The heart of the kiln is the reliable Sentry Xpress 3-button digital controller with 5 speed settings and 4 program settings. The speed settings are single segment ramp/hold programs. A single segment ramp/hold program is a lot simpler than it sounds; it simply heats to a target temperature, holds that temperature for the specified amount of time and then shuts itself off. Watch our kiln programming video below to see how easy it is to use the Sentry Xpress controller.
The SC1 plugs into a 3-prong household outlet and draws only 600
watts, which equates to about 2 cents per hour to operate. Place the SC1
on a counter top or table without worry; the surface the kiln sits on
will not heat during firing thanks to the elevated firing box.
Double-walled construction keeps the outside case cool, even at extended
firing times. The SC series kilns are simply the best choice for
reliability and ease of use for firing precious metal clay. Paragon
kilns are well engineered, well built and a great value for the price
considering these are digitally controlled precision heating chambers
that can be used in your home safely and give you years of reliable
service. We normally stock this item and will ship immediately
from our warehouse in Wisconsin. If we are out of stock, the kiln will
ship from Texas. Paragon usually ships within 1 week but it can take as
long as 4 weeks during peak times.
View our programming video
to learn how easy it is to operate the kiln using the 3-button digital
controller. When your kiln arrives, call us at 888-478-5060 for setup
assistance should you need it. We'll have you up and running in minutes.
|