Call Toll Free: 1-888-478-5060
View Shopping Bag
Like Us on Facebook!

  Home > Findings, Leather & Wire > Brass Findings and Charms > Brass Connectors & Links >

  Brass Stamping - Tiara Connector Pkg - 10
Brass Stamping - Tiara Connector Pkg - 10

This beautiful raw brass element was stamped using the original vintage die and press in use since 1904 in a factory that has been producing stampings and jewelry findings for 4 generations.
Pkg of 10: $3.60
Product Dimensions: 11mm x 10mm
Made in USA
Creative Reward Points you'll earn: 4

Stock Status: In Stock

Product Code:

11mm x 10mm diameter brass stamping shown with an antique heat patina. All stampings are raw and ready for your desired finish. Try Gilders Paste for colorful patinas and metallic finishes or Vintaj for faux, aged or colorful patina finishes.

Click here for Gilders Paste
Click here for Vintaj
Features & Videos
The sample shown above has an antique oxidized heat patina. Brass oxidizes to a beautiful warm brown color that is easy to reproduce.

Follow these easy instructions to create an antique oxidized heat patina on raw brass:

1. Abrade the surface of the metal lightly with a 30 grit 3M Bristle disc or Scotchbrite pad.
2. Heat the raw brass slowly with an oxidizing flame (for a butane torch, keep the end of the flame about 1 inch away from the surface of the metal). Heat slowly to build up oxidation. Air cool or quench in water and dry.
3. Remove the oxidation from the high spots by buffing lightly with a coarse Scotchbrite pad or wheel, or use a steel scratch brush.

Don't forget these...
Silver Solder Paste - Low Temp 1/2oz
Price: $9.20

Silver Solder Paste - Low Temp