Call Toll Free: 1-888-478-5060
View Shopping Bag
Like Us on Facebook!

  Home > Tools & Equipment > Metal Stamping > Design Stamps > Show All Design Stamps >

  Design Stamp - Peace Dove
Design Stamp - Peace Dove

Additional Photos:

All of our Design Stamps (punches) are made from heat-treated tool grade steel. To work successfully with Design Stamps and punches, place the metal you want to stamp on a hardened steel bench block. The bench block must be on a firm flat surface. Do not use a sand bag or any other padding below. The bench block needs to rest directly on a flat hard surface. Hold the punch perfectly straigh. Use a 16 oz utility hammer to hit the end of the stamp. Ideally the impression should be made with one blow. Practice with copper until you can get a good impression with one blow.
Price: $6.90
Product Dimensions: 5/16" x 2-7/8" Face: 6mm
Made in China
Creative Reward Points you'll earn: 7

Stock Status: In Stock

Product Code: PUN-349

Use to stamp the image into brass, copper, bronze or silver sheet metal or blanks. Can also be used to design in metal clay and other soft clays.