Art Clay Bronze
Kiln Fire: 1508°F / 820°C - 2 hours (in activated carbon)Shrinkage: 10%-13%
Art Clay Bronze is a clay material to make a wide range of pieces such as jewelry, craft designs, and obj...
Kiln Fire: 1778°F / 970°C - 30 minutes (open shelf)Shrinkage: 10%
Torch/Hold Time: Red Glow/5-7 min
**Pieces smaller than a silver dollar can be torch fired.
Art Clay Copper
Art Clay Copper is a cl...
Art Clay Gold Clay 22K - 3 gram
Kiln Fire: 1814°F/993°C for 1 hour
Shrinkage: 15%
Torch Fire: Not recommended
Texture or draw directly on the surface of Art Clay Silver (fired piece), ceramic, por...
Art Clay Gold Paste
Kiln Fire: 1472°F / 800°C - 10 minutesShrinkage: 8-10%
Texture or draw directly on the surface of Art Clay Silver (fired piece), ceramic, porcelain and/or glass. 77.5% of the in...
Art Clay Silver Clay
Kiln Fire: 1200°F / 650°C - 30 minutes
Torch Fire: Red Glow for 5 minutes
Shrinkage: 8-9%
Consists of pure silver particles, binding agent and water. The binding agent is pr...
Art Clay Silver Overlay Paste
Kiln Fire: 1200°F / 649°C - 30 min hold time
Shrinkage: 8-9%
This silver metal clay is perfect for use with glass, ceramic, sterling silver and settings.
Note: Crash ...
Art Clay Silver Clay Syringe
Apply fine details, fill cracks, close seams, add piping and attach findings to wet or dry clay. Use for drawing decorations, building up 3D design, and filling up smal...
Art Clay Silver Paper
Kiln Fire: 1472°F / 800°C - 30 minutesShrinkage: 8-10%
Torch Fire: Not recommended
.999 Fine SilverYou can easily fold, bend, punch or cut shapes with a pair of scissors or pa...
Art Clay™ Silver Paper Plus 35 gram
Kiln Fire: 1472°F / 800°C - 30 minutesShrinkage: Approximately 10%
.999 Fine Silver This sturdy new formula of Art Clay Paper is 2.5 times thicker than original...
Art Clay Silver Paste
Kiln Fire: 1200°F / 649°C - 30 minutes
Shrinkage: 8-9%
The amount of water portion in the mixture of Paste Type is 2% higher than Art Clay Silver Clay Type. It is used to glu...
Art Clay Silver Paste
Kiln Fire: 1200°F / 649°C - 30 minutes
Shrinkage: 8-9%
The amount of water portion in the mixture of Paste Type is 2% higher than Art Clay Silver Clay Type. It is used to glu...
Showing 1 -12 of 12 items
Art Clay™
The Art Clay series of products are made of pure metal powders mixed with non-toxic binders and water. When kiln, torch or stove top fired, the binders burn away, leaving pure silver (99.9% silver), pure copper (more than 99.5% copper), or gold (22K).
Art Clay Silver
Consists of pure silver particles, binding agent and water. The binding agent is produced from natural pulp fiber.
During firing, the pure silver particles solidify, and turn into pure silver (over 99.96%) . The binding agent consists of carbon, hydrogen and oxygen, and when fired, results in the release of a small amount of carbon dioxide and steam during the firing process.
This product is low temperature - firing clay that can be fired from 650℃/1200°F, and turns into pure silver (over 99.96%) after firing. The special formula of this product allows for combining with glass, porcelain and ceramic materials, and is also suitable for firing with sterling silver finding or wire. (Use of SV925 and higher quality and the firing temperature at 650℃/1200°F, and holding time for 30 minutes is recommended).
The surface of the fired piece will be white and matte due to crystallization of silver during firing, but a luster can be obtained by polishing.
Art Clay Copper
Art Clay Copper is a clay material to make a wide range of pieces such as jewelry, craft designs, and objects like sculptures and models. Art Clay Copper can be fired in an electric kiln with or without using carbon, with the resulting fired piece being more than 99.5% pure Copper. (The percentage of copper in the clay state is 90%.)
Art Clay Bronze
Art Clay Bronze(TM) is a clay material to make a wide range of pieces such as jewelry, craft designs, and objects like sculptures and models. Art Clay Bronze must be fired in an activated carbon under reducing atmosphere using a programmable electric kiln, with the resulting fired piece being solid alloy (Copper 90%, Tin 10%).
Art Clay Gold
Art Clay Gold is a water-based gold clay that can be modeled in the same way as with the other Art Clay series products.
It will transform to high quality 22-Karat gold after firing.
Art Clay Gold consists of 22k gold powder, binding agent and water. The binding agent is produced from harmless pulp fiber.
Ingredient: 95% of indicated weight is K22 (Gold 91.7%, Silver 8.3%). After firing: K22 100%
Contracts about 15% during the firing process.
Choosing a selection results in a full page refresh.