embossing Hammer is used to form small raised areas by hammering from the inside in preparation for chasing or general shaping. This hammer leaves a very fine dimp...
Narrow Raising Hammer
The Narrow Raising Hammer is for raising is for raising small cylinders and concave shapes. The thinner heads allow the hammer to fit into tighter curves for raising and plani...
Fretz Wide Raising Hammer
The Wide Raising Hammer can be used to raise sheet metal into a bowl against a wooden stake or a metal T-stake. Is is also useful for raising in cylinders to form a conca...
Planishing Hammer
Fretz Planishing Hammer
The Planishing Hammer is for smoothing metal. The round side is used if the metal has previous raising hammer marks and these need to be smoothed out. The...
Forming Stake - Convex/Concave
Fretz miniature metalsmithing forming stakes are made of hardened 420 stainless steel and feature highly polished surfaces.
The Convex/Concave forming stake features ...
Forming Stake - Horn
Fretz miniature metalsmithing forming stakes are made of hardened 420 stainless steel and feature highly polished surfaces.
The Horn forming stake features a concave center wit...
Fretz Stake Holder
Fretz stake holder for Fretz forming stakes. The stake holder can be mounted on a sturdy workbench or wooden block to use the holder in a vise. The advantage of this holder is th...
Fretz - Maker Small Embossing Hammer
The Maker Small Embossing Hammer has two round ends but they are much smaller than the Large Embossing Hammer. The smaller ends make interesting textures on sma...
Fretz - Maker Large Embossing Hammer
The Maker Large Embossing Hammer textures metal with two ball shaped ends of different sizes. The textures can be varied by changing the force of the blow. The...
Fretz - Maker Narrow Raising Hammer
The Maker Narrow Raising Hammer is a crosspein used to sink metal into concave shapes and fit into curves where a round planishing hammer will not fit. The hamme...
Fretz - Maker Wide Raising Hammer
The Maker Wide Raising Hammer is useful for raising small vessels or bowls from flat stock. It is also a forging hammer used to draw out wire or thin sheet metal. ...
Fretz - Maker Planishing Hammer
The Maker Planishing Hammer has a slightly rounded working end for smoothing and hardening metal. The rounded end gives the classic planishing mark found on handwrou...
Fretz Maker Hammer Set
The hammers are ideal for precise, intricate metal work and for creating custom bezels and small vessel forms. Scaled down from the larger Silversmith versions, these hammers...
Precisionsmith Riveting and Texturing Hammer
The Riveting Hammer is useful in riveting pin stems and other cold connections. This hammer has a slightly curved crosspein end; traditionally, it is fl...
Showing 1 -18 of 18 items
Choosing a selection results in a full page refresh.