- 5-1/4" x 2-1/2" hard ceramic kiln shelf used when firing glass,
ceramics, metal clay, and enamels
- Set of 4 1/2" high kiln posts. Used to elevate a kiln shelf or firing vessel for even heating and to separate kiln shelves during firing.
SC1 plugs into a 3-prong household outlet and draws 600 watts. Hourly cost to operate on average: 6 cents. Kiln Location
Place the SC3 on a
counter top or table without worry; the surface will
not heat during firing thanks to the elevated firing box. Double-walled
construction keeps the outside case cool, even at extended firing times.Maintenance
Your kiln will give you years of trouble-free service as long as you are good to it. Keep the inside clean, don't gouge the fiber walls, don't fire directly on the floor, etc. The Paragon SC1 kiln has a ceramic fiber interior with the heating
elements embedded and protected within the shell. The
heating elements have a lifespan that is use-dependent, and for most
people, will last for years. When it is time to replace the heating elements, the ceramic fiber shell, called a muffle, is replaced.
The kiln is warrantied to be free of defects in workmanship for a period of 1 year from date of shipment. Manufacturer will repair or replace any parts that become defective under normal and proper use during the specified period.Entire warranty can be read here
Standard colors normally ship 1 week from order, but can take up to 2 weeks during promotions and holidays. Please allow at least 2 weeks time for your customized kiln to be built and shipped. When your kiln arrives, call us at 888-478-5060 for setup assistance if you need it. We'll have you up and running in minutes.
This model can be ordered in different voltages for destinations outside the United States. Please contact us
to place a special order.
View our video (below) to learn how
easy it is to operate a Paragon kiln using the 3-button digital controller.
ManualsSentry Xpress 4.0 Digital ControllerParagon SC Series Kiln Owners Manual
We can help! Check out our resources for helping you choose the right kiln for your studio.