Call Toll Free: 888.478.5060
Home | Login / My Account | Contact Us | View Cart
View Shopping Bag
Like Us on Facebook!

  Home > Findings & Chain > Brass Findings and Charms > Brass Settings >

  Brass Finding - Connector with 4mm Round Setting



 
This brass element was stamped using the original vintage die and press in use since 1904 in a factory that has been producing stampings and jewelry findings for 4 generations. Save bundles by using these raw stamping and adding your own finish. It's very quick and easy to patina or antique brass. Follow the instructions below for a wonderful finish.

1 Pak of 10: $0.56

Product Dimensions: 4mm x 10mm
Made in USA
Creative Reward Points you'll earn: 1


Product Code: BFD-121
Qty:

Details
 
4mm x 10mm stamped brass connector with 4mm round setting. Shown in raw brass.

The sample shown above has an antique oxidized heat patina. Brass oxidizes to a beautiful warm brown color that is easy to reproduce.

Follow these easy instructions to create an antique oxidized heat patina on raw brass:

1. Abrade the surface of the metal lightly with a 30 grit 3M Bristle disc or Scotchbrite pad.
2. Heat the raw brass slowly with an oxidizing flame (for a butane torch, keep the end of the flame about 1 inch away from the surface of the metal). Heat slowly to build up oxidation. Air cool or quench in water and dry.
3. Remove the oxidation from the high spots by buffing lightly with a coarse Scotchbrite pad or wheel, or use a steel scratch brush.

Don't forget these...
Silver Solder Paste - Low Temp
Price: $11.99
Add
Silver Solder Paste - Low Temp



Brass Finding - Connector with 4mm Oval or Marquise Setting
Brass Stamping - Filigree X Setting
Brass Stamping - Filigree Vase Bead Cap
Brass Stamping - Filigree Tatting Link
Brass Finding - Connector with 4mm Oval or Marquise Setting
Brass Stamping - Filigree X Setting
Brass Stamping - Filigree Vase Bead Cap
Brass Stamping - Filigree Tatting Link
$0.45
$2.75
$2.32
$2.70