Call Toll Free: 888.478.5060
View Shopping Bag
Like Us on Facebook!

  Home > Tools & Equipment > Metal Stamping >

  Design Stamp - Kokopelli
Design Stamp - Kokopelli


 
Additional Photos:



All of our Design Stamps (punches) are made from heat-treated tool grade steel. To work successfully with Design Stamps and punches, place the metal you want to stamp on a hardened steel bench block. The bench block must be on a firm flat surface. Do not use a sand bag or any other padding below. The bench block needs to rest directly on a flat hard surface. Hold the punch perfectly straigh. Use a 16 oz utility hammer to hit the end of the stamp. Ideally the impression should be made with one blow. Practice with copper until you can get a good impression with one blow.
Price: $6.73
Product Dimensions: 5/16" x 2-7/8"
Inside Dimensions: Face Size: 6mm
Made in China
Creative Reward Points you'll earn: 7

Stock Status: In Stock

Product Code: PUN-350
Qty:

Details
 
Use to stamp the image into brass, copper, bronze or silver sheet metal or blanks. Can also be used to design in metal clay and other soft clays.