Call Toll Free: 1-888-478-5060
View Shopping Bag
Like Us on Facebook!

  Home > Metal Clay >

  PMC 3 - 50 gram Precious Metal Clay
PMC 3 - 50 gram Precious Metal Silver Clay

Lump Form - PMC 3

This product is 85% fine silver and 15% binder by weight. This variety shrinks 12-15% during firing. The metal particles in this version are smaller than those in PMC Standard and PMC+, which allows higher metal content and therefore less shrinkage.

The firing times can be as little as 10 minutes.

Price: $97.30
Product Dimensions: 50 gram - silver

Made in Japan
Creative Reward Points you'll earn: 97

Stock Status: In Stock

Product Code: PMC-505

Can be fired as low at 1110F. Can be torch fired in 2 minutes. Final product is .999 fine silver.

Uses This form sinters more solidly than the original version and results in a stronger final product. This version can be used to craft any type of item, and it is especially recommend for rings. When fired at the highest temperature (1650F), it produces the strongest final product. It must be burnished well before soldering and uses surprisingly more solder than sheet or wire forms of sterling silver.
Workability PMC3 dries more quickly than PMC Standard, so care must be taken to quickly remove and save scraps. Unused clay should be kept tightly sealed so that no air can contact it.
Embedded Objects Any object that can withstand the firing temperatures and times of PMC3 can be embedded and fired in place. Some natural gemstones, lab gems and cubic zirconia's can be used, as well as dichroic glass and porcelain. Findings and some types of glass can also be embedded when fired at the lowest temperature.
Firing Options
Temperature Hold Time
Kiln 1650F
10 min
30 min
10 min
20 min
30 min
30 min
Torch Red Glow 2 min

Don't forget these...
Slik 3.5 oz Metal Clay Conditioner and Release Cool Tools Clayboard Non-Stick Rolling Surface 9" x 9" Ultra Clay Pick
Price: $12.50

Price: $21.45

Price: $12.50

Slik 3.5 oz Metal Clay Conditioner and Release Ultra Clay Pick