Cool Tools Brand Products
Tools & Equipment
Findings, Leather & Wire
Kilns & Firing
Cool Tools Blog
Bronze Rod 0 Gauge - 10 Inches
Bronze Rod is an exciting material for creating a variety of jewelry pieces. Cool Tools sells rod in a variety of lengths and low gauges. It can be cut, formed, soldered, textured, polished and patinaed, in several ways, to open up a world of possibilities while creating. Rod can be used to make perfect ring shanks, and stunning bracelets. The rod can be formed easily on a steel mandrel with a raw-hide mallet, or with ring-forming pliers.
Watch our video below and get to know our Brass, Bronze and Copper rod featuring thick gauges for creating all sorts of breathtaking jewelry.
0 gauge. 10 Inches
Creative Reward Points you'll earn:
Stock Status: In Stock
Add to cart
Features & Videos
The Brass, Bronze and Copper rod can be cut easily with a jewelers saw. Our miter cutting vise makes it even easier to make a flush cut and to file.
Larger bracelets take a bit more solder. The best way to solder your bracelet is on a piece of fiber board. Cut a piece of solder about the width of your bracelet. Place your solder on the board, and set the joint of your bracelet directly over it. Using hard solder is recommended if youíre going to be doing a lot of forming or texturing with your piece. This will provide a little added strength to make sure you donít break the seam. With your torch, you pull the solder up into the joint for a perfect connection.
You can add any texture you wish in a variety of ways. Hammering on a steel mandrel is a simple way to add some detail. Adding some texture puts your own unique touch on the ring or bracelet.