 |
|
|
| | Uses |
This form is excellent for highlighting details and texture. The shrink factor can be used as a design device to scale down larger forms. This version can be used to craft any type of item, but is not recommended for making rings. This version does not have the strength to hold up to the abuse that rings are subjected to and break easily. I avoid soldering PMC Standard. If you do solder this version, the area to be soldered must be burnished well. Be aware that it requires a huge amount of solder, about 4 times the normal amount, and you need to remove the flame the moment the solder starts to flow, leaving a lump of what I call solder slobber. Consider using a cold connection or embed and re-fire with other forms of PMC to incorporate it into a design. |
| Workability |
PMC Original stays moist longer than the other formulations, which gives a longer working time, but be sure to keep any unused portions tightly sealed from air because all metal clay (except paper form) dries very quickly when exposed to air. |
| Embedded Objects |
Any object that can withstand the firing temperatures and times of PMC Standard can be embedded and fired in place. Some natural gemstones, lab gems, cubic zirconia and porcelain can be used. |
| Firing Options |
|
Temperature |
Hold Time |
| Kiln |
1650F |
2 hours |
| Torch |
Not Recommended |
|
|
|
|
|
|
|
